Cône de type HA-M-OHC série SA (Numéros de référence)
[Features]
· HA-M type that supports center through coolant
· Characteristics and specifications conform to the HA-M type
· The flange through oil hole type (-OHF) is available upon order
· Unlike the spring collet, tap attachment and detachment can be performed in a single action
· Remeasurement of tool length after tap replacement is unnecessary
· The standard specification uses the TC-MO with feed pump pressures up to 2 MPa.
· Use the TC-MO-SB to handle feed pump pressures up to 5 MPa.
· Also Supports Mist Specifications
· HA-M type that supports center through coolant
· Characteristics and specifications conform to the HA-M type
· The flange through oil hole type (-OHF) is available upon order
· Unlike the spring collet, tap attachment and detachment can be performed in a single action
· Remeasurement of tool length after tap replacement is unnecessary
· The standard specification uses the TC-MO with feed pump pressures up to 2 MPa.
· Use the TC-MO-SB to handle feed pump pressures up to 5 MPa.
· Also Supports Mist Specifications
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Référence pièce
|
|---|
| BT40-HA1022-M-OHC |
| BT40-HA412-M-OHC |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Spindle types | Holder Length L (mm) | C1 (mm) | Capacity Range | Mass (g) | L1 (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|
345.28 € | 1 | 8 jours | BT40 | 150 | 50 | M8～M27 | 1460 | 85 | ||
311.96 € | 1 | 8 jours | BT40 | 120 | 35 | M3～M16 | 1190 | 76.5 |
Loading...
Informations de base
| Product Category | Corps principal | Applicable Manufacturing Machinery (main unit) | Centres d'usinage | Features | HA-M Type supporting center coolant-through. Specifications and characteristics accord with HA-M Type. Special flange-through oil hole type (-OHF) can be specially made to order. Unlike spring collet, tap attachment and detachment can be performed in single action. No tool length re-measurement after tap replacement necessary. Uses TC-MO Type with 2 MPa supply pump pressure as standard. Use of TC-MO-SB Type supports maximum supply pump pressure of 5 MPa. Can support mist specification. |
|---|
Configurer
Propriétés de base
-
Holder Length L(mm)
-
C1(mm)
-
Capacity Range
- M3～M16
- M8～M27
- M18～M38
-
Type
- HA-M-OHC
-
Spindle types
- BT30
- BT40
- BT50
Filtrer par jours d'expédition standard
-
- Tous les articles
- 8 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.