Rockwell hardness testing machine (810-193-31)
Détails du produit:
Référence fabricant: 810-193-31
Marque: MITUTOYO
Prix: 9,390.79 €
Délai de livraison: 60 jours
Données techniques:
Poids de la machine: 49,3 kg
Pénétrateur Brinell bille uniquement 1 mm: HBW 1/10; HBW 1/30 - nur Eindruck (nicht normgerecht durch Anwendung der Prüfvorkraft)
Pénétrateur Brinell bille uniquement 10 mm: HBW 10/100 - nur Eindruck (nicht normgerecht durch Anwendung der Prüfvorkraft)
Sortie données: Digimatic (SPC), RS-232C
Afficheur: Matrix backlight LCD
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
810-193-31
Référence pièce
|
|---|
| 810-193-31 |
| Référence pièce | Relatif à |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Poids de la machine (kg) | Pénétrateur Brinell bille uniquement 1 mm | Pénétrateur Brinell bille uniquement 10 mm | Sortie données | Afficheur | Fonctions | Poids brut (gr) | Résolution HR | Modèle | Poids net (gr) | Précharge (N) | Réglage de la precharge | Résolution | Rockwell superficiel bille 1/16 | Rockwell superficiel bille 1/2 | Rockwell superficiel bille 1/8 | Rockwell superficiel bille 1/4 | Rockwell superficiel diamant | Normes | Application de la charge d'essai | Durée de la force de test | Sélection de la charge d'essai | Dureté Rockwell superficielle (N) | Désignation | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
9,390.79 € | 1 | 60 jours | 49,3 | HBW 1/10; HBW 1/30 - nur Eindruck (nicht normgerecht durch Anwendung der Prüfvorkraft) | HBW 10/100 - nur Eindruck (nicht normgerecht durch Anwendung der Prüfvorkraft) | Digimatic (SPC), RS-232C | Matrix backlight LCD | GO/NG, Hardness value offset, Hardness conversion, Data output, Calibration mode | 70,000 | 0,1 HR | HR-430MR | 49,300 | 98,07 | - | Lecture 0,1 HR | - | - | - | - | - | JIS B 7726; ISO6508-2; ASTM E18 | Automatic | Settable 1-99s. | Dial switching | - | The HR-430MR is an economical Rockwell hardness testing machine to suit practically every application you need. The MR indicates the Rockwell testforce range.It offers you the following benefits:The frame was designed with great care to provide maximum clearance for positioning the work piece. All you need is a flat table for mounting these testing machines.Its outstanding robustness makes it perfect for even the roughest environments.The HR-430MR is very simple to operate. It uses automatic steering wheel braking and load sequencing for easy handling.You can attach the clamping device K543817 to for safe operation with hard to handle workpieces.This digital model can use our Digimatic Mini-processor (DP-1VR) for printing results, and you can use an input tool (USB-ITN-E) to connect to a PC for data transfer, analysis and storage.You can perform Brinell hardness tests, as indicated, by using the following optional accessories:a Brinell indenter and a measurement microscope. |
Loading...
Informations de base
| Product Type | Contrôle de la dureté | Adaptation de l'enclume(mm) | Ø 19 | Hauteur(mm) | Max. 180 (100 si le couvercle est fixé) |
|---|---|---|---|---|---|
| Test Jominy*** | Accessoires complémentaires requis | Dimensions de l'unité principale(mm) | 214x512x780 | Hauteur maximale de l'échantillon(mm) | 180 |
| Poids maximal de l'échantillon(kg) | 20 | Profondeur(mm) | Max. 165 mm (à partir de l'axe du pénétrateur) | Rockwell bille 1/16 | HRFW; HRBW; HRGW |
| Rockwell bille 1/2 | HRRW; HRSW; HRVW | Rockwell bille 1/8 | HRHW; HREW; HRKW | Rockwell bille 1/4 | HRLW; HRMW; HRPW |
| Rockwell diamant | HRA; HRD; HRC | Accessoires standard | 810-39 Flat anvil Ø64mm 810-40 V-anvil outside diameter Ø40mm groove width 30mm11AAB941 Water level383876 Vinyl cover357651 AC adaptorIndenters, reference materials and power cord not included | Dureté Rockwell(N) | 588,4; 980,7; 1471 |
| Profondeur maxi(mm) | 165 |
Vous vous trouvez sur la page de Rockwell hardness testing machine, le numéro d'article est le suivant: 810-193-31.
Veuillez trouver plus de détails concernant les particularités et les dimensions sous le numéro d'article 810-193-31.
Configurer
Propriétés de base
-
Réglage de la precharge
- Dial switching
-
Rockwell superficiel bille 1/16
- HR15TW, HR30TW; HR45TW
-
Rockwell superficiel bille 1/2
- HR15YW, HR30YW; HR45YW
-
Rockwell superficiel bille 1/8
- HR15WW, HR30WW; HR45WW
-
Rockwell superficiel bille 1/4
- HR15XW, HR30XW; HR45XW
-
Rockwell superficiel diamant
- HR15N; HR30N; HR45N
-
Dureté Rockwell superficielle(N)
- 147,1; 294,2; 441,3
-
Type
-
Poids de la machine(kg)
- 47
- 49,3
- 49,9
-
Pénétrateur Brinell bille uniquement 1 mm
- HBW 1/10; HBW 1/30 - indentation only (not according to standard)
- HBW 1/10; HBW 1/30 - nur Eindruck (nicht normgerecht durch Anwendung der Prüfvorkraft)
-
Pénétrateur Brinell bille uniquement 10 mm
- HBW 10/100 - indentation only (not according to standard)
- HBW 10/100 - nur Eindruck (nicht normgerecht durch Anwendung der Prüfvorkraft)
- HBW 10/100 - nur Eindruck (nicht normgerecht durch Anwendung der Prüfvorkraft)
-
Sortie données
- Digimatic (SPC), RS-232C
-
Afficheur
- Analogue dial indicator
- Matrix backlight LCD
-
Fonctions
- To observe the hardness number within 0,2 HR of the scale unit, as required by ISO 6508-2, the displayed result is to be judged by the dial hand width within the step of the dial gage scale.
- GO/NG, Hardness value offset, Hardness conversion, Data output, Calibration mode
-
Poids brut(gr)
- 69,000
- 70,000
- 72,000
-
Résolution HR
- 0,1 HR
- 0,5 HR
-
Modèle
-
Poids net(gr)
- 45,600
- 49,300
- 49,900
-
Précharge(N)
- 29,42; 98.07
- 98,07
-
Résolution
- Lecture 0,1 HR
- Lecture 0,5 HR
-
Normes
- JIS B 7726, ISO6508-2
- JIS B 7726; ISO6508-2; ASTM E18
-
Application de la charge d'essai
- Automatic
- Semi-automatic
-
Durée de la force de test
- Settable 1-99s.
- Fixe 3-5-5 secondes ou manuel
-
Sélection de la charge d'essai
- Dial switching
- Manual weight exchange
-
Désignation
- The HR-430MS is an economical Rockwell hardness testing machine to suit practically every application you need. The MS indicates the Rockwell and Rockwell Superficial testforce range. It offers you the following benefits:The frame was designed with great care to provide maximum clearance for positioning the work piece. All you need is a flat table for mounting these testing machines.Its outstanding robustness makes it perfect for even the roughest environments.The HR-430MS is very simple to operate. It uses automatic steering wheel braking and load sequencing for easy handling.This digital model can use our Digimatic Mini-processor (DP-1VR) for printing results, and you can use an input tool (USB-ITN-E) to connect to a PC for data transfer, analysis and storage.You can perform Brinell hardness tests, as indicated, by using the following optional accessories: a Brinell indenter and a measurement microscope.
- The HR-430MR is an economical Rockwell hardness testing machine to suit practically every application you need. The MR indicates the Rockwell testforce range.It offers you the following benefits:The frame was designed with great care to provide maximum clearance for positioning the work piece. All you need is a flat table for mounting these testing machines.Its outstanding robustness makes it perfect for even the roughest environments.The HR-430MR is very simple to operate. It uses automatic steering wheel braking and load sequencing for easy handling.You can attach the clamping device K543817 to for safe operation with hard to handle workpieces.This digital model can use our Digimatic Mini-processor (DP-1VR) for printing results, and you can use an input tool (USB-ITN-E) to connect to a PC for data transfer, analysis and storage.You can perform Brinell hardness tests, as indicated, by using the following optional accessories:a Brinell indenter and a measurement microscope.
- The HR-210MR is an economical Rockwell hardness testing machine to suit practically every application you need. The MR indicates the Rockwell testforce range.It offers you the following benefits:The frame was designed with great care to provide maximum clearance for positioning the work piece. All you need is a flat table for mounting these testing machines.Its outstanding robustness makes it perfect for even the roughest environments.You can attach the clamping device K543817 to for safe operation with hard to handle workpieces.The analogue type HR-210MR uses an automatic presetting dial gauge which makes it easy to operate.You can perform Brinell hardness tests, as indicated, by using the following optional accessories:a Brinell indenter and a measurement microscope.
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
- 60 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Variantes de ce produit
| Référence pièce |
|---|
| 810-191-21 |
| 810-194-31 |
| Référence pièce | Relatif à | Prix unitaire standard | Quantité minimale de commande | Remise sur volume | Jour d'expédition standard ? | Poids de la machine (kg) | Pénétrateur Brinell bille uniquement 1 mm | Pénétrateur Brinell bille uniquement 10 mm | Sortie données | Afficheur | Fonctions | Poids brut (gr) | Résolution HR | Modèle | Poids net (gr) | Précharge (N) | Réglage de la precharge | Résolution | Rockwell superficiel bille 1/16 | Rockwell superficiel bille 1/2 | Rockwell superficiel bille 1/8 | Rockwell superficiel bille 1/4 | Rockwell superficiel diamant | Normes | Application de la charge d'essai | Durée de la force de test | Sélection de la charge d'essai | Dureté Rockwell superficielle (N) | Désignation |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
5,494.74 € | 1 | 5 jours | 47 | HBW 1/10; HBW 1/30 - indentation only (not according to standard) | HBW 10/100 - indentation only (not according to standard) | - | Analogue dial indicator | To observe the hardness number within 0,2 HR of the scale unit, as required by ISO 6508-2, the displayed result is to be judged by the dial hand width within the step of the dial gage scale. | 69,000 | 0,5 HR | HR-210MR | 45,600 | 98,07 | - | Lecture 0,5 HR | - | - | - | - | - | JIS B 7726, ISO6508-2 | Semi-automatic | Fixe 3-5-5 secondes ou manuel | Manual weight exchange | - | The HR-210MR is an economical Rockwell hardness testing machine to suit practically every application you need. The MR indicates the Rockwell testforce range.It offers you the following benefits:The frame was designed with great care to provide maximum clearance for positioning the work piece. All you need is a flat table for mounting these testing machines.Its outstanding robustness makes it perfect for even the roughest environments.You can attach the clamping device K543817 to for safe operation with hard to handle workpieces.The analogue type HR-210MR uses an automatic presetting dial gauge which makes it easy to operate.You can perform Brinell hardness tests, as indicated, by using the following optional accessories:a Brinell indenter and a measurement microscope. | |||
10,646.05 € | 1 | 5 jours | 49,9 | HBW 1/10; HBW 1/30 - nur Eindruck (nicht normgerecht durch Anwendung der Prüfvorkraft) | HBW 10/100 - nur Eindruck (nicht normgerecht durch Anwendung der Prüfvorkraft) | Digimatic (SPC), RS-232C | Matrix backlight LCD | GO/NG, Hardness value offset, Hardness conversion, Data output, Calibration mode | 72,000 | 0,1 HR | HR-430MS | 49,900 | 29,42; 98.07 | Dial switching | Lecture 0,1 HR | HR15TW, HR30TW; HR45TW | HR15YW, HR30YW; HR45YW | HR15WW, HR30WW; HR45WW | HR15XW, HR30XW; HR45XW | HR15N; HR30N; HR45N | JIS B 7726; ISO6508-2; ASTM E18 | Automatic | Settable 1-99s. | Dial switching | 147,1; 294,2; 441,3 | The HR-430MS is an economical Rockwell hardness testing machine to suit practically every application you need. The MS indicates the Rockwell and Rockwell Superficial testforce range. It offers you the following benefits:The frame was designed with great care to provide maximum clearance for positioning the work piece. All you need is a flat table for mounting these testing machines.Its outstanding robustness makes it perfect for even the roughest environments.The HR-430MS is very simple to operate. It uses automatic steering wheel braking and load sequencing for easy handling.This digital model can use our Digimatic Mini-processor (DP-1VR) for printing results, and you can use an input tool (USB-ITN-E) to connect to a PC for data transfer, analysis and storage.You can perform Brinell hardness tests, as indicated, by using the following optional accessories: a Brinell indenter and a measurement microscope. |
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.