Inscription
Confirmé
SMC

SYJ5000, Electrodistributeur 5 / 2, 5 / 3, à montage en ligne et sur embase (SYJ5120-5LOU-M5-Q)

SYJ5000, Electrodistributeur 5 / 2, 5 / 3, à montage en ligne et sur embase SYJ5120-5LOU-M5-Q

Référence pièce:

SYJ5120-5LOU-M5-Q
Réinitialiser
Quantité :
Loading...

Informations sur le produit

5-Port Solenoid Valve, Rubber Seal, SYJ5000 Series Specifications

SYJ5000 Series body ported type external appearance

SYJ5000 Series body ported type external appearance

SYJ5000 Series base mounted type external appearance

SYJ5000 Series base mounted type external appearance

*1: Response Time ms
(At 0.5 MPa) 		2 Position Single, Double 25 or less
3 Position 40 or less
Maximum Operating Frequency Hz 2 Position Single, Double 5
3 Position 3
Manual Operation Non-locking push type, push-turn locking type screwdriver-operated type, push-turn locking manual-operation type
Pilot Exhaust Method Pilot valve individual exhaust type, main valve / pilot valve common exhaust type
Lubrication Not required
Mounting Orientation Free
*2: Impact Resistance / Vibration Resistance: m/s2 150/30
Enclosure Dust-proof (*DIN terminal and M8 connector are IP65)

*Based on IEC60529.
*1: Based on JIS B8419:2010 dynamic performance testing. (Coil temperature 20°C, at rated voltage without surge voltage suppressor)
*2: Impact resistance: No malfunction occurred. The test was performed once for each condition, in both energized and de-energized states, in the axial and right angle directions of the armature. (Initial value)
Vibration resistance: No malfunction occurred in 1 sweep test between 45 and 2,000 Hz. The test was performed in both energized and de-energized states in the axial and right angle directions of the main valve/armature. (Initial value)

Solenoid Specifications

Electrical Entry Grommet (G) / (H), L-type plug connector (L)
M plug connector (M), DIN terminal (D) (Y), M8 connector (W)
G, H, L, M, W D, Y
Coil rated voltage (V) DC 24, 12, 6, 5, 3 24, 12
AC 50/60 Hz 100, 110, 200, 220
Allowable Voltage Fluctuation ±10% of rated voltage*
Power Consumption W DC Standard 0.35 (with light: 0.4) [0.94 (with DIN terminal light: 0.45)]
With power saving circuit 0.1 (only with light) *
[Startup 0.4, holding 0.1]
*Apparent Power VA AC 100 V 0.78 (with light: 0.81) 0.78 (with light: 0.87)
110 V
115 V 		0.86 (with light: 0.89)
[0.94 (with indicator light: 0.97)] 		0.86 (with light: 0.97)
[0.94 (with light: 1.07)]
200 V 1.18 (with light: 1.22) 1.15 (with light: 1.30)
220 V
[230 V] 		1.30 (with light: 1.34)
[1.42 (with light: 1.46)] 		1.27 (with light: 1.46)
[1.39 (with light: 1.60)]
Surge Voltage Suppressor Diode (varistor for DIN terminal and non-polar type are )
Indicator Light LED (neon bulb for DIN terminal AC)
  • *The 110 V AC and 115 V AC types are interchangeable. The 220 V AC and 230 V AC types are also interchangeable.
  • For 115 V AC and 230 V AC, the allowable voltage fluctuation is -15 to +5% of the rated voltage.
  • For details, see the SMC catalog.

Flow Rate Characteristics / Weight Table

Valve Model Numbers Switching Method Piping connection port diameter *1: Flow Rate Characteristics Weight (g) Notes 2, 3)
1, 5, 3
(P, EA, EB) 		4, 2
(A, B) 		1 → 4/2 (P → A/B) 4/2 → 5/3 (A/B → EA/EB) Grommet L Type, M Type
Plug connector 		DIN type
Terminal 		M8
Connector
C (dm3 / [s·bar]) b Cv C (dm3 / [s·bar]) b Cv
Body Ported Types SYJ5□20-□-M5 2 Position Single M5 ×; 0.8 M5 ×; 0.8 0.47 0.41 0.13 0.47 0.41 0.13 46 47 68 51
Double 64 66 108 74
3 Position Closed Center 0.49 0.44 0.13 0.44 0.40 0.12 75 77 119 85
Exhaust Center 0.46 0.37 0.12 0.47 [0.39] 0.43 [0.35] 0.13 [0.10]
Pressure Center 0.49 [0.39] 0.51 [0.38] 0.14 [0.10] 0.45 0.42 0.12
SYJ5□20-□-C4 2 Position Single M5 ×; 0.8 C4 (ø4 single-action fitting) 0.69 0.39 0.18 0.44 0.39 0.12 53 54 75 58
Double 71 73 115 81
3 Position Closed Center 0.69 0.40 0.19 0.43 0.40 0.12 82 84 126 72
Exhaust Center 0.56 0.40 0.15 0.41 [0.41] 0.37 [0.37] 0.10 [0.11]
Pressure Center 0.57 [0.41] 0.4 [0.37] 0.15 [0.10] 0.41 0.37 0.10
SYJ5□20-□-C6 2 Position Single M5 ×; 0.8 C6 (ø6 single-action fitting) 0.70 0.36 0.19 0.47 0.40 0.12 53 54 75 58
Double 71 73 115 81
3 Position Closed Center 0.72 0.37 0.19 0.44 0.34 0.12 82 84 126 92
Exhaust Center 0.67 0.54 0.19 0.41 [0.41] 0.38 [0.38] 0.11 [0.11]
Pressure Center 0.82 [0.44] 0.41 [0.39] 0.23 [0.12] 0.41 0.36 0.11
Base Mounted Type SYJ5□40-□-01 2 Position Single 1/8 1/8 0.79 0.21 0.19 0.83 0.32 0.21 80 (49) 81 (47) 102 (68) 51
Double 98 (64) 100 (66) 142 (108) 74
3 Position Closed Center 0.80 0.28 0.18 0.86 0.34 0.20 109 (75) 111 (77) 153 (119) 85
Exhaust Center 0.71 0.26 0.18 1.1 [0.60] 0.24 [0.44] 0.26 [0.18]
Pressure Center 0.99 [0.47] 0.29 [0.38] 0.24 [0.12] 0.72 0.38 0.18

*1: Values shown inside brackets are when at normal position. Exhaust center is 4/2 → 5/3, pressure center is 1 → 4/2.
*2: Values inside parentheses are for models without a sub-plate.
*3: Value for DC. AC single: 3 g, double / 3-position: add 6 g.

Structure Drawing

2 position single structure drawing

2 position single structure drawing

2-position single indicator symbol

2-position single indicator symbol

2-position double structure drawing

2-position double structure drawing

2-position double display symbol

2-position double display symbol

Component Parts

  • 1.Body material: Diecast aluminum / Urban white
  • 2.Piston plate material: Resin / Urban white
  • 3.End cover material: Resin / Urban white
  • 4.Piston material: Resin
  • 5.Spool valve assembly material: Aluminum, H-NBR
  • 6.Spool spring material: SUS
  • 7.Sub-plate* material: Diecast aluminum
  • 8.Pilot valve

*Add "-Q" to the end of model numbers for CE compliance.

Outline dimensional drawing

 

(Unit: mm)

 

Grommet (G), (H): SYJ5120-□G/H-M5 dimensional drawings

Grommet (G), (H): SYJ5120-□G/H-M5 dimensional drawings

 

(Unit: mm)

 

With bracket: SYJ5120-□G/H□□-M5-F dimensional drawings

With bracket: SYJ5120-□G/H□□-M5-F dimensional drawings

 

(Unit: mm)

 

Built-in single-action fitting type: SYJ5120-□G/H□□-C4/N3/C6/N7 (-F) dimensional drawings

Built-in single-action fitting type: SYJ5120-□G/H□□-C4/N3/C6/N7 (-F) dimensional drawings

 

(Unit: mm)

 

With bracket: SYJ5120-□G/H□□-M5-F dimensional drawings

With bracket: SYJ5120-□G/H□□-M5-F dimensional drawings

*See the manufacturer's catalog for information other than that above.

Liste des numéros de pièces

Nombre d’articles
  • 1
    • Référence pièce
    SYJ5120-5LOU-M5-Q

    Application

    Sens du montage

    Caractéristiques

    Nombre de solénoïdes

    Type à commutation

    État à la mise hors tension

    Tension

    Type à port de tuyau

    Filetage nominal de tuyauterie

    Diam. du cylindre applicable

    (Ø)

    Tuyauterie

    Valeur CV

    Diamètre du tube de raccordement

    Pression nominale

    (MPa)

    Alimentation en air piloté

    Interrupteur manuel

    Spécifications de bobine

    Entrée électrique du fil de sortie

    Manuel

    Témoin / Suppresseur de surtension

    Support

    Fabrication conforme aux spécifications de la commande

    Conformité CE

    Options de corps

    Compliance with IEC standards

    Type

    		Quantité minimale de commande
    Utilisation unique
    Direct
    Standard
    [Simple] Simple
    2 positions, normalement ouvert
    -
    24VDC
    M
    M5
    -
    Tuyauterie directe
    -
    -
    0.15 à 0.7
    Interne
    Non bloquant
    Standard
    Connecteur de prise L (sans connecteur)
    Non verrouillable, type à poussoir
    Avec témoin / suppresseur de surtension (non polarisé)
    Pas de support
    Aucun
    Oui
    Type d'échappement de vanne pilote individuelle
    -
    -
    1 pièces
    Prix unitaire (hors TVA)(Prix unitaire TTC)
    Jour d'expédition standard
    59.35 €
    ( 70.63 € )
    32 jours ouvrables
  • 1

    • Plus d'informations

    Informations de base

    SMC Solenoid Valve.
    [Features]
    · Improved pilot valve strength

    Attention

    • Les images des produits peuvent être représentatives. Reportez-vous au catalogue du fabricant pour plus de détails.
    La référence pièce a été confirmé