• Nous vous informons qu’en raison du Corona virus, notre production présente en chine a été transférée sur un autre site depuis le 29 janvier 2020. De ce fait, les délais de livraison peuvent être plus importants pour une partie de nos produits.

Pince pneumatique de type angulaire gamme MHC2-6/MHCA2-6

Pince pneumatique de type angulaire gamme MHC2-6/MHCA2-6

[Features]
· MHC2-6□: Can be equipped with a small auto switch.
· · MHCA2-6□: Short body type with reduced overall length.

(i)Remarque

  • Refer to the catalog for details on product specifications.
  • Product images may be representative. Refer to the manufacturer's catalog for details.

PDF

Référence pièce

Vous pouvez trouver ici le numéro
de référence lié au produit recherché.

MHC2-6 / MHCA2-6 Series Angular Style Air Chuck Specifications

Double acting, outer-diameter grip JIS symbol

Double acting, outer-diameter grip JIS symbol

Single acting, normally open, outer-diameter grip JIS symbol

Single acting, normally open, outer-diameter grip JIS symbol

Applicable fluids Air
Operating pressure Double acting 0.15 to 0.6 MPa
Single acting: normally open 0.3 to 0.6 MPa
Ambient temperature and working fluid temperature -10 to +60°C
Repeat accuracy ±0.02 mm
Maximum operating frequency 180 c.p.m
Lubrication Non-lube
Operating method Double acting, single acting (normally open)
Auto switch (option)* Solid state auto switch (3-wire, 2-wire)

Note) See the manufacturer's catalog for detailed specifications of auto switches.

Model

Operating method Model Cylinder inner diameter
(mm)
Note 1) Gripping moment
(effective value) N・m
Opening/closing angle
(both sides)
Weight (g) Note 2)
Double acting MHC2-6D 6 0.038 +30° to -10 22
MHCA2-6D 6 19
Single acting (normally open) MHC2-6S 6 0.024 +30° to -10 22
MHCA2-6S 6 19

Note 1) Value at a pressure of 0.5 MPa.
Note 2) Values do not include auto switch weight.

Body Option / End Boss Type

Symbol Piping location Type of piping port Compatible model
MHCA2-6 Double acting Single acting
Nil Basic type M3 ×; 0.5
E Side ported M3 ×; 0.5
K Axial ported øWith ø4 (diameter 4 mm) single-action fitting -
H ø4 (diameter 4 mm) hose nipple -
M M3 ×; 0.5 -

Outline dimensional drawing

 

(Unit: mm)

 

MHC2-6□ dimensional drawing / (right) auto switch mounting groove dimensional drawing

MHC2-6□ dimensional drawing / (right) auto switch mounting groove dimensional drawing

*In the case of MHCA2-6S, the finger opening port is a breathing hole.

 

(Unit: mm)

 

MHCA2-6□ (short body) dimensional drawing

MHCA2-6□ (short body) dimensional drawing

*In the case of MHCA2-6S, the finger opening port is a breathing hole.

MHC2-6 structure drawing

Double acting / with fingers open structure drawing

Double acting / with fingers open structure drawing

Double acting / with fingers closed structure drawing

Double acting / with fingers closed structure drawing

Single acting structure drawing

Single acting structure drawing

Component parts

Number Part name Material Note
1 Body Aluminum Alloy Hard anodizing
2 Finger Stainless steel Heat treated
3 Piston Stainless steel -
4 Lever shaft Stainless steel Nitrided
5 Magnet holder Stainless steel -
6 Cap Aluminum Alloy Hard anodizing
7 Clip Stainless steel -
8 Dampers Urethane rubber -
9 Holder Brass Electroless nickel plating
10 Holder lock Stainless steel -
Number Part name Material Note
11 Needle roller High carbon chrome bearing steel -
12 Magnet - Nickel plating
13 N.O. spring Piano wire Zinc chromate
14 Exhaust plug Brass Electroless nickel plating
15 Exhaust filter Resin -
16 Rod Gasket NBR -
17 Piston Gasket NBR -
18 Gasket NBR -
19 Gasket NBR -

MHCA2-6 (short body) structure drawing

Double acting / with fingers open structure drawing

Double acting / with fingers open structure drawing

Double acting / with fingers closed structure drawing

Double acting / with fingers closed structure drawing

Single acting structure drawing

Single acting structure drawing

Component parts

Number Part name Material Note
1 Body Aluminum Alloy Hard anodizing
2 Finger Stainless steel Heat treated
3 Piston Stainless steel -
4 Lever shaft Stainless steel Nitrided
5 Cap Aluminum Alloy Hard anodizing
6 Clip Stainless steel -
7 Dampers Urethane rubber -
8 Holder Brass Electroless nickel plating
9 Holder lock Stainless steel -
Number Part name Material Note
10 Needle roller High carbon chrome bearing steel -
11 N.O. spring Piano wire Zinc chromate
12 Exhaust plug Brass Electroless nickel plating
13 Exhaust filter Resin -
14 Rod Gasket NBR -
15 Piston Gasket NBR -
16 Gasket NBR -
17 Gasket NBR -

Precautions

Mounting

  1. *1Tighten the screw within the specified torque range when mounting the air chuck.
    Tightening with a torque above the limit can cause malfunction, while insufficient tightening can cause slippage and dropping.
  2. *2Do not scratch or dent the air chuck by dropping or bumping it when mounting.
    Even slight deformation can cause the deterioration of accuracy and operation failure.
  3. *3Tighten the screw within the specified torque range when mounting the attachment.
    Tightening with a torque above the limit can cause malfunction, while insufficient tightening can cause slippage and dropping.

Other precautions

  • *Note the risk of corrosion on the finger. Except for certain models, the finger uses martensitic stainless steel, whose corrosion resistance is inferior to austenitic stainless steel. In particular, rust may occur in environments where water droplets adhere to the unit due to condensation.
  • *See the manufacturer's catalog for product information other than the above.
Référence pièce
MHC2-6D
MHCA2-6D
Référence piècePrix unitaire standardRemise sur volumeNombre de jours d'expédition?Commutateur auto

130.74 €

2 jours Sans commutateur auto (aimant intégré)

130.74 €

2 jours Impossible de monter le commutateur auto

Loading...

  1. 1

Informations de base

Type Main Body Mode de préhension Pincement, type parallèle Nombre de doigts 2 pièces
Forme du corps principal Forme carrée Méthode de fonctionnement Double effet Force de préhension (avec 0.5Mpa à la fermeture)(N) 3.4
Environnement, applications Standard Mécanisme de réglage de la course Non fourni Diamètre interne du vérin(mm) 6
Options de corps Type de base Nombre de commutateurs Aucun Longueur du fil de sortie Aucun
Fabrication conforme aux spécifications de la commande Aucun Type de connecteur pour l'ouverture / la fermeture de la pince Aucun

Autres produits de cette catégorie

Les clients qui ont consulté cet article ont également consulté

Assistance technique