Busbar

[Features]
· A clamp is provided for fixing busbars, grounding bars, and wires for the purposes of integrating neutral wires or grounding wire (= PE) in switch gears or control circuits.
· In addition, using this product makes the processing of shield wiring as an EMC measure easy.
· Ideal for connecting any number of neutral wires or grounding wires in restricted spaces.
· For the SSch, wiring is connected with the ZB.
· The ZB can move left and right along bars, allowing wires to be connected in any position.
· The NSch and ESch have square holes and tap holes at regularly spaced intervals on bars. Wires can be clamped down onto the bar from above using the DS.
· When doing so, inserting the protruding part of the DS into the square hole increases the support strength for the wires.
· Although it depends on the size of the wire, up to 70 wires can be connected per 1 m.

Spécifications de 0348900000

• Modèle

  SSCH 10X3X1000 CU/SN

• Type

  Jeu de barres

• Largeur x hauteur(mm)

  10 x 3

• Longueur(mm)

  1000

• Matériau

  Placage cuivre/étain

Vous vous trouvez sur la page de Barre omnibus série SSCH, le numéro d'article est le suivant: 0348900000.
Veuillez trouver plus de détails concernant les particularités et les dimensions sous le numéro d'article 0348900000.