M(D)SUB*1~20, Table rotative, modèle de base (MDSUB1-90D-97L)
Détails du produit:
Référence fabricant: MDSUB1-90D-97L
Marque: SMC
Prix: 563.92 €
Délai de livraison: 26 jours
Données techniques:
Angle d'oscillation A: [90°] 90°
Couple: 1 à moins de 3 N▪m
Couple: 1 N▪m
Méthode de fonctionnement: Double palette
Diam. de tube nominal: 9
(i)Remarque
- Refer to the catalog for details on product specifications.
- Product images may be representative. Refer to the manufacturer's catalog for details.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
MDSUB1-90D-97L
Basic Rotary Table, Vane Type, MSUB Series Specifications
MSUB Series JIS symbol
| Model | MSUB1 | MSUB3 | |||||
|---|---|---|---|---|---|---|---|
| Vane type | Single vane | Double vane | Single vane | Double vane | |||
| Rotating angle*1 | 90° ±10 ° | 180° ±10 ° | 90° ±5 ° | 90° ±10 ° | 180° ±10 ° | 90° ±5 ° | |
| Fluid | Air (non-lube) | ||||||
| Proof pressure (MPa) | 1.05 | ||||||
| Ambient and fluid temperature | 5 to 60°C | ||||||
| Operating pressure range (MPa) | 0.2 to 0.7 | 0.15 to 0.7 | |||||
| Rotation time adjustment range (s/90) ° | 0.07 to 0.3 (0.5 MPa) | ||||||
| Shaft load | Allowable radial load | 20 N | 40 N | ||||
| Allowable thrust load*2 | 15 N | 30 N | |||||
| 10 N | 15 N | ||||||
| Allowable moment | 0.3 N·m | 0.7 N·m | |||||
| Shaft | Bearing | ||||||
| Port location | Side ported or axial ported | ||||||
| Port size | Side ported | M3 ×; 0.5 | M5 ×; 0.8 | ||||
| Axial ported | M3 ×; 0.5 | ||||||
| Model | MSUB7 | MSUB20 | |||||
|---|---|---|---|---|---|---|---|
| Vane type | Single vane | Double vane | Single vane | Double vane | |||
| Rotating angle*1 | 90° ±10 ° | 180° ±10 ° | 90° ±5 ° | 90° ±10 ° | 180° ±10 ° | 90° ±5 ° | |
| Fluid | Air (non-lube) | ||||||
| Proof pressure (MPa) | 1.05 | 1.5 | |||||
| Ambient and fluid temperature | 5 to 60°C | ||||||
| Operating pressure range (MPa) | 0.15 to 0.7 | 0.15 to 1.0 | |||||
| Rotation time adjustment range (s/90) ° | 0.07 to 0.3 (0.5 MPa) | ||||||
| Shaft load | Allowable radial load | 50 N | 60 N | ||||
| Allowable thrust load*2 | 60 N | 80 N | |||||
| 30 N | 40 N | ||||||
| Allowable moment | 0.9 N·m | 2.9 N·m | |||||
| Shaft | Bearing | ||||||
| Port location | Side ported or axial ported | ||||||
| Port size | Side ported | M5 ×; 0.8 | |||||
| Axial ported | M5 ×; 0.8 | ||||||
- *1 Single vane 90° can be adjusted to 90° ±10° (both ends of rotation ±5° each)
Single vane 180° can be adjusted to 180° ±10° (both ends of rotation ±5° each)
Double vane 90° can be adjusted to 90° ±5° (both ends of rotation ±2.5° each)
*Rotation angles other than 90° and 180° (single vane) are available by special order. - *2 The allowable thrust load is directional. Refer to the allowable load in the manufacturer's catalog for details.
Weight
(Unit: g)
| Size | Rotating angle | Basic weight | Auto switch unitNote ) | ||
|---|---|---|---|---|---|
| Single vane | Double vane | ||||
| 1 | 90 | 145 | 150 | 15 | |
| 180 | 140 | - | |||
| 3 | 90 | 230 | 240 | 20 | |
| 180 | 225 | - | |||
| 7 | 90 | 360 | 375 | 28 | |
| 180 | 355 | - | |||
| 20 | 90 | 510 | 580 | 38 | |
| 180 | 505 | - | |||
*Values above do not include auto switch weight.
Structure drawing
Rotary Table Internal Structure Drawing
MSUB Series Rotary Table internal structure drawing 1
For 180° (figure in the middle position) structure drawing
For 90° (figure with pressure to A port) structure drawing
Single vane (for 180° figure in the middle position) structure drawing
Double vane (figure with pressure to A port) structure drawing
Single vane; size 1, 3, 7, 20 structure drawing
Double vane; size 1 structure drawing
Double vane; size 3, 7, 20 structure drawing
| No. | Description | Material | Note |
|---|---|---|---|
| 1 | Body (A) | Aluminum alloy | Anodized |
| 2 | Body (B) | Aluminum alloy | Anodized |
| 3 | Vane shaft | Stainless steel (MSUB20 is carbon steel) | Single vane |
| Carbon steel | Double vane | ||
| 4 | Stopper | Resin | Single vane |
| 5 | Stopper | Stainless steel | Double vane |
| 6 | Stopper seal | NBR | - |
| 7 | Table | Aluminum alloy | Anodized, serigraph |
| 8 | Stopper lever (D) | Carbon steel | Heat treated, electroless nickel plated |
| 9 | Stopper lever (S) | Carbon steel | Heat treated, electroless nickel plated |
| 10 | Lever retainer | Carbon steel | Zinc chromated |
| 11 | Ring collar | Carbon steel | Zinc chromated |
| 12 | Bearing | High carbon chrome bearing steel | - |
| 13 | Bearing | High carbon chrome bearing steel | - |
| 14 | Back-up ring | Stainless steel | - |
| 15 | Scraper | NBR | - |
| 16 | O-ring | NBR | - |
| 17 | With adjustment bolt | Carbon steel | Heat treated |
| 18 | Hex nut | Carbon steel | - |
| 19 | Hex socket head cap screw | - | - |
| 20 | Hex socket head cap screw | - | - |
| 21 | Hex socket head cap screw | - | - |
| 22 | Button bolt | - | - |
| 23 | Rubber cap | NBR | - |
| 24 | Hex socket head set screw | - | SE type only |
| 25 | Cover | Aluminum alloy | - |
| 26 | Plate | Resin | - |
| 27 | Gasket | NBR | - |
| 28 | O-ring | NBR | - |
| 29 | O-ring | NBR | - |
| 30 | Label | - | - |
- *The plug (24) is used only when the connection port is type SE.
- *Individual part cannot be shipped.
External dimensional drawing
*These drawings indicate the state of the product when the B port is pressurized.
MSUB1 (single vane)
(Unit: mm)
MSUB1-□S, SE dimensional drawing
(Unit: mm)
Axial ported / MSUB1-□SE dimensional drawing
*If the adjustment bolt is removed, rotation will be approximately 270° for the single vane type and 100° for the double vane type. Since this will make it impossible to satisfy the specifications, operate with adjustment within the range of maximum values.
Precautions
- *Be sure to read the precautions in the catalog before use.
- *See the manufacturer's catalog for information other than the above.
Référence pièce
|
|---|
| MDSUB1-90D-97L |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Angle d'oscillation A | Couple (N▪m) | Couple (N▪m) | Méthode de fonctionnement | Diam. de tube nominal | Énergie cinétique admissible (J) | Énergie cinétique admissible (J) | Plage de pression de fonctionnement (MPa) | Taille | Emplacement de port de connexion | Interrupteur | Fil de sortie (m) | Nombre de commutateurs | Entrée électrique du fil de sortie | Type de connecteur | Spécifications | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
563.92 € | 1 | 26 jours | [90°] 90° | 1 à moins de 3 | 1 | Double palette | 9 | 0.005 à moins de 0.01 | 0.005 | 0.2～ 0.7 | 1 | Surface latérale de corps | 97 | 3 | 2 pcs. | Passe-fils | Aucun | With auto switch unit |
Loading...
Informations de base
| Type | Sortie d'axe de l'actionneur rotatif sur un côté | Forme du corps principal | Rond | Environnement de fonctionnement, applications | Standard |
|---|---|---|---|---|---|
| Rigidité et précision | Standard | Vanne | N/A |
Configurer
Propriétés de base
-
Type
- MDSUB1-□
- MDSUB20-□
- MDSUB3-□
- MDSUB7-□
- MSUB1-□
- MSUB20-□
- MSUB3-□
- MSUB7-□
-
Angle d'oscillation A
- 90°
- 180°
- 90°
-
Couple(N▪m)
- Moins de 1
- 1 à moins de 3
- 3 à moins de 6
- 6 à moins de 10
- 20 à moins de 50
-
Couple(N▪m)
-
Méthode de fonctionnement
- Palette simple
- Double palette
-
Diam. de tube nominal
-
Énergie cinétique admissible(J)
- 0.005 à moins de 0.01
- 0.01 à moins de 0.1
-
Énergie cinétique admissible(J)
-
Taille
-
Emplacement de port de connexion
- Orifice axial
- Surface latérale de corps
-
Interrupteur
- S7P
- S9P
- S9PV
- R73
- R73C
- S79
- T79
- T79C
- R80
- R80C
- 90
- 90A
- 93A
- 97
- T99
- T99V
- Aucun
-
Fil de sortie(m)
- 0.5
- 3
- 5
- Aucun
-
Nombre de commutateurs
- 1 pc.
- 2 pcs.
- Aucun
-
Entrée électrique du fil de sortie
- Aucun
- Connecteur
- Passe-fils
-
Type de connecteur
- M8 à 3 broches
- Aucun
-
Spécifications
- Type standard
- With auto switch unit
-
Filtrer par type de données CAO
- 2D
- 3D
Filtrer par jours d'expédition standard
-
- Tous les articles
- 4 jours ou moins
- 26 jours ou moins
- 98 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.