MHCM2, Pince pneumatique, modèle à ouverture des pivots, de petite taille

MHCM2, Pince pneumatique, modèle à ouverture des pivots, de petite taille

Détails du produit:

Référence fabricant: MHCM2-7S

Marque: SMC

Prix: 138.29

Délai de livraison: 4 jours


Données techniques:

Fabrication conforme aux spécifications de la commande: Aucun


(i)Remarque

  • Refer to the catalog for details on product specifications.
  • Product images may be representative. Refer to the manufacturer's catalog for details.

Référence pièce

Vous pouvez trouver ici le numéro
de référence lié au produit recherché.

MHCM2-7S

Angular Type Air Chuck, Compact Type, MHCM2-7S Series Specifications

MHCM2-7S Series JIS symbol (single acting normally open, external gripping)

MHCM2-7S Series JIS symbol (single acting normally open, external gripping)

Applicable fluids Air
Operating pressure 0.4 to 0.6 MPa
Ambient temperature and working fluid temperature -10 to +60°C
Repeat accuracy ±0.02 mm
Maximum operating frequency 180 c.p.m.
Lubrication Non-lube
Operating method Single acting (normally open)

Outline dimensional drawing

 

(Unit: mm)

 

MHCM2-7S dimensional drawing

MHCM2-7S dimensional drawing

Structural drawing

Single acting type / open condition structure drawing

Single acting type / open condition structure drawing

Closed condition structure drawing

Closed condition structure drawing

Component parts

Number Part name Material Note
1 Body Aluminum Alloy Hard anodizing
2 Finger Stainless steel Heat treated
3 Piston Stainless steel Heat treated
4 Pusher Stainless steel -
5 Spring Piano wire Zinc chromate
6 Needle roller High carbon chrome bearing steel -
7 Piston Gasket NBR -

Effective Gripping Force

Expressing the effective gripping force

The effective gripping force shown in the graphs below is expressed as F, which is the thrust of one finger when both fingers and attachments are in full contact with the workpiece as shown in the figure below.

Finger thrust: F diagram

Finger thrust: F diagram

L: Gripping point length dimensional drawing (external gripping)

L: Gripping point length dimensional drawing (external gripping)

Effective gripping force graph

Effective gripping force graph

*If there is an overhang, please consult with the manufacturer.

Precautions

Mounting

  1. *1Tighten the screw within the specified torque range when mounting the air chuck.
    Tightening with a torque above the limit can cause malfunction, while insufficient tightening can cause slippage and dropping.
  2. *2Do not scratch or dent the air chuck by dropping or bumping it when mounting.
    Even slight deformation can cause the deterioration of accuracy and operation failure.
  3. *3Tighten the screw within the specified torque range when mounting the attachment.
    Tightening with a torque above the limit can cause malfunction, while insufficient tightening can cause slippage and dropping.

Other precautions

  • *Note the risk of corrosion on the finger. Except for certain models, the finger uses martensitic stainless steel, whose corrosion resistance is inferior to austenitic stainless steel. In particular, rust may occur in environments where water droplets adhere to the unit due to condensation.
  • *See the manufacturer's catalog for product information other than the above.
Référence pièce
MHCM2-7S
Référence pièce
Prix unitaire standard
Quantité minimale de commandeRemise sur volume
Jour
d'expédition standard
?
Fabrication conforme aux spécifications de la commande

138.29 €

1 4 jours Aucun

Loading...

  1. 1

Informations de base

Type Corps principal Mode de préhension Pincement, type à oscillation Nombre de doigts 2 pièces
Forme du corps principal Forme carrée Méthode de fonctionnement Type à simple effet (normalement ouvert) Force de préhension (avec 0.5Mpa à la fermeture)(N) 1.2
Environnement, applications Standard Fonction supplémentaire Non fourni Mécanisme de réglage de la course Non fourni
Diamètre interne du vérin(mm) 7

Vous vous trouvez sur la page de MHCM2, Pince pneumatique, modèle à ouverture des pivots, de petite taille, le numéro d'article est le suivant: MHCM2-7S.
Veuillez trouver plus de détails concernant les particularités et les dimensions sous le numéro d'article MHCM2-7S.

Variantes de ce produit

Référence pièce
MHCM2-7S-X4
Référence piècePrix unitaire standardQuantité minimale de commandeRemise sur volumeJour
d'expédition standard
?
Fabrication conforme aux spécifications de la commande

161.05 €

1 26 jours Thermorésistant (100°C)

Assistance technique