- Applicable pin/contact
- Number Of Cores
- 20
- Application
- Allowable Current(A)
- 5
- Type de forme de connecteur
- Caractéristiques de forme du connecteur
- Taille d'enveloppe
- 40
- Âme normale / âme inversée
- Diamètre extérieur de câble utilisé(φ)
- Section transversale de conducteur de fil conforme(mm2)
- 1.25
- Bride
- Traitement du contact par placage
- CAO
- 2D
- Jours d'expédition estimés
- Tout
- Dans les 6 jours ouvrables
Série WT (WT-4020-R)
Plus d'informations
Informations de base
The WT series has a shaft seal structure when connected. Waterproof function equivalent to IP-X7.
[Features]
・An O-ring seal is used on the panel mounting part of the receptacle.
・Based on the NWPC series, a coupling nut (NWPC) is used to improve operability.
· Cable assembly also accepted.
· We are highly rated by many customers for our reliability, ability to meet deadlines, and high on-time delivery record.
▪ (Insulation resistance) 2, 000 MΩ or more when measured at a specified voltage between conductors which are closest to each other.
・(Withstand voltage) No short circuit or abnormality when the specified voltage is applied for 1 minute between the closest conductors.
・(Contact resistance) Conductor resistance is 3mΩ or less when a pair of contacts are joined to the normal length.
・(Waterproof) No sign of water ingress when left under a water pressure of 100kPa for 2 hours in the normal operating state.