Inscription
Configurer
NAKAMURA MFG

Clé dynamométrique Kanon de marquage (estampage), type N-MQLK

Clé dynamométrique Kanon de marquage (estampage), type N-MQLK

Référence pièce:

encore indéterminée. 3 références possibles.
    Quantité :

    Liste des numéros de pièces

    Nombre d’articles
  • 1
    • Référence pièce
    N50MQLK
    N100MQLK
    N140MQLK

    Torque adjustment range

    (N·m)

    Minimum graduation

    (N·m)

    Overall Length

    (mm)

    Longueur effective

    (mm)

    Entraînement carré

    (mm)

    Pièce de tête (H)

    (mm)

    Pièce de tête (G)

    (mm)

    Pièce de tête (S)

    (mm)

    Pièce de tête (R)

    (mm)

    Corps de meuble (A)

    (mm)

    Corps de meuble (E)

    (mm)

    Corps de meuble (øC)

    (mm)

    Masse

    (g)

    Dimensions de manchons en charge

    (mm)

    Quantité par paquet

    		Quantité minimale de commande
    10–50
    0.5
    254
    180
    9.53(3/8″)
    54
    11
    32
    16
    25
    11.4
    20
    550
    8~24
    1 pc.
    1 pièces
    20~100
    1
    352
    280
    12.7(1/2″)
    57
    14
    39.4
    19.7
    27.5
    12.4
    21.7
    890
    13～24
    1 pc.
    1 pièces
    40～140
    1
    392
    320
    12.7(1/2″)
    57
    14
    39.4
    19.7
    27.5
    12.4
    21.7
    950
    13～24
    1 pc.
    1 pièces
    Prix unitaire (hors TVA)(Prix unitaire TTC)
    Jour d'expédition standard
    534.00 €
    ( 635.46 € )
    23 jours ouvrables
    560.46 €
    ( 666.95 € )
    8 jours ouvrables
    565.71 €
    ( 673.19 € )
    23 jours ouvrables
  • 1

    • Plus d'informations

    Informations de base

    [Features]
    · Never miss a place where bolts have not been tightened. The bolt head is marked "Pon". Commercially available socket-compatible type.
    · Since marking is done automatically, there is no need to perform marking work after tightening. Truly the last word in error-proofing.
    · Marking is performed after the completion of tightening, serving as "the evidence of proper tightening."
    · The torque wrench's socket supports one commercially available deep socket. (Note: Mounting hole machining is required.)
    · The ink used is an oil-based ink made by Shachihata, so the marks are non-erasable.
    · For each ink charge, sockets of 8 to 13 mm in size can be filled approximately 1,500 times. The 14-24 mm products allow marking approximately 6,000 times.
    · Red ink is included as an accessory.
    · Its simple structure makes maintenance easy
    · The accuracy is guaranteed up to ±3%.