- Force de préhension (avec 0.5Mpa à l'ouverture)(N)
- 6.5
- Force de préhension (avec 0.5Mpa à la fermeture)(N)
- 7
- Diamètre interne du vérin(mm)
- 10
- Commutateur auto
- Nombre de commutateurs
- Longueur du fil de sortie
- Type de connecteur pour l'ouverture / la fermeture de la pince
- Emplacement de port de connexion
- Type
- CAO
- 2D
- 3D
- Jours d'expédition estimés
- Tout
- Dans les 26 jours ouvrables
MHR3, Pince pneumatique, 3 doigts, actionneur rotatif (MDHR3-10E-M9B)
Informations sur le produit
MHR3/MDHR3 Series 3-Finger Type Rotary Actuated Air Gripper features
| Nominal | 10 | 15 | |
|---|---|---|---|
| Action | Double acting | ||
| Gripping force (effective value) N at 0.5 MPa*1 | Outer-diameter gripping force | 7 | 13 |
| Inner-diameter gripping force | 6.5 | 12 | |
| Opening/closing stroke (diameter) | Finger closing width (mm) | 16 | 19 |
| Finger opening width (mm) | 22 | 27 | |
| Stroke (mm) | 6 | 8 | |
| Weight g*2 | 120 (125) | 225 (230) | |
| Connection port | M3 ×; 0.5 | ||
| Repeatability | ±0.01 mm | ||
| Fluid | Air | ||
| Operating pressure | 0.2 to 0.6 MPa | 0.15 to 0.6 MPa | |
| Ambient and fluid temperature | 0 to 60°C | ||
| Maximum operating frequency | 180 c.p.m | ||
| Lubrication | Non-lube*3 | ||
- *1For the gripping force at each gripping point, refer to the data in "Effective Gripping Force" in the manufacturer's catalog.
The effective gripping force is the value at the middle position of the opening/closing stroke. - *2Values in parentheses () show the MDHR weight. However, it does not include auto switch weight.
- *3Use this product with no lubrication. Using lubrication could cause sticking or slipping.
- *When the finger opening/closing speed is set as the total stroke of 0.2 seconds or more, it may cause the product to stick or completely stop its movement.
Structure drawing
MHR3, MDHR3 structure drawing
MDHR3 structure drawing (01)
MDHR3 structure drawing (02)
Component parts
| No. | Description | Material | Note |
|---|---|---|---|
| 1 | Body | Aluminum alloy | Hard anodizing |
| 2 | Adapter body | Aluminum alloy | Hard anodizing |
| 3 | Guide holder | Stainless steel | - |
| 4 | Cam | Cold rolled steel plate | Nitrided |
| 5 | Finger assembly | Stainless steel | Heat treated |
| 6 | Guide | Stainless steel | Heat treated |
| 7 | Pin | Carbon steel | Heat treated Electroless nickel plating |
| 8 | Pin roller | Stainless steel | Nitrided |
| 9 | Vane shaft | Stainless steel, NBR | - |
| 10 | Joint bolt | Chrome molybdenum steel | Zinc chromated |
| 11 | Stopper | Resin | - |
| No. | Description | Material | Note |
|---|---|---|---|
| 12 | Back-up ring | Stainless steel plate | - |
| 13 | Hex socket head cap screw | Stainless steel | - |
| 14 | Bearing | High carbon chrome bearing steel | - |
| 15 | Cylindrical roller | Stainless steel | - |
| 16 | Magnet | - | - |
| 17 | Magnet holder | Aluminum alloy | Hard anodizing |
| 18 | Roller | Stainless steel | - |
| 19 | Cover | Aluminum alloy | Hard anodizing |
| 20 | "O-ring | NBR | - |
| 21 | Stopper seal | NBR | - |
Replacement Parts
| Part name | M□HR3-10□ | M□HR3-15□ | Main parts |
|---|---|---|---|
| Cover | P3313128 | P3313228 | (19) |
External dimensional drawing
Nominal Size 10
(Unit: mm)
Dimensions: without auto switch MHR3-10R
(Unit: mm)
With auto switch (built-in magnet): MDHR3-10R
(Unit: mm)
MDHR3-10E port location
Dimensional Differences between MHR and MDHR
Model: MHR3-10R: A = 5 mm, MDHR3-10R: A = 4.7 mm
- *Note that the dimensions in the figure on the left are different for the MHR series and the MDHR series. In addition, the body shapes are different depending on the auto switch mounting groove.
- *For other specifications and dimensions, refer to the manufacturer's catalog.
Plus d'informations
Informations de base
A hand chuck featuring high rigidity and a high degree of mounting direction flexibility.
[Features]
· High repeatability: ±0.01 mm.
· Utilizes a parallel opening and closing mechanism with cross roller guide for a smooth action free from play, ensuring high precision and a long service life.
· Use of rotary actuators for part of the actuator makes it possible to have a more compact design.
· High degree of mounting direction flexibility.
· The D-M9 solid state auto switch with indicator light can be mounted for easy working-position detecting.
· High rigidity type.
· Connection ports on 2 sides.
· Supports both inner- and outer-diameter gripping.
Attention
- See the catalog for specification details.
- Product images may be representative images. Refer to the manufacturer's catalog for shape details.