Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
• Extension force: 10 N to 100 N (compressed up to 133 N) • Progression: Approx. 29 % to 33 % • Operating temperature range: -20 °C to +80 °C • Material: Outer body: coated steel; Piston rod: stainless steel (1.4301/1.4305, AISI 304/303); End fittings: zinc plated steel • Mounting: We recommend mounting with piston rod downwards to take advantage of the built-in end position damping. • End position damping length: approx. 5 mm (depending on the stroke) • Positive stop: External positive stop at the end of stroke provided by the customer. • Note: Increased break-away force if unit has not moved for some time. • End fittings: They are interchangeable and if necessary must be positively secured by the customer to prevent unscrewing. • Safety instructions: Gas springs (push type) should not be installed under pre-tension. |
• Extension force: 10 N to 100 N (compressed up to 116 N) • Progression: Approx. 13 % to 16 % • Operating temperature range: -20 °C to +80 °C • Material: Outer body: coated steel; Piston rod: stainless steel (1.4301/1.4305, AISI 304/303); End fittings: zinc plated steel • Mounting: We recommend mounting with piston rod downwards to take advantage of the built-in end position damping. • End position damping length: approx. 5 mm (depending on the stroke) • Positive stop: External positive stop at the end of stroke provided by the customer. • Note: Increased break-away force if unit has not moved for some time. • End fittings: They are interchangeable and if necessary must be positively secured by the customer to prevent unscrewing. • Safety instructions: Gas springs (push type) should not be installed under pre-tension. |
• Extension force: 15 N to 180 N (compressed up to 243 N) • Progression: Approx. 20 % to 35 % • Operating temperature range: -20 °C to +80 °C • Material: Outer body: coated steel; Piston rod: stainless steel (1.4301/1.4305, AISI 304/303); End fittings: zinc plated steel • Mounting: We recommend mounting with piston rod downwards to take advantage of the built-in end position damping. • End position damping length: approx. 10 mm (depending on the stroke) • Positive stop: External positive stop at the end of stroke provided by the customer. • Note: Increased break-away force if unit has not moved for some time. • End fittings: They are interchangeable and if necessary must be positively secured by the customer to prevent unscrewing. • Safety instructions: Gas springs (push type) should not be installed under pre-tension. |
• Extension force: 40 N to 400 N (compressed up to 560 N) • Progression: Approx. 30 % to 40 % • Operating temperature range: -20 °C to +80 °C • Material: Outer body: steel coated with UV paint; Piston rod: steel with wear-resistant coating; End fittings: zinc plated steel • Mounting: We recommend mounting with piston rod downwards to take advantage of the built-in end position damping. • End position damping length: approx. 10 mm (depending on the stroke) • Positive stop: External positive stop at the end of stroke provided by the customer. • Note: Increased break-away force if unit has not moved for some time. • End fittings: They are interchangeable and if necessary must be positively secured by the customer to prevent unscrewing. • Safety instructions: Gas springs (push type) should not be installed under pre-tension. |
• Extension force: 50 N to 700 N (compressed up to 945 N) • Progression: Approx. 24 % to 35 % • Operating temperature range: -20 °C to +80 °C • Material: Outer body: steel coated with UV paint; Piston rod: steel with wear-resistant coating; End fittings: zinc plated steel • Mounting: In any position. Hint: We recommend mounting with piston rod downwards to take advantage of the built-in end position damping. • End position damping length: approx. 20 mm to 60 mm (depending on the stroke) • Positive stop: External positive stop at the end of stroke provided by the customer. • Note: Integrated grease chamber reduces friction and wear and optimises lubrication. • End fittings: They are interchangeable and if necessary must be positively secured by the customer to prevent unscrewing. • Safety instructions: Gas springs (push type) should not be installed under pre-tension. |
• Extension force: 80 N to 1,300 N (compressed up to 1,820 N) • Progression: Approx. 30 % to 40 % • Operating temperature range: -20 °C to +80 °C • Material: Outer body: steel coated with UV paint; Piston rod: steel with wear-resistant coating; End fittings: zinc plated steel • Mounting: In any position. Hint: We recommend mounting with piston rod downwards to take advantage of the built-in end position damping. • End position damping length: approx. 20 mm to 70 mm (depending on the stroke) • Positive stop: External positive stop at the end of stroke provided by the customer. • Note: Integrated grease chamber reduces friction and wear and optimises lubrication. • End fittings: They are interchangeable and if necessary must be positively secured by the customer to prevent unscrewing. • Safety instructions: Gas springs (push type) should not be installed under pre-tension. |
• Extension force: 150 N to 2,500 N (compressed up to 4,400 N) • Progression: Approx. 63 % to 76 % • Operating temperature range: -20 °C to +80 °C • Material: Outer body: steel coated with UV paint; Piston rod: steel with wear-resistant coating; End fittings: zinc plated steel • Mounting: In any position. Hint: We recommend mounting with piston rod downwards to take advantage of the built-in end position damping. • End position damping length: approx. 30 mm to 70 mm (depending on the stroke) • Positive stop: External positive stop at the end of stroke provided by the customer. • Note: Integrated grease chamber reduces friction and wear and optimises lubrication. • End fittings: They are interchangeable and if necessary must be positively secured by the customer to prevent unscrewing. • Safety instructions: Gas springs (push type) should not be installed under pre-tension. |
• Extension force: 500 N to 5,000 N (compressed up to 7,500 N) • Progression: Approx. 38 % to 50 % • Operating temperature range: -20 °C to +80 °C • Material: Outer body: steel coated with UV paint; Piston rod: steel with wear-resistant coating; End fittings: zinc plated steel Mounting: In any position. Hint: We recommend mounting with piston rod downwards to take advantage of the built-in end position damping. • End position damping length: approx. 30 mm to 70 mm (depending on the stroke) • Positive stop: External positive stop at the end of stroke provided by the customer. • Note: Integrated grease chamber reduces friction and wear and optimises lubrication. • End fittings: They are interchangeable and if necessary must be positively secured by the customer to prevent unscrewing. • Safety instructions: Gas springs (push type) should not be installed under pre-tension. |
• Extension force: 2,000 N to 13,000 N (compressed up to 16,250 N) • Progression: Approx. 25 % • Operating temperature range: -20 °C to +80 °C • Material: Outer body: coated steel; Piston rod: hard chrome plated steel; End fittings: zinc plated steel • Mounting: In any position. Hint: We recommend mounting with piston rod downwards to take advantage of the built-in end position damping. • End position damping length: approx. 10 mm to 20 mm (depending on the stroke) • Positive stop: External positive stop at the end of stroke provided by the customer. • Note: Increased break-away force if unit has not moved for some time. • End fittings: They are interchangeable and if necessary must be positively secured by the customer to prevent unscrewing. • Safety instructions: Gas springs (push type) should not be installed under pre-tension. |
• Extension force: 10 N to 100 N (compressed up to 131 N) • Progression: Approx. 28 % to 31 % • Operating temperature range: -20 °C to +80 °C • Material: Outer body, Piston rod, End fittings: stainless steel (1.4404/1.4571, AISI 316L/316Ti) • Mounting: We recommend mounting with piston rod downwards to take advantage of the built-in end position damping. • End position damping length: approx. 5 mm (depending on the stroke) • Positive stop: External positive stop at the end of stroke provided by the customer. • Note: Special oil according to FDA 21 CFR 178.3570 of the food industry • End fittings: They are interchangeable and if necessary must be positively secured by the customer to prevent unscrewing. • Safety instructions: Gas pressure springs should not be installed under pre-tension. |
• Extension force: 10 N to 100 N (compressed up to 116 N) • Progression: Approx. 13 % to 16 % • Operating temperature range: -20 °C to +80 °C • Material: Outer body, Piston rod, End fittings: stainless steel (1.4404/1.4571, AISI 316L/316Ti) • Mounting: We recommend mounting with piston rod downwards to take advantage of the built-in end position damping. • End position damping length: approx. 5 mm (depending on the stroke) • Positive stop: External positive stop at the end of stroke provided by the customer. • Note: Special oil according to FDA 21 CFR 178.3570 of the food industry • End fittings: They are interchangeable and if necessary must be positively secured by the customer to prevent unscrewing. • Safety instructions: Gas pressure springs should not be installed under pre-tension. |
• Extension force: 15 N to 180 N (compressed up to 225 N) • Progression: Approx. 20 % to 25 % • Operating temperature range: -20 °C to +80 °C • Material: Outer body, Piston rod, End fittings: stainless steel (1.4404/1.4571, AISI 316L/316Ti) • Mounting: We recommend mounting with piston rod downwards to take advantage of the built-in end position damping. • End position damping length: approx. 10 mm (depending on the stroke) • Positive stop: External positive stop at the end of stroke provided by the customer. • Note: Special oil according to FDA 21 CFR 178.3570 of the food industry • End fittings: They are interchangeable and if necessary must be positively secured by the customer to prevent unscrewing. • Safety instructions: Gas pressure springs should not be installed under pre-tension. |
• Extension force: 40 N to 400 N (compressed up to 612 N) • Progression: Approx. 30 % to 53 % • Operating temperature range: -20 °C to +80 °C • Material: Outer body, Piston rod, End fittings: stainless steel (1.4301/1.4305, AISI 304/303) • Mounting: We recommend mounting with piston rod downwards to take advantage of the built-in end position damping. • End position damping length: approx. 20 mm (depending on the stroke) • Positive stop: External positive stop at the end of stroke provided by the customer. • Note: Special oil according to FDA 21 CFR 178.3570 of the food industry • End fittings: They are interchangeable and if necessary must be positively secured by the customer to prevent unscrewing. • Safety instructions: Gas pressure springs should not be installed under pre-tension. |
• Extension force: 50 N to 700 N (compressed up to 924 N) • Progression: Approx. 28 % to 32 % • Operating temperature range: -20 °C to +80 °C • Material: Outer body, Piston rod, End fittings: stainless steel (1.4301/1.4305, AISI 304/303) • Mounting: We recommend mounting with piston rod downwards to take advantage of the built-in end position damping. • End position damping length: approx. 20 mm (depending on the stroke) • Positive stop: External positive stop at the end of stroke provided by the customer. • Note: Special oil according to FDA 21 CFR 178.3570 of the food industry • End fittings: They are interchangeable and if necessary must be positively secured by the customer to prevent unscrewing. • Safety instructions: Gas pressure springs should not be installed under pre-tension. |
• Extension force: 100 N to 1,200 N (compressed up to 1,596 N) • Progression: Approx. 29 % to 33 % • Operating temperature range: -20 °C to +80 °C • Material: Outer body, Piston rod, End fittings: stainless steel (1.4301/1.4305, AISI 304/303) • Mounting: We recommend mounting with piston rod downwards to take advantage of the built-in end position damping. • End position damping length: approx. 20 mm (depending on the stroke) • Positive stop: External positive stop at the end of stroke provided by the customer. • Note: Special oil according to FDA 21 CFR 178.3570 of the food industry • End fittings: They are interchangeable and if necessary must be positively secured by the customer to prevent unscrewing. • Safety instructions: Gas pressure springs should not be installed under pre-tension. |
• Extension force: 150 N to 2,500 N (compressed up to 3,975 N) • Progression: Approx. 53 % to 59 % • Operating temperature range: -20 °C to +80 °C • Material: Outer body, Piston rod, End fittings: stainless steel (1.4301/1.4305, AISI 304/303) • Mounting: We recommend mounting with piston rod downwards to take advantage of the built-in end position damping. • End position damping length: approx. 20 mm (depending on the stroke) • Positive stop: External positive stop at the end of stroke provided by the customer. • Note: Special oil according to FDA 21 CFR 178.3570 of the food industry • End fittings: They are interchangeable and if necessary must be positively secured by the customer to prevent unscrewing. • Safety instructions: Gas pressure springs should not be installed under pre-tension. |
Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Course S (mm) | Longueur max. Lmax (mm) | Force d'extension en position déployée, minimale (N) | Force d'extension en position déployée, maximale (N) | |
---|---|---|---|---|---|---|---|---|
- | 1 | 5 jours | 20 | 72 | 10 | 100 | ||
- | 1 | 10 jours | 20 | 72 | 10 | 100 | ||
- | 1 | 5 jours | 30 | 92 | 10 | 100 | ||
- | 1 | 10 jours | 30 | 92 | 10 | 100 | ||
- | 1 | 5 jours | 40 | 112 | 10 | 100 | ||
- | 1 | 10 jours | 40 | 112 | 10 | 100 | ||
- | 1 | 5 jours | 50 | 132 | 10 | 100 | ||
- | 1 | 10 jours | 50 | 132 | 10 | 100 | ||
- | 1 | 5 jours | 60 | 152 | 10 | 100 | ||
- | 1 | 10 jours | 60 | 152 | 10 | 100 | ||
- | 1 | 5 jours | 80 | 192 | 10 | 100 | ||
- | 1 | 10 jours | 80 | 192 | 10 | 100 | ||
- | 1 | 5 jours | 20 | 72 | 10 | 100 | ||
- | 1 | 5 jours | 20 | 72 | 10 | 100 | ||
- | 1 | 5 jours | 30 | 92 | 10 | 100 | ||
- | 1 | 5 jours | 30 | 92 | 10 | 100 | ||
- | 1 | 5 jours | 40 | 112 | 10 | 100 | ||
- | 1 | 5 jours | 40 | 112 | 10 | 100 | ||
- | 1 | 5 jours | 50 | 132 | 10 | 100 | ||
- | 1 | 5 jours | 50 | 132 | 10 | 100 | ||
- | 1 | 5 jours | 60 | 152 | 10 | 100 | ||
- | 1 | 5 jours | 60 | 152 | 10 | 100 | ||
- | 1 | 5 jours | 80 | 192 | 10 | 100 | ||
- | 1 | 5 jours | 80 | 192 | 10 | 100 | ||
- | 1 | 5 jours | 20 | 72 | 15 | 180 | ||
- | 1 | 5 jours | 20 | 72 | 15 | 180 | ||
- | 1 | 5 jours | 30 | 92 | 15 | 180 | ||
- | 1 | 5 jours | 30 | 92 | 15 | 180 | ||
- | 1 | 5 jours | 40 | 112 | 15 | 180 | ||
- | 1 | 5 jours | 40 | 112 | 15 | 180 | ||
- | 1 | 5 jours | 50 | 132 | 15 | 180 | ||
- | 1 | 5 jours | 50 | 132 | 15 | 180 | ||
- | 1 | 5 jours | 60 | 152 | 15 | 180 | ||
- | 1 | 5 jours | 60 | 152 | 15 | 180 | ||
- | 1 | 5 jours | 80 | 192 | 15 | 150 | ||
- | 1 | 5 jours | 80 | 192 | 15 | 180 | ||
- | 1 | 5 jours | 100 | 232 | 15 | 150 | ||
- | 1 | 5 jours | 100 | 232 | 15 | 150 | ||
- | 1 | 5 jours | 120 | 272 | 15 | 120 | ||
- | 1 | 5 jours | 120 | 272 | 15 | 120 | ||
- | 1 | 5 jours | 150 | 332 | 15 | 100 | ||
- | 1 | 5 jours | 150 | 332 | 15 | 100 | ||
- | 1 | 5 jours | 20 | 67 | 40 | 400 | ||
- | 1 | 5 jours | 20 | 20 | 40 | 400 | ||
- | 1 | 5 jours | 40 | 107 | 40 | 400 | ||
- | 1 | 5 jours | 40 | 40 | 40 | 400 | ||
- | 1 | 5 jours | 50 | 127 | 40 | 400 | ||
- | 1 | 5 jours | 50 | 50 | 40 | 400 | ||
- | 1 | 5 jours | 60 | 147 | 40 | 400 | ||
- | 1 | 5 jours | 60 | 60 | 40 | 400 | ||
- | 1 | 5 jours | 80 | 187 | 40 | 400 | ||
- | 1 | 5 jours | 80 | 80 | 40 | 400 | ||
- | 1 | 5 jours | 100 | 227 | 40 | 400 | ||
- | 1 | 5 jours | 100 | 100 | 40 | 400 | ||
- | 1 | 5 jours | 120 | 267 | 40 | 400 | ||
- | 1 | 5 jours | 120 | 120 | 40 | 400 | ||
- | 1 | 5 jours | 150 | 327 | 40 | 400 | ||
- | 1 | 5 jours | 150 | 150 | 40 | 400 | ||
- | 1 | 5 jours | 200 | 427 | 40 | 350 | ||
- | 1 | 5 jours | 50 | 164 | 50 | 700 |
Loading...
Configurer
Propriétés de base
Course S(mm)
Longueur max. Lmax(mm)
Force d'extension en position déployée, minimale(N)
Force d'extension en position déployée, maximale(N)
Filtrer par type de données CAO
Filtrer par jours d'expédition standard
Propriétés optionnelles