Tableaux / armoires / boîtiers（Installation：À l'intérieur）

?* À propos du délai d'expédition et des prix

• 

  Boîte en aluminium type AWP avec protecteur

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · This aluminum case has a silicon protector for excellent shock resistance.
  · The heat-radiating aluminum case has a waterproof rating of IP67, offering a shield function.
  · There is an insert groove included inside the body frame enabling the board and chassis to slide in.
  · Choose from a total of 240 models (30 sizes available in 8 color specifications).
  · Suitable for measuring instruments, control box, communications equipment, etc.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	48.52 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Boîte plastique, série TW

  TAKACHI ELECTRONICS ENCLOSURE

  Plastic case (TW)
  
  [Features]
  - A small general-purpose plastic case with a screw-securing configuration.
  - The ABS-resin TW series comes in 26 sizes with 2 color specifications: G (light gray) and B (black). The flame-retardant ABS-resion TWN series comes in 23 sizes with one color specification: W (off-white).
  - Equipped with a boss for mounting on a circuit board.
  - Use on a variety of devices, such as measuring instruments, communication devices, and handheld controllers.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	1.51 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Boîte à dissipation thermique en aluminium AWA

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  ・An aluminum case that uses a heat-sink shaped aluminum extrusion
  ・A sophisticated design with a silver alumite finish on the panels
  ・The case has a shielding effect. The body-frame interior and the rear faces of the panels are conductive.
  · An insert groove is included inside the body frame enabling the board and chassis to be slid in.
  ・Ideal for use in industrial fan-less computers, measuring instruments, and digital audio amplifiers, etc.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	20.12 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Boîte en aluminium étanche à l'eau / aux poussières, type AWN

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · An aluminum case which with a waterproof rating of IP67.
  · Select from normal type or shield type.
  · The body frame is formed by aluminum extruded heat sink and the panels are aluminum die-cast, giving a strong construction.
  · There is an insert groove inside the body frame enabling the board and chassis to slide in.
  · Can be used for measuring devices, power supply equipment, control boxes, or industrial cameras.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	22.80 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Série BOXTM-200□

  TOYO GIKEN

  [Features]
  · Uses highly durable and chemically resistant PBT (UL94-0) in its insulation materials outside the box main body.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	37.73 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Boîte de commande plastique, modèle PF

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  - A panel plastic case with a flat design that has perfectly even panel surfaces.
  - Made from flame retardant ABS resin (UL94V-0) in all 8 sizes.
  - Available in off-white and dark gray.
  · Equipped with a boss for mounting on a circuit board.
  - Case with a design that makes it suitable for tabletop use or mounting to wall services.
  - May be used with a variety of devices, such as communication devices, measuring instrument controllers, etc.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	6.88 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Boîte portative étanche à l'eau, modèle WH

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  - Case that incorporates IP67 waterproof functionality in its tapered and sharp design.
  · The case material is flame retardant ABS resin (UL94V-0).
  · 4 battery configurations: AAA batteries × 4, AA battery × 3, AA battery × 2, and no batteries.
  - With +/- battery marks to prevent incorrect insertion.
  - Elastomer (TPE) side grip helps you maintain your grip. Features antishock functionality. 5 colors available.
  Can be used for various handheld equipment, such as measuring devices, inspection devices, communications equipment, and medical equipment, etc.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	10.96 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Support de fixation murale WM

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · A plastic wall bracket for installation of devices on walls.
  · Large and small sizes are available to suit the size of the device.
  · Suitable for a case thickness of t0.8～t3.5 and usable with a wide range of cases ranging from plate metal cases to plastic boxes.
  · Holes must be drilled in the case for mounting.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	3.21 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Steel Terminal Block Box, with Lid Model DIN Rail

  MISUMI

  Relay box with DIN rail model

  • Remise sur volume

  • Grande quantité possible (D-JIT)
  • Space-saving
  • Steel
  • Fixed Size

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	61.68 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Steel Terminal Block Box, with Door Model DIN Rail

  MISUMI

  Door-model relay box with DIN rail

  • Remise sur volume

  • Grande quantité possible (D-JIT)
  • Space-saving
  • Steel
  • Fixed Size

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	77.23 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Boîte de commande métallique (type fermé)

  KASUGA ELECTRIC

  A sturdy steel-plate metal control box.
  
  [Features]
  - The BXA series is a metal control box with an IP40 (closed) protective structure.
  - Add pilot lamps or control units to make any kind of control box you like.
  - The series consists of a bored type with mounting holes drilled into it and a hole-free type ready for cutting.
  - The bored type is available in 5 varieties, with anywhere from 1 to 6 mounting holes drilled.
  - The hole-free type has the same exterior as the 5 bored varieties.
  - Bored type also includes 4 variations in mounting hole size (16 mm, 22 mm, 35 mm, 30 mm).

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	24.95 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Boîte fine, série YM

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · Thin case (YM)

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	4.67 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Boîte plastique, série SY

  TAKACHI ELECTRONICS ENCLOSURE

  Plastic Case (SY)
  
  [Features]
  - Flat-plate panels make machining easy.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	13.37 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Série BOXTM-22

  TOYO GIKEN

  [Features]
  · The 22 Series is available with several variants such as high and low lids, transparent and opaque lids, etc.
  · Allows all manner of combinations.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	39.84 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Base de fixation en aluminium AWC

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · A mounting base used with the AW, AWN, and AWP series.
  · Can be mounted on power units, circuit board modules, terminal bases, and other devices by sliding into the body frame.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  Délai d'expédition minimum ：	5 jours

• 

  Protecteur en silicone AWSP【1-2 pièces par conditionnement】

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · A WNA and WNS series silicone protector.
  · Protects panel surface switches and connectors from the impact of falls, etc.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	19.87 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Boîte type coque série GL

  SETTSU METAL INDUSTRIAL

  Simple yet standard plastic case for electric equipment that is available in many types and a wide array of sizes
  
  [Features]
  · Plastic case that is a simple, basic, shell type for electronic devices.
  · Uneven engaging configuration allows for secure meeting of parts.
  · The inside has a groove for vertically mounting a circuit board.
  · The boss for mounting on a circuit board is provided on the upper and lower covers.
  · Conforms to protection class IP65 by using the optional sealing kit.
  · The GM series with battery box is also available.
  · Can be used as an interface, switch box or modem as a peripheral device for measurement, control, medical and research applications.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	55.48 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Boîtier robuste série VCA

  SETTSU METAL INDUSTRIAL

  [Features]
  - Waterproof and dust-proof box with a tough dual-layer structure.
  - Many size variations.
  - ABS types for normal use, while polycarbonate types are suited for high temperatures or severe environments.
  - Pre-assembled sealing provides IP66-level waterproof and dust-proof performance.
  - Assembly screws are positioned on the outside of the sealing, keeping the unit waterproof.
  - Lower-cover capping holes feature anti-corrosive screws.
  - Tapping included to insert assembly screws into convex and concave-cover types.
  - Reversible design; externals look the same regardless of which cover type is used.
  - Cover strip comes in light-gray standard (no holes or with holes); five other colors also available as options.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	110.23 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Terminal Datec, série VEA

  SETTSU METAL INDUSTRIAL

  Plastic case for inclined electronic devices suited for input terminals.
  
  [Features]
  - This Datec terminal is a plastic case for electronic devices that can be used in a wide range of desktop applications.
  - This case was developed for data collection and is characterized by its high degree of diversity.
  - The ergonomically designed sloping angle of the operable part allows for easy operation and reading.
  - Boasts a easy-to-assemble structure which reduces assembly and maintenance time and costs.
  - All assembly screws are hidden in the covering trim, making them invisible from the exterior.
  - Designed with flat surface parts suited for boring.
  - Protection rating of IP54.
  - Can be used for a wide range of applications, including machinery operation, data collection, entry and security management, measurement and control, heating and air-conditioning controls, medical treatment, safety management, etc.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	139.71 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Carry Tech série VUA

  SETTSU METAL INDUSTRIAL

  [Features]
  - Easy-to-carry plastic case for electronic equipment with a handle.
  - The design incorporates a handle for a broader range of possible new usage applications.
  - The handle is positioned above the center of gravity line of the case for a well-balance product design. It provides ergonomically designed superior operability.
  - The handle pad uses flexible TPE material (elastomer) that feels comfortable to the touch and prevents slipping.
  - The back face of the case incorporates indentations that make it easy to maintain your grip when holding it in your hand while working.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	103.82 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Boîte de raccordement carrée, série LS

  DAIWA DENGYO

  [Features]
  - A compact die-cast aluminum alloy branch box with excellent mechanical strength. (Lid is made from steel plate)
  - Dustproof and waterproof structure, with a protection grade of IP65 (mating surface between the main body and the lid).
  [Specifications]
  - Material: Diecast aluminum alloy (main body); cold-finished steel plate (lid); rubber packing
  - Weight: LS-2 165g; LS-4 177g
  [Product lineup]
  - LS-2: without bushing
  - LS-4: with bushing

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	37.38 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Boîte de commande série T

  SETTSU METAL INDUSTRIAL

  [Features]
  · Steel control box.
  · The door is secured using a simple clasp lock.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	70.73 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Mini boîte, série SB

  SETTSU METAL INDUSTRIAL

  [Features]
  · This metal case is suitable for a wide range of fields, such as electronic measurement devices.
  · Uses countersunk screws for assembly for an even and protrusion-free appearance.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	36.67 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Boîtier de module série CO

  SETTSU METAL INDUSTRIAL

  [Features]
  · This metal case is suitable for a wide range of fields, such as electronic measurement devices.
  · There are models with heat dissipating holes on the side of the case as well as those with feet (bottom legs).

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	20.21 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

Loading...