ZQ, Combinaison de venturis compact
[Features]
· Push button type for easier operation.
· Vacuum pressure switch with LED display.
· Can copy up to 10 switches simultaneously.
· Settings for the master side (copy source) sensor can be copied to slave side sensors.
· Reduced setting work.
· Helps prevent setting mistakes.
(i)Remarque
- The product images are representative images only. Refer to the manufacturer's catalog for shape details.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
- Données produit
- Données CAO non disponibles
Space Saving Vacuum Ejector ZQ Series Specifications
Space Saving Vacuum Ejector ZQ Series external appearance 1
Space Saving Vacuum Ejector ZQ Series external appearance 2
Ejector Specifications
| Model | ZQ105 | ZQ107 | ZQ110 | |
|---|---|---|---|---|
| Nozzle Diameter (mm) | 0.5 | 0.7 | 1.0 | |
| Maximum Suction Flow Rate L/min (ANR) | 5 | 10 | 22 | |
| Air Consumption L/min (ANR) | 14 | 23 | 46 | |
| Maximum Vacuum Pressure | -80 kPa | |||
| Supply Pressure Range | Air Pressure Supply (P) Port | 0.3 to 0.5 MPa (For normally open type: 0.3 to 0.45 MPa) | ||
| Release Pressure Supply (PD) Port | 0.3 to 0.5 MPa (For normally open type: 0.3 to 0.45 MPa) And PD pressure ≥ P pressure | |||
| Standard Supply Pressure Note: | 0.35 MPa | 0.43 MPa | ||
| Operating Temperature Range | 5 to 50°C | |||
| Usable Fluids | Air | |||
Note: The maximum suction flow rate was obtained at the standard supply pressure.
Product Weight
- With suction filter (single unit): 95 g (*1)
- With vacuum pressure switch + suction filter (single unit): 109 g (*2)
- End plate assembly for manifold: 122 g
- *1 Includes 0.3-m connector for supply valve and release valve.
- *2 Includes a 0.3‑m connector for supply valve and release valve and a 2‑m connector for vacuum pressure switch.
Manifold Type Weight Calculation
(Unit weight) ×; number of stations + (weight of end plate assembly for manifold)
Example: Eight stations with a vacuum pressure switch and suction filter
109 g ×; 8 + 122 g = 994 g
Product Supply And Release Valves
| Type | Normally Closed Type | Latching Type | Normally Open Type | ||
|---|---|---|---|---|---|
| Standard Type (1 W) | Low Wattage Type (0.5 W) | ||||
| Model (Refer to the section on ordering solenoid valves on p. 107) | VQ110-□ | VQ110Y-□ | VQ110L-□ VQ110N-□ | ZQ1-VQ120-□ | |
| Manual Operation | Non-locking push type / locking type (tool required) | Push-lock type | Non-locking push type / locking type (tool required) | ||
| Coil Rated Voltage | 12/24 V DC, 100/110/200/220 V AC | 12/24 V DC | 12/24 V DC, 100/110/200/220 V AC | 12/24 V DC | |
| Power Consumption (Current Value) | DC | 1 W | 0.5 W | 1 W | |
| AC 100 V | 0.5 VA (5 mA) | - | 0.6 VA (6 mA) | - | |
| 110 V AC | 0.55 VA (5 mA) | - | 0.65 VA (5.9 m) | - | |
| 200 V AC | 1.0 VA (5 mA) | - | 1.2 VA (6 mA) | - | |
| 220 V AC | 1.1 VA (5 mA) | - | 1.3 VA (5.9 mA) | - | |
| Electrical Entry | Grommet, L-type plug connector (with light / surge voltage suppressor) | L-type plug connector (With light / surge voltage suppressor) | Grommet, L-type plug connector (With light / surge voltage suppressor) | ||
Vacuum Pressure Switch Specifications
| Model | ZQ1-ZSE (ZSE10) | ZQ1-ZSE (ZSE10F) | ||
|---|---|---|---|---|
| Rated Pressure Range | 0 to -101 kPa | -100 to 100 kPa | ||
| Set Pressure Range / Display Pressure Range | 10 to -105 kPa | -105 to 105 kPa | ||
| Withstand Pressure | 500 kPa | |||
| Minimum Setting Unit | 0.1 kPa | |||
| Power Supply Voltage | 12 to 24 V DC ±10%, ripple (p-p) 10% or less (with power supply polarity protection) | |||
| Current Consumption | 40 mA or less | |||
| Switch Output | - | NPN or PNP open collector 2 outputs (selectable) | ||
| Maximum Load Current | 80 mA | |||
| Maximum Applied Voltage | 28 V (with NPN output) | |||
| Residual Voltage | 2 V or less (with load current of 80 mA) | |||
| Response Time | 2.5 ms or less (with anti-chattering function: 20, 100, 500, 1,000, 2,000 ms selectable) | |||
| Short Circuit Protection | Equipped | |||
| Repeatability | ±0.2% F.S. ±1 digit | |||
| Hysteresis | Hysteresis Mode | Variable from 0 Note 1: | ||
| Window Comparator Mode | ||||
| Analog Output | Voltage Output | Output Voltage (Rated Pressure Range) | 1 to 5 V ±2.5% F.S. | |
| Linearity | ±1% F.S. or less | |||
| Output Impedance | Approx. 1 k Ω | |||
| Display System | 3 1/2-digit, 7-segment LED, 1 color display (red) | |||
| Display Accuracy | ±2% F.S. ±1 digit (with ambient temperature of 25°C ±3°C) | |||
| Operation Indicator Light | Lights when ON, OUT1: green, OUT2: red | |||
| Environmental Resistance | Enclosure | IP40 | ||
| Operating Humidity Range | Operating/stored: 35 to 85% RH (no condensation) | |||
| Withstand Voltage | 1,000 V AC for 1 min. between live parts and housing | |||
| Insulation Resistance | 50 MΩ or more (500 V DC measured with megohmmeter) between live parts and housing | |||
| Temperature Characteristics | ±2% F.S. (at 25°C of operating temperature range: -5 to +50°C) | |||
| Lead Wires | Oil-resistant cabtire cord Conductor cross-sectional area: 0.15 mm2 (AWG26), 5 cores, 2 m, insulator outer diameter: 1.0 mm | |||
Note 1: If the applied voltage fluctuates around the set value, the hysteresis must be set to a value more than the width of the fluctuations or chattering will occur.
Note 2: For specifications not listed, ejector specifications apply.
Product Exhaust Characteristics
ZQ105 exhaust characteristics
ZQ107 exhaust characteristics
ZQ110 exhaust characteristics
Single Unit and Manifold Structural Drawing / Components and Replacement Parts
Single unit structural drawing
Manifold structural drawing
Components
| Number | Part Name | Material |
|---|---|---|
| 1 | Poppet Valve Assembly | - |
| 2 | Nozzle | Resin |
| 3 | Diffuser | Resin |
| 4 | Vacuum Break Flow Adjusting Needle | Stainless steel |
Replacement Parts
| Number | Part Name | Material | Part number |
|---|---|---|---|
| 5 | Solenoid valve | - | Refer to p. 107 for details |
| 6 | Filter Element | PVA sponge | XT534-5-001-AS |
| 7 | Sound absorption material 1 (for single units) | PVA sponge | ZQ-SAE |
| 8 | Vacuum Pressure Switch | - | Refer to p. 107 for details |
| 9 | Fitting | - | - |
| 10 | Sound absorption material 2 (for manifolds) | PVA sponge | ZZQ-SAE |
Product Drawings
(Unit: mm)
J1 Type ZQ1□1U-J1□□□□-□□□□□-□□
J1 type ZQ1□1U-J1□□□□-□□□□□-□□ dimensional drawing
J1 type ZQ1□1U-J1□□□□-□□□□□-□□ circuit diagram
Note 1: Drawing is of the ZQ1□1U-J1□5/6L-E□□G□-00. For the ZQ1□1U-J1□□□□-F□-00, the overall length is 87.2 mm.
Note 2: The dimensions after bracket A is mounted are the same as those of the K1 type.
Note 3: When mounting the body, tighten to a torque of 0.6 ±0.06 N·m. Using excessive torque may cause damage to the body.
Note 4: For the ZQ series, the pitches of the P, V and PE ports are determined assuming the use of one-touch fittings.
If used with other fittings, these may cause interference, dependent on their type and size. Refer to the manufacturer's catalog to confirm the sizes of the fittings before use.
Manifold Type Increase/Decrease Method
Manifold Type Increase/Decrease Method
Components
| Number | Part Name | Part Number |
|---|---|---|
| 1 | Hexagon Socket Head Cap Screw | See the section on ordering below |
| 2 | End Block L | See Table 1 (includes (6) × 1 pc.) |
| 3 | End Block R | See Table 1 (includes (5) × 1 pc.) |
| 4 | Ejector Assembly | ZQ1□□3M-□□□□□□-□□□□□-□(-Q) Note 1: (Includes (5) and (6) × 1 of each) |
| 5 | Ejector Body Gasket for Manifolds | ZQ-3-005-10AS Note 2: |
| 6 | Gasket for Exhaust Block | ZQ-3-009-10AS Note 2: |
Note 1: Refer to pp. 102–103 of the manufacturer's catalog for details on ordering.
Note 2: This part number is a 10-piece set.
Table 1
| Part Name | With PD Port | Without PD Port |
|---|---|---|
| End Block L | ZQ1L-2-BSB-AS | ZQ1L-1-BSB-AS |
| End Block R | ZQ1R-2-BSB-AS | ZQ1R-1-BSB-AS |
Working Procedure
Disassembly
Loosen and remove clamp rod (1).
Assembly
- 1. Install the ejector body gasket for manifolds (5) into the gasket groove of each ejector assembly (4). Install the exhaust block gasket (6) around the projected part.
- 2. Install the exhaust block gasket (6) around the projected part of end block L (2).
- 3. Install the ejector body gasket for manifolds (5) into the gasket groove of end block R (3).
- 4. Align the ejector assembly (4), end block L (2) and end block R (3) using locating pins (at the 2 'a' positions) and fasten with the clamp rods (1) (× 2 pcs.) (Tightening torque: 0.6 N·m ±0.06 N·m)
*Refer to the manufacturer's catalog for product information not detailed above.
Référence pièce
|
|---|
| ZQ1101U-K1Y5L-EBG-00-Q |
| ZQ1101U-K15L-EBG-00-Q |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Plage de températures de fonctionnement (°C) | Support A | Fonction | |
|---|---|---|---|---|---|---|---|
384.69 € | 1 | 39 jours | 5:50 | - | Type de faible puissance DC (0.5W) | ||
383.15 € | 1 | 39 jours | 5～ 50 | Avec support A | Type standard (1W pour DC) |
Loading...
Informations de base
| Type | Unité | Fonction supplémentaire | Silencieux / Filtre | Vide limite(kPa) | -80 |
|---|---|---|---|---|---|
| Débit de consommation d'air(l/min) | 46 | Forme du port de connexion du port de vide | M5 | Forme du port de connexion du port d'alimentation en air | M5 |
| Catégorie de fonctionnement | Normalement fermés | Application | Article seul | Plage de pression de fonctionnement(MPa) | 0.3::0.5 |
| Débit d'aspiration(l/min) | 22 | Diam. de buse | 1,0mm | Combinaison de la vanne d'alimentation et du clapet de décharge | Normalement fermé / Normalement fermé |
| Entrée électrique | Connecteur de prise de type L, fil de sortie : 0.3m (avec témoin / suppresseur de surtension) | Spécifications de sortie | Sorties de collecteur ouvert PNP 2 (0 à -101kPa) | Spécifications de l'unité | Avec fonction de sélection d'unité |
| Tension nominale d'électrovanne | 24VDC | Entrée électrique de commutateur de vide | Fil de sortie avec connecteur (longueur du fil de sortie : 2m), avec couvercle de connecteur | Marquage CE | Marquage CE |
| Type de vanne | Non | Neutralisation manuelle | Type à poussoir non verrouillable |
Configurer
Propriétés de base
-
Support A
- Avec support A
-
Fonction
- Type de faible puissance DC (0.5W)
- Type standard (1W pour DC)
-
Type
- ZQ110
Filtrer par jours d'expédition standard
-
- Tous les articles
- 39 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.