Inscription
Configurer
SMC

VQ20 / 30, Electrodistributeur 2 / 2, commande asservie (VQ21A1-5YOB-C6-F-Q)

VQ20 / 30, Electrodistributeur 2 / 2, commande asservie VQ21A1-5YOB-C6-F-Q

Référence pièce:

VQ21A1-5YOB-C6-F-Q
Réinitialiser
Quantité :

Informations sur le produit

2-Port Solenoid Valve (Pilot Operated, For Dry Air) Single Unit Specifications

VQ20 External Appearance

VQ20 External Appearance

VQ30 external appearance

VQ30 external appearance

Symbols

Symbols

When the valve is closed, IN and OUT are blocked. However, if the pressure in port 2 is greater than the pressure in port 1, the fluid cannot be blocked.

Standard Specification Table

Valve Specifications Series VQ20 VQ30
Valve Construction Pilot operated 2-port poppet type
Usable Fluids Air*1
Ambient Temperature and Operating Fluid Temperature -10 to 50°C *2
Lubrication Not required
Manual Operation Locking type (tool required)*3
Impact Resistance / Vibration Resistance 150 / 30 m/s2 *4
Enclosure Dust-proof*5
Internal leakage cm3/min 15 or less
External leakage cm3/min 15 or less
Mounting Orientation Free
Weight 46 g 80 g
Electrical Specifications Coil Rated Voltage 12 V DC, 24 V DC, 100 V AC, 110 V AC, 200 V AC, 220 V AC
Allowable Voltage Fluctuation ±10% of rated voltage
Coil Insulation Type Class B or equivalent
Power Consumption DC (with power-saving circuit) Inrush: 2.9 W Holding: 0.6 W
DC (without power-saving circuit) 2.9 W
AC 2 VA
Electrical Entry Grommet, DIN terminal
  • *1This product is for dry air. Use in clean air and take care that drain and oil content do not get into this product.
  • *2Use dry air when operating at low temperatures and with no condensation.
  • *3Manual operation is available for DIN terminal type only.
  • *4Vibration resistance: No malfunction occurred in 1 sweep test between 8.3 and 2,000 Hz. The test was performed in both energized and de-energized states in the axial and right angle directions of the main valve/armature. (Initial value)
    Impact resistance: No malfunctions after testing using a drop-type impact tester under the following conditions: in the axial direction and at a right angle to the main valve and armature in both energized and non-energized states (once for each condition state). (Initial value)
  • *5DIN terminal type supports dust-proof and blow-proof (IP65) performance.

Structure Drawing

Pilot Operated 2-Port Solenoid Valve For Dry Air structure drawing

Pilot Operated 2-Port Solenoid Valve For Dry Air structure drawing

Number Part name Material
1 Solenoid coil -
2 Body Resin
3 Fixed core SUS
4 Armature SUS
5 Return Spring SUS
6 Poppet NBR
7 Diaphragm assembly H NBR / Resin

Outline dimensional drawing

VQ20 Series

 

(Unit: mm)

 

Inline type / Grommet (G) VQ21A1-□G□-□-□ dimensional drawing 1

Inline type / Grommet (G) VQ21A1-□G□-□-□ dimensional drawing 1

Inline type / Grommet (G) VQ21A1-□G□-□-□ dimensional drawing 2

Inline type / Grommet (G) VQ21A1-□G□-□-□ dimensional drawing 2

*Broken line indicates bracket mounting type (-F).

L type / Grommet (G) VQ21A1-□G□-□-L□ dimensional drawing 1

L type / Grommet (G) VQ21A1-□G□-□-L□ dimensional drawing 1

L type / Grommet (G) VQ21A1-□G□-□-L□ dimensional drawing 2

L type / Grommet (G) VQ21A1-□G□-□-L□ dimensional drawing 2

*Broken line indicates bracket mounting type (-LF).

VQ30 Series

 

(Unit: mm)

 

DIN terminal (Y) VQ31A1-□Y□□-□-□ dimensional drawing 1

DIN terminal (Y) VQ31A1-□Y□□-□-□ dimensional drawing 1

DIN terminal (Y) VQ31A1-□Y□□-□-□ dimensional drawing 2

DIN terminal (Y) VQ31A1-□Y□□-□-□ dimensional drawing 2

*Broken line indicates bracket mounting type (-F).

Precautions

  • *Product images may be representative images. Refer to the manufacturer's catalog for shape details.
  • *See the SMC catalog for product information other than that detailed above.

Liste des numéros de pièces

Nombre d’articles
  • 1
    • Référence pièce
    VQ21A1-5YOB-C6-F-Q

    Application

    Sens du montage

    Caractéristiques

    Tension

    Tuyauterie

    Valeur CV

    Diamètre du tube de raccordement

    Pression nominale

    (MPa)

    Interrupteur manuel

    Entrée électrique du fil de sortie

    Manuel

    Témoin / Suppresseur de surtension

    Fabrication conforme aux spécifications de la commande

    Conformité CE

    Options de corps

    		Quantité minimale de commande
    Utilisation unique
    Direct
    Standard / Résistant aux gouttes d'eau / Sans lubrification
    24VDC
    Tuyauterie directe
    0.33
    Ø6
    0,1 à 0,6
    Verrou
    Borne DIN sans connecteur
    Type de verrouillage (outil requis)
    Avec circuit d'économie d'énergie (avec suppresseur de surtension)
    -
    Oui
    Avec support
    1 pièces
    Prix unitaire (hors TVA)(Prix unitaire TTC)
    Jour d'expédition standard
    45.65 €
    ( 54.32 € )
    26 jours ouvrables
  • 1

    • Plus d'informations

    Informations de base

    SMC Solenoid Valve.
    [Features]
    · Compact and lightweight yet with a large flow capacity
    · High frequency operation
    · Long operating life
    · Built-in one-touch fitting makes piping work easy.
    · DIN connector type, dust-proof, jet-proof (IP65) type enclosure compliant.
    · Air-blowing workpieces, blowing-off, etc.

    Attention

    • Les images des produits peuvent être représentatives. Reportez-vous au catalogue du fabricant pour plus de détails.