- Caractéristiques
- Nombre de solénoïdes
- Double
- Type à commutation
- Tension
- Type à port de tuyau
- M
- Filetage nominal de tuyauterie
- Type de joint
- Alimentation en air piloté
- Interrupteur manuel
- Entrée électrique du fil de sortie
- Témoin / Suppresseur de surtension
- Support
- Taille de corps
- Fonctions
- Type of fitting thread part
- Type
- CAO
- 2D
- 3D
- Jours d'expédition estimés
- Tout
- Dans les 26 jours ouvrables
VQZ*2*, Série 1000 / 2000 / 3000, Electrodistributeur 5 / 2, 5 / 3, joint élastique, montage en ligne (VQZ1221-5L1-M5-Q)
Informations sur le produit
5-Port Solenoid Valve VQZ1000/VQZ2000/VQZ3000 Series, Body-Ported Type, Plug Lead Unit, Single Unit Specifications
VQZ1000/VQZ2000/VQZ3000 Series external appearance
| Series | Metal Seal | Rubber Seal | ||
|---|---|---|---|---|
| Usable Fluids | Air | |||
| Maximum Operating Pressure (MPa) | 0.7 (High-pressure type: 1.0 | 0.7 | ||
| Minimum Operating Pressure MPa | 2 Position | Single | 0.1 VQZ3000, 3 position only 0.15 | 0.15 |
| 0.1 | ||||
| 3 Position | Double | 0.2 | ||
| Ambient Temperature and Operating Fluid Temperature °C | -10 to 50 (no freezing) | |||
| Maximum Operating Frequency Hz | 2 Position Single, Double | 20 | 5 | |
| 3 Position | 10 | 3 | ||
| Manual | Non-locking push type, locking type (tool required) | |||
| Pilot Exhaust Method | Individual exhaust type | |||
| Lubrication | Not required | |||
| Mounting Orientation | Single: free Double / 3 position: main valve must be horizontal | Free | ||
| Impact Resistance / Vibration Resistance: m/s2 *1: | 150/30 | |||
| Protective structure*3 | Dust-proof (DIN terminal: IP65 *2:) | |||
*1: Impact resistance: No malfunctions after testing under the following conditions: in the axial direction and at a right angle to the main valve and armature in both energized and non-energized states (once for each condition state). (Initial value)
Vibration resistance: No malfunctions occurred in a 1-sweep test between 45 and 2,000 Hz. The test was performed in both energized and non-energized states and in the axial direction and at right angles to the main valve and armature. (Initial value)
*2: VQZ2/3□21□-□Y□□W1-□-□ when IP65 compatible DIN terminal is selected
*3: Based on IEC60529.
Solenoid Specifications
| Electrical Entry | Grommet (G) M-type plug connector (M) L-type plug connector (L) DIN terminal (Y) | |||
|---|---|---|---|---|
| G, L, M | Y | |||
| Coil rated voltage (V) | DC | 24, 12 | ||
| AC 50/60 Hz | 100, 110, 200, 220 * | |||
| Allowable Voltage Fluctuation | ±10% of rated voltage | |||
| Power Consumption W | DC | Standard | 0.35 (with light: 0.4) [0.94 (with DIN terminal light: 0.45)] | |
| High Speed Response, High Pressure | 0.9 (with light: 0.95) [0.95 (with DIN terminal light: 1.0)] | |||
| Apparent power VA * | AC | 100 V | 0.78 (with light: 0.81) | 0.78 (with light: 0.87) |
| 110 V 115 V | 0.86 (with light: 0.89) [0.94 (with indicator light: 0.97)] | 0.86 (with light: 0.87) [0.94 (with light: 1.07)] | ||
| 200 V | 1.18 (with light: 1.22) | 1.15 (with light: 1.30) | ||
| 220 V [230 V] | 1.30 (with light: 1.34) [1.42 (with light: 1.46)] | 1.27 (with light: 1.46) [1.39 (with light: 1.60)] | ||
| Surge Voltage Suppressor | Varistor | |||
| Indicator Light | LED (neon bulb for DIN terminal AC) | |||
- *The 110 V AC and 115 V AC types are interchangeable. The 220 V AC and 230 V AC types are also interchangeable.
- For 115 V AC and 230 V AC, the allowable voltage fluctuation is -15 to +5% of the rated voltage.
Structure Drawing
Metal seal type
2 position single structure drawing
2-position single connection drawing
2-position double structure drawing
2-position double connection drawing
Rubber seal type
2 position single structure drawing
2-position single connection drawing
2-position double structure drawing
2-position double connection drawing
Component Parts
| Number | Part name | Material | Note |
|---|---|---|---|
| 1 | Body | Die-cast aluminum | - |
| 2 | Spool/Sleeve | Stainless steel | Metal Seal |
| Spool Valve | Aluminum/HNBR | Rubber Seal | |
| 3 | Piston | Resin | - |
| 4 | Pilot Valve Assembly | - | - |
Dimensional Outline Drawings / VQZ1000
2-position single
(Unit: mm)
Grommet (G): VQZ1120/1-□G□1-C3, C4, C6 dimensional drawings
Precautions
- *Use the standard (DC) specification for continuous duty.
- *See the manufacturer's catalog for models of single-action fittings and silencers that mount to this valve.
- *Manifold mounting screws and gaskets are not included when ordering single unit body ported type solenoid valves. Please order separately if required. (See the manufacturer's catalog for details.)
- *See the manufacturer's catalog for information other than the above.
Plus d'informations
Informations de base
SMC Solenoid Valve.
[Features]
· Can be DIN rail mounted
· IP65-compliant protective structure (DIN terminal type, common exhaust).
· Choice of metal or rubber seal available for the main valve construction.
· Built-in one-touch fitting makes piping work easy
Attention
- Les images des produits peuvent être représentatives. Reportez-vous au catalogue du fabricant pour plus de détails.