SFB, Filtre à air pour Salle Blanche Modèle à cartouche / Modèle droit (SFB302-02)

SFB, Filtre à air pour Salle Blanche Modèle à cartouche / Modèle droit SFB302-02

Détails du produit:

Référence fabricant: SFB302-02

Marque: SMC

Prix: 402.40

Délai de livraison: 26 jours


Données techniques:

Type de connexion: TSJ

Specifications: Type jetable (taille étroite)


(i)Remarque

  • ■ SMC Product Line
    Webpages for products currently without individual pages on this site will be released on an ad-hoc basis.
    Click here for a quotation or to make an order if you have a model number.

    ■ Products Planned for Online Release
    Air cylinder-related product pages will be released on this site on an ad-hoc basis.
    CQ2, MG types, etc., are already available. Click here to check.
    *Vacuum equipment, FRLs, solenoid valves, etc., will also be released on dedicated pages on this site on an ad-hoc basis.
    *The information above is correct as of December 2018.
  • See catalog for specification details.
  • Product images may be representative images. Refer to the catalog for details.

Référence pièce

Vous pouvez trouver ici le numéro
de référence lié au produit recherché.

SFB302-02

Clean Gas Filter: Disposable Type / Straight Type, SFB300 Series Specifications

Disposable Type / Straight Type, SFB300 Series external appearance

Disposable Type / Straight Type, SFB300 Series external appearance

SFB30□-02 flow rate characteristics graph

SFB30□-02 flow rate characteristics graph

Fluid: Compressed air / Inlet temperature: 20°C

Applicable Fluid Air, nitrogen
Operating Pressure*1 MAX. 0.99 MPa, Vacuum 1.3 ×; 10-6 kPa
Operating Temperature 5 to 120℃
Element Proof Differential Pressure MAX. 0.5 MPa
Element Reverse Differential Pressure MAX. 0.07 MPa
Filtration*2 0.01 μm (filtration efficiency 99.99%)
Helium Leak Volume 4.0 ×; 10-9 Pa·m3/sec or less
Main Material Case/Cover SUS316 (Interior/Exterior: Electrolytic polishing)
Filtration Medium PTFE membrane
Bracket SUS304

*1: The maximum operating pressure is 0.99 MPa since this product does not conform to the High Pressure Gas Safety Law (Japan). Ensure that, if 0.1 MPa is exceeded, there is no pressure fluctuation during use.
*2: Measured under manufacturer's specified conditions.

Model

Model Rated Flow L/min (ANR)* Connection Filtration Area cm2 Weight (kg)
SFB300-02 45 Rc 1/4 (female thread) 10 0.14
SFB302-02 TSJ 1/4 0.15
SFB305-02 URJ 1/4 0.14
SFB315-02 URJ 1/4 0.15

*At inlet pressure of 0.7 MPa and pressure drop of 0.02 MPa.

Product Diagram

Disposable Type / Straight Type, SFB300 Series diagram

Disposable Type / Straight Type, SFB300 Series diagram

Number Part name Material Note
1 Case SUS 316 Electrolytic polishing (interior/exterior)
2 Cover
3 Element PTFE membrane -
4 Bracket SUS304 -

Product Outline Dimensional Drawing

 

(Unit: mm)

 

SFB300-02 dimensional drawing

SFB300-02 dimensional drawing

  • SFB300-02: Rc 1/4
 

 

(Unit: mm)

 

SFB302-02 dimensional drawing

SFB302-02 dimensional drawing

  • SFB302-02: TSJ1/4 (Tube Swage Joint)
 

 

(Unit: mm)

 

SFB305-02/SFB315-02 dimensional drawing

SFB305-02/SFB315-02 dimensional drawing

  • SFB305-02: URJ 1/4 (Union Ring Joint), A/79 mm
  • SFB315-02: URJ 1/4 (Union Ring Joint) A/84 mm

Precautions

  • *Ensure that you read the specific product precautions prior to use.
  • *Confirm the specifications. The Clean Gas Filter is designed for use with compressed air and nitrogen gas only. Do not use with fluids (gases) other than those stated in the specifications, and do not exceed the specified ranges for pressure or temperature, as this will cause damage, etc.
  • *Select a product according to the maximum consumption flow rate. When using compressed air for air blow applications, etc., calculate the maximum volume of air that will be consumed before selecting the SF□ series product size. (Using a product that exceeds the maximum air flow and running excessive compressed air can cause the cleanliness of the compressed air to deteriorate and/or damage the element.)
  • *Set the processing flow rate with an initial pressure drop of 0.02 MPa or less. If the initial pressure drop is set too high, the service life will be shorter due to clogging.
  • *See the manufacturer's catalog for product information other than the above.
  • *Product pictures are example representations for the product series. Please be aware that actual product specifications may be different.
Référence pièce
SFB302-02
Référence pièce
Prix unitaire standard
Quantité minimale de commandeRemise sur volume
Jour
d'expédition standard
?
Type de connexion Specifications

402.40 €

1 26 jours TSJType jetable (taille étroite)

Loading...

  1. 1

Informations de base

Type Standard Qualité de l'air comprimé General Dry Air Niveau de filtration 0.01μm
Débit d'air servant au traitement(l/min) 45 Filetage nominal de tuyauterie 1/4 Environnement de fonctionnement Clean Room Specifications (Prevent dust)
Robinet de purge NA Matériau de la cuve Alliage d'aluminium Protection de cuve NA
Plage de pression de fonctionnement(MPa) nul::0.99

Vous vous trouvez sur la page de SFB, Filtre à air pour Salle Blanche Modèle à cartouche / Modèle droit, le numéro d'article est le suivant: SFB302-02.
Veuillez trouver plus de détails concernant les particularités et les dimensions sous le numéro d'article SFB302-02.

Variantes de ce produit

Référence pièce
SFB300-02
SFB305-02
SFB315-02
Référence piècePrix unitaire standardQuantité minimale de commandeRemise sur volumeJour
d'expédition standard
?
Type de connexion Specifications

308.19 €

1 4 jours [Tuyauterie à simple pression] Tuyau à simple effetType jetable (taille étroite)

402.40 €

1 26 jours URJType jetable (taille étroite)

402.40 €

1 4 jours URJType jetable (taille longue)

Assistance technique