- Accessoires/options : à commander séparément
- Spécification E/S
- Options de connecteur
- Type
- CAO
- 2D
- 3D
- Jours d'expédition estimés
- Tout
- Dans les 26 jours ouvrables
IZE11, Moniteur du Capteur électrostatique (IZE111-LBC)
Informations sur le produit
Electrostatic Sensor Monitor, IZE11 Series Specifications
IZE11 Series external appearance
Connection by connector
Sensors can be mounted so that they are in contact vertically and horizontally, reducing time and labor required for panel cutting
Product dimension: □30 mm
2-color red and green display can be set to 4 display color patterns
| Pattern | ON | OFF |
|---|---|---|
| (1) | Red | Green |
| (2) | Green | Red |
| (3) | Red | Red |
| (4) | Green | Green |
| Model | IZE11□ | |||
|---|---|---|---|---|
| Connection Sensor | IZD10-110 | IZD10-510 | ||
| Rated Measurement Range | -0.4 kV to +0.4 kV*1 | -20kV to +20kV*2 | ||
| Minimum Unit Setting | 0.001 kV | 0.1 kV | ||
| Measurement Distance Setting | 10 to 50 mm | 25 to 75 mm | ||
| Power Supply Voltage | 21.6 to 26.4 V DC (24 V DC ±10% or less, with power supply polarity protection) | |||
| Current Consumption | 50 mA or less (excluding sensor unit current consumption) | |||
| Sensor Input | 1 to 5 V DC (Input impedance: 1 MΩ) | |||
| - | Number of Inputs | 1 input | ||
| Input Protection | With excess voltage protection (up to 26.4 V) | |||
| Hysteresis | Hysteresis mode: Variable Window comparator mode: Variable | |||
| Switch output | NPN or PNP open collector: 2 outputs | |||
| - | Max. Load Current | 80 mA | ||
| Max. Applied Voltage | 30 V DC (with NPN output) | |||
| Residual Voltage | 1 V or less (with load current of 80 mA) | |||
| Short Circuit Protection | With short circuit protection | |||
| Response Time (Including Sensor Response Time) | 100 ms or less Response time with anti-chattering function: 500 ms, 1 s, 2 s or less | |||
| Analog Output | Voltage Output | Output voltage: 1 to 5 V (in accordance with rated measurement range), Output impedance: Approx. 1 k Ω | ||
| - | Accuracy (for Readings) (25°C) | ±1% F.S. | ||
| Current Output | Output current: 4 to 20 mA (in accordance with rated measurement range) Max. load impedance: 600 Ω (at 24 V DC, Min. load impedance: 50 Ω | |||
| - | Accuracy (for Readings) (25°C) | ±1% F.S. | ||
| Response Time (Including Sensor Response Time) | 200 ms (without filter), 1.5 s (with filter) or less | |||
| Display Accuracy | ±0.5% F.S. ±1 digit | |||
| Display Method | 3 + 1/2 digit, 7-segment indicator, 2-color display (Red/Green) Sampling cycle: 5 times/s | |||
| Operation Indicator Light | OUT1: Illuminates when output is turned ON (Green), OUT2: Illuminates when output is turned ON (Red) | |||
| Environmental Resistance | Enclosure | IP40 | ||
| Operating Temperature Range | Operating: 0 to 50°C, Stored: -10 to +60°C (with no freezing or condensation) | |||
| Operating Humidity Range | Operating/stored: 35 to 85% R.H. (with no condensation) | |||
| Withstand Voltage | 1,000 V AC for 1 min, between live parts and housing | |||
| Insulation Resistance | 50 MΩor more (with 500 V DC measured via megohmmeter), between live parts and housing | |||
| Vibration Resistance | 10 to 150 Hz at amplitudes and accelerations smaller than 1.5 mm and 98 m/s2 respectively, in X, Y and Z directions (de-energized) | |||
| Impact Resistance | 100 m/s2 in X, Y, Z directions 3 times each (de-energised) | |||
| Temperature Characteristics | ±0.5% F.S. (based on 25°C) | |||
| Connection Method | Power supply, Output connection: 5-pin connector, Sensor connection: 4-pin connector | |||
| Material | Front case: PBT, Rear case: PBT | |||
| Weight | Excluding Power Supply and Output Connection Cable | 30 g | ||
| Standards | CE marking, UL (CSA) compliant | |||
*1: Rated value when the distance between the charged object and the sensor is 25 mm
*2: Rated value when the distance between the charged object and the sensor is 50 mm
Function Names and Descriptions
IZE11 Series part names
Dimensional Outline Drawing
(Unit: mm)
IZE11 Series dimensional drawing
(Unit: mm)
Power supply / output connection cable dimensional drawing
Structural diagram of connector for sensor connection
Connector for sensor connection terminal names
- PIN No. 1: DC (+)
- PIN No. 2: N.C.
- PIN No. 3: DC (-)
- PIN No. 4: IN (1 to 5 V)
(Unit: mm)
Dimensional drawing with bracket
(Unit: mm)
Dimensional drawing with panel mount adapter
Specific Product Precautions
- *Ensure that you read the "Safety Precautions" and "Common/Specific Product Precautions" prior to use.
- *Product images are representative images. These images may differ from the actual products.
- *Refer to the catalog for further information.
Plus d'informations
Informations de base
RoHS-compliant electrostatic sensor monitor that can be vertically or horizontally mounted.
[Features]
· Minimum unit setting: 0.001 kV (at ±0.4 kV), 0.1 kV at ±20 kV).
· Display accuracy: ±0.5% F.S. ±1 digit or less.
· Detection distance correction function (adjustable in 1 mm increments).
· Supports two types of sensors (±0.4 kV, ±20 kV) using range selection.
· 2-color (Red/Green) display.
· Connection by connector.
· Peak/Bottom value display.
· Key lock function.
Attention
- Please refer to the manufacturer's catalog for specification details.
- Product images may be representative images. Refer to the manufacturer's catalog for shape details.