Bande polygonale A【10 pièces par conditionnement】

Référence pièce

Vous pouvez trouver ici le numéro
de référence lié au produit recherché.

Référence pièce
PGB2025-A-60
PGB2025-A-80
PGB2025-A-120
PGB3030-A-120
Référence pièce
Prix unitaire standard
Nombre de pièce(s) incluse(s) dans le conditionnementQuantité minimale de commandeRemise sur volume
Jour
d'expédition standard
?
Width
(mm)
Particle Size
(#)
Max. Rotational Speed
(min-1(r.p.m))
Internal Diameter
(mm)
Trusco Code Order Code

39.87 €

10 pièces par conditionnement

1 paquet 5 jours 25602000020395-1723468-27191

39.87 €

10 pièces par conditionnement

1 paquet 7 jours 25802000020395-1731468-27207

39.87 €

10 pièces par conditionnement

1 paquet 6 jours 251202000020395-1715468-27225

47.17 €

10 pièces par conditionnement

1 paquet 7 jours 301201300030395-1855468-27304

Loading...

  1. 1

Informations de base

Application Polissage Type Bande Details Type A Type
Application Deburring after drilling; fine adjustment of inner diameters etc. and inner surface polishing of curved surfaces and pipes etc.; weld bead removal; removal of rust caused by machinery maintenance, etc. for sputtering equipment; paint peeling, finishing work, and deburring after cutting, etc.; and hairline, etc. order finishing as a substitute for work done using a grinding wheel with a shaft or a carbide bar, such as aluminum casting parting line removal, and deburring, etc. Packaging Quantity(units/sheets) 10 Caution * Never use beyond the maximum usage rotation number. * Be sure to insert the red finished surface of the polygon band facing in front of the drum shaft before use. * Please securely affix the dedicated drum shaft by inserting the rotation tool (grinder, drill, etc.) 2/3 of the shaft length. * When performing polishing work, please wear protective glasses, a dust mask, gloves, and a hat. * Please store away from direct sunlight, extreme aridity, and/or high humidity conditions. * Please read the handling instructions for the disk grinder to be used, and use only upon confirming that the product is in compliance.
Abrasive material A Features Workpiece is regarded as a plane, not as a point, thus dramatically increasing work efficiency (approx. three times greater efficiency). Thanks to air cooling effect of multi-blade shape, less heat accumulates on the workpiece. By installing dedicated drum, one-touch conversion to required particle level is possible. Environmentally friendly, with 1/3 of industrial waste. Hairline finishing is easy and neat. No deep craving thanks to a soft touch.

Assistance technique