Adaptateur pour changement d'outil EY
[Features]
· No spindle nose modification whatsoever required.
· Tool length adjustment that requires accuracy is time-consuming work.
· The tool change adapter eliminates the trouble and enables reliable adjustment.
· Further, even attaching and detaching that required a lot of space up to now can be carried out extremely smoothly.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Référence pièce
|
|---|
| AE16-EYC16-35 |
| AE20-EYC16-35 |
| AE20-EYC20-35 |
| AE25-EYC20-35 |
| AE25-EYC25-40 |
| AE32-EYC25-40 |
| AE32-EYC32-45 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Retainable blade diameter (mm) | Length from Standard Diameter L1 (mm) | L2 (mm) | Mass (g) | Supported collets | Supported wrenches | B1 (mm) | B2 (mm) | Adapter Nut Screw M (mm) | Adapter Nut D2 (mm) | NY Nut D3 (mm) | Holder Standard Diameter D1 (mm) | Counterpart holder type | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
211.97 € | 1 | 6 jours | 0.5～10.0 | 35 | 25 | 108 | EY16 | EKS16R (For Tightening NY Nut) / EKS16R (for Tightening Adapter Nut) | 25 | 25 | M22×1.5 | 28 | 28 | 16.0 | ER16・ESX16 | ||
175.83 € | 1 | 6 jours | 0.5～10.0 | 35 | 25 | 150 | EY16 | EKS16R (For Tightening NY Nut) / EKS20R (for Tightening Adapter Nut) | 25 | 30 | M25 x 1.5 | 34 | 28 | 20.0 | ER20・ESX20 | ||
186.23 € | 1 | 6 jours | 0.5～13.0 | 35 | 25 | 168 | EY20 | EKS20R (For Tightening NY Nut) / EKS20R (for Tightening Adapter Nut) | 30 | 30 | M25 x 1.5 | 34 | 34 | 20.0 | ER20・ESX20 | ||
186.59 € | 1 | 6 jours | 0.5～13.0 | 35 | 24 | 240 | EY20 | EKS20R (For Tightening NY Nut) / EFS25 (for Tightening Adapter Nut) | 30 | - | M32 x 1.5 | 42 | 34 | 25.0 | ER25・ESX25 | ||
197.14 € | 1 | 6 jours | 0.5～16.0 | 40 | 31 | 288 | EY25 | EFS25 (For Tightening NY Nut) / EFS25 (for Tightening Adapter Nut) | - | - | M32 x 1.5 | 42 | 42 | 25.0 | ER25・ESX25 | ||
197.91 € | 1 | 6 jours | 0.5～16.0 | 40 | 25 | 436 | EY25 | EFS25/FS52 (For FS52, please use NDN20 of New Drill Mill Chuck) | - | - | M40 x 1.5 | 50 | 42 | 32.0 | ER32・ESX32 | ||
215.30 € | 1 | 6 jours | 2.5～20.0 | 45 | 30 | 478 | EY32 | EFS32/FS52 (For FS52, please use NDN20 of New Drill Mill Chuck) | - | - | M40 x 1.5 | 50 | 50 | 32.0 | ER32・ESX32 |
Loading...
Informations de base
| Product Category | Accessoires | Features 1 | Spindle nose modification is not necessary at all. |
|---|
Configurer
Propriétés de base
-
Retainable blade diameter(mm)
-
Length from Standard Diameter L1(mm)
- 35
- 40
- 45
-
L2(mm)
-
Mass(g)
-
Supported collets
- EY16
- EY20
- EY25
- EY32
-
Supported wrenches
- EKS16R (For Tightening NY Nut) / EKS16R (for Tightening Adapter Nut)
- EKS16R (For Tightening NY Nut) / EKS20R (for Tightening Adapter Nut)
- EKS20R (For Tightening NY Nut) / EKS20R (for Tightening Adapter Nut)
- EKS20R (For Tightening NY Nut) / EFS25 (for Tightening Adapter Nut)
- EFS25 (For Tightening NY Nut) / EFS25 (for Tightening Adapter Nut)
- EFS25/FS52 (For FS52, please use NDN20 of New Drill Mill Chuck)
- EFS32/FS52 (For FS52, please use NDN20 of New Drill Mill Chuck)
-
Type
- AE-EYC
Filtrer par jours d'expédition standard
-
- Tous les articles
- 6 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.