Poignée de cliquet (clé carrée 9,5 mm) Système Sodor
[Features]
· The structure is such that the claw is supported by the ratchet handle, making switching between left and right easy and reliable.
· The claw tip has two steps and supports gears with the two surfaces. Due to this structure, torque is increased by approximately 30% compared to the conventional single type (manufacturer's comparison).
· The structure is such that the claw is supported by the ratchet handle, making switching between left and right easy and reliable.
· The claw tip has two steps and supports gears with the two surfaces. Due to this structure, torque is increased by approximately 30% compared to the conventional single type (manufacturer's comparison).
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
3753N
Informations de base
| Single Product/Set Classification | Poignée pour simple article | Application | Pour le travail à la main | Insertion Angle (Shaft measurement when electric drill) (mm) | 9.5 |
|---|---|---|---|---|---|
| Overall length (L dimension)(mm) | 200 | Nombre de dents(feuille) | 24 | Code Trusco | 330-2202 |
| Caractéristiques | The structure is such that the claw is supported by the ratchet handle, making switching between left and right reliable. | Masse(g) | 320 |
Configurer
Propriétés de base
-
Type
- 3753N
Filtrer par jours d'expédition standard
-
- Tous les articles
- 6 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.