Nombre de jours d'expédition |
|
---|
?* À propos du délai d'expédition et des prix
SHINOHARA ELECTRIC
Use as a terminal processing bracket for a power cable
à partir de∗ : | 19.14 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
SHINOHARA ELECTRIC
Use as structural material for wiring board, cubicle, and control panel, and the like.
[Features]
• You can perform design changes, expansions, and renovations as the user like.
• Since outer box sheet metal processing and inner wiring are advanced through separate processes, the delivery time can be shortened.
• If an equipment and parts wiring diagram is available, the user can proceed with assembly wiring without waiting for completion of the casing box.
• Includes easy-to-use A.B.C. parts for the A.B.C. channel; improved efficiency.
* The characteristics of molten zinc plating process result in plating film left on the angle length hole, and in roughness in the surface finish. Please be aware of this.
à partir de∗ : | 33.26 € |
---|---|
Délai d'expédition minimum : | 8 jours |
*Prix unitaire/configuration de base
SHINOHARA ELECTRIC
Structural materials manufactured from fiberglass-reinforced plastic (FRP). For use in places where insulation properties are required. Note: The width dimension of model CF-45 has been partially modified (46 mm → 45 mm).
[Features]
· The angle/channel/square pipe structural materials (manufactured from FRP) are base materials that have been reinforced with glass fiber. These are structural materials that have been combined with a thermosetting resin and have insulating properties and strength not provided by ordinary plastics.
· This material is widely used as a structural insulating material.
· Easy to cut, drill, and process by machine, etc.
à partir de∗ : | 60.48 € |
---|---|
Prix spécial | |
Délai d'expédition minimum : | Jour même |
*Prix unitaire/configuration de base
SHINOHARA ELECTRIC
Used to protect ABC channel terminals.
[Features]
・cross-sectional burrs, etc. prevent damage and increase safety.
・This eliminates the need for cross-sectional processing with the intent of making work more efficient.
à partir de∗ : | 70.44 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
SHINOHARA ELECTRIC
Use the bracket for mounting protective plates on the inside of panels.
[Features]
· The protective plate can be suspended, so no troublesome cutting of keyholes is required.
· The protection plate can be suspended, so no troublesome tapping of screw holes in the panel is required.
· Easy to install and remove, so maintenance time for cleaning and inspection can be shortened by the improved workability.
· No mounting screws are required, so installation can be performed safely without any concern for losing screws.
· We can also manufacture products with an insulated protector plate (barrier plate) pre-installed. Please specify required dimensions.
à partir de∗ : | 6.38 € |
---|---|
Délai d'expédition minimum : | 10 jours |
*Prix unitaire/configuration de base
KOWA KASEI
Useful for supporting base rail mounts.
[Features]
· Useful as a support clasp for supporting base rail mounts.
à partir de∗ : | 41.95 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
KOWA KASEI
Useful for dealing with wiring bracket vibration
[Features]
· Attach to the wiring bracket to protect it from shocks.
· Can be installed on the top or bottom.
· Can be installed after wiring work is complete.
· Wiring work can be performed after installation
à partir de∗ : | 86.83 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
TAKACHI ELECTRONICS ENCLOSURE
Key ring
[Features]
· Strap equipped with a hook made of metal.
· Neck strap type includes removable parts and parts with adjustable length.
· To be used as a set with the CR key ring.
à partir de∗ : | 3.93 € |
---|---|
Prix spécial | |
Délai d'expédition minimum : | Jour même |
*Prix unitaire/configuration de base
TAKACHI ELECTRONICS ENCLOSURE
[Features]
· Mounting bracket
à partir de∗ : | 4.58 € |
---|---|
Prix spécial | |
Délai d'expédition minimum : | Jour même |
*Prix unitaire/configuration de base
TAKACHI ELECTRONICS ENCLOSURE
[Features]
- Opening/Closing Hinge, (FW)
à partir de∗ : | 14.18 € |
---|---|
Délai d'expédition minimum : | 8 jours |
*Prix unitaire/configuration de base
TAKACHI ELECTRONICS ENCLOSURE
L-type Mounting Bracket (HYCL Series)
[Features]
· To be used for mounting circuit boards or chassis other than HYC type HY dedicated chassis.
· L-bracket and screw set-only product.
à partir de∗ : | 15.46 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
TAKACHI ELECTRONICS ENCLOSURE
L-bracket (MSCL Series)
[Features]
· To be used for mounting circuit boards or chassis other than MSC type MS/MSN/MSY/MO/MON/MOY dedicated chassis.
· L-bracket-only product.
à partir de∗ : | 10.30 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
TAKACHI ELECTRONICS ENCLOSURE
OPCMOPCP/OABP/RPCP/WPCP/WABP Dedicated External Mounting Foot
[Features]
· Attached using the included screws after first inserting into the holes on the bottom
à partir de∗ : | 8.74 € |
---|---|
Délai d'expédition minimum : | 7 jours |
*Prix unitaire/configuration de base
TAKACHI ELECTRONICS ENCLOSURE
Hinge (OHI)
[Features]
- Mounting template with screws included
à partir de∗ : | 12.61 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
TAKACHI ELECTRONICS ENCLOSURE
Steel Rack Mounting Angle (RSE Series)
[Features]
· Can be used in combination with a variety of L dimensions.
· Rack mounting angle for EIA standard woodworking tables.
· A wide range of SRE rack storage shelves can be used.
à partir de∗ : | 12.35 € |
---|---|
Prix spécial | |
Délai d'expédition minimum : | Jour même |
*Prix unitaire/configuration de base
TAKACHI ELECTRONICS ENCLOSURE
[Features]
· Chassis mounting bracket (UCK-P) for UC/UCN/UCY.
à partir de∗ : | 5.15 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
TAKACHI ELECTRONICS ENCLOSURE
[Features]
- External mounting feet for HQ.
à partir de∗ : | 7.35 € |
---|---|
Délai d'expédition minimum : | 7 jours |
*Prix unitaire/configuration de base
TAKACHI ELECTRONICS ENCLOSURE
Belt for Pole Anchoring
[Features]
· Belt for mounting to poles and telephone poles.
· Available in 2 types: stainless steel version with strong tightening force, and plastic version that is easy to mount.
· Can be used to mount not only plastic boxes but various other products as well.
· To be used together with the SSK type pole mounting bracket.
· Disposable single-use type.
à partir de∗ : | 11.37 € |
---|---|
Prix spécial | |
Délai d'expédition minimum : | Jour même |
*Prix unitaire/configuration de base
TAKACHI ELECTRONICS ENCLOSURE
[Features]
- Ball Mounting Bracket
à partir de∗ : | 9.42 € |
---|---|
Prix spécial | |
Délai d'expédition minimum : | Jour même |
*Prix unitaire/configuration de base
TAKACHI ELECTRONICS ENCLOSURE
[Features]
· Use when installing a unit panel on a rear surface
à partir de∗ : | 13.35 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
TAKACHI ELECTRONICS ENCLOSURE
Chassis Reinforcement Bracket (AC-K)
[Features]
· To be used as a reinforcing anchor to prevent deflection of the central part of the chassis when a load is placed on it. (When actually used, it must be checked by using the load resistance test of the product.)
· Holes must be bored into the chassis for mounting.
à partir de∗ : | 11.21 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
TAKACHI ELECTRONICS ENCLOSURE
The product has an added gray color to match the color of the BCPC/BCPK/BCPR series.
[Features]
· Optional part.
▪ This is a plastic mounting stand that looks like a box.
▪ The product is strong as it is made from glass fiber-reinforced polycarbonate
à partir de∗ : | 4.39 € |
---|---|
Délai d'expédition minimum : | 7 jours |
*Prix unitaire/configuration de base
TAKACHI ELECTRONICS ENCLOSURE
Chassis Anchoring Bracket (FCK Series)
[Features]
· To be used for mounting DIN rails, etc. (other than those for dedicated chassis).
· In the FCK-1, the chassis is 13 mm from the panel, and 23 mm in the FCK-2.
à partir de∗ : | 10.33 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
TAKACHI ELECTRONICS ENCLOSURE
[Features]
- Mounting Boss (T-600)
à partir de∗ : | 11.00 € |
---|---|
Délai d'expédition minimum : | Jour même |
*Prix unitaire/configuration de base
TAKACHI ELECTRONICS ENCLOSURE
Mounting Boss (T-700)
[Features]
- Because it is affixed by double-sided tape, it can be easily mounted to cases and boxes, allowing circuit boards and chassis to be mounted to cases and boxes with no boss.
à partir de∗ : | 11.74 € |
---|---|
Délai d'expédition minimum : | Jour même |
*Prix unitaire/configuration de base
TAKACHI ELECTRONICS ENCLOSURE
Panel Vibration Prevention Bracket (UCF) for UC, UCN, and UCY
[Features]
· To be used for suppressing vibration of the front and back panels of a case.
· Can be used in combination with a chassis mounting bracket.
à partir de∗ : | 1.51 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
OHM ELECTRIC
Simple mounting that does not require a lot of space. Part mounting is possible even in locations where door and other drilling taps, or welding processes, cannot be performed.
[Features]
・Parts mounting is possible even in locations where door and other drilling taps, or welding processes, cannot be performed.
・OL-A, B type is fixed by adhesive.
・Simple usage can be performed.
・The OL-E type can be used as a 20 mm high spacer.
・Boosts the insulation and quake resistance of mounted parts.
à partir de∗ : | 1.32 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
KASUGA ELECTRIC
[Features]
· Simplifies wiring by lifting the rail and changing the mounting angle.
· Enables the mounting of terminal blocks to corners of boards and inside confined mounting spaces.
à partir de∗ : | 0.77 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
TAKACHI ELECTRONICS ENCLOSURE
Main body mounting accessories
à partir de∗ : | 5.15 € |
---|---|
Délai d'expédition minimum : | 7 jours |
*Prix unitaire/configuration de base
TAKACHI ELECTRONICS ENCLOSURE
Dedicated external mounting feet for the AD and BDN type.
à partir de∗ : | 4.58 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
TAKACHI ELECTRONICS ENCLOSURE
[Features]
· Used as a reinforcing fixture for the central part of the chassis when placing a load on the chassis.
· Boring holes (2-φ3.5) into the chassis and panel side is necessary when mounting to a chassis.
· The positioning can be adjusted as required by changing the hole boring position.
· If the chassis mounting fitting FCK-1 is used, please use the FCC-K-1 fixture.
· If the chassis mounting fitting FCK-2 is used, please use the FCC-K-2 fixture.
à partir de∗ : | 6.15 € |
---|---|
Délai d'expédition minimum : | 8 jours |
*Prix unitaire/configuration de base
MIRAI INDUSTRY
[Features]
· Boxes can be easily mounted using a wall face or slab reinforcement, preventing tilting and anchoring the box in place (box can be anchored in a straight orientation).
· The bar is a freely bendable φ4 mm iron wire, so the height of the box can be freely adjusted based on the thickness of the wall.
à partir de∗ : | 2.12 € |
---|---|
Délai d'expédition minimum : | 7 jours |
*Prix unitaire/configuration de base
MIRAI INDUSTRY
[Features]
· A connector can be mounted to the knockouts on the back of the box.
· Lean prevention bar is available in φ4-mm and easy-to-bend φ 3-mm types (excluding notched and adhesive types).
· A glued (with adhesive) type is a type where an adhesive is melted using a torch, etc. and then affixed to a box.
· Types with knockouts (without 9.5-mm stud) can be mounted even for boxes with heat insulating covers or boxes with heat insulating sheets attached (those with knockouts on the back cannot be used).
à partir de∗ : | 2.03 € |
---|---|
Délai d'expédition minimum : | 7 jours |
*Prix unitaire/configuration de base
MIRAI INDUSTRY
[Features]
· A connector can be mounted to the knockouts on the back of the box.
· Lean prevention bar comes in 4 mm and easy-to-bend 3 mm diameter types (excluding notched and adhesive types).
· A glued (with adhesive) type is a type where an adhesive is melted using a torch, etc. and then affixed to a box.
· Types with knockouts (no 3 minute start) can be mounted even for boxes with heat-insulating covers or boxes with heat-insulating sheets attached (those with knockouts on back cannot be used).
à partir de∗ : | 2.70 € |
---|---|
Délai d'expédition minimum : | 7 jours |
*Prix unitaire/configuration de base
TAKACHI ELECTRONICS ENCLOSURE
[Features]
・Optional part that allows panels, poles, and more to be mounted.
・Please use when securing relay connectors.
à partir de∗ : | 3.78 € |
---|---|
Délai d'expédition minimum : | 7 jours |
*Prix unitaire/configuration de base
SETTSU METAL INDUSTRIAL
[Features]
· Attachable metal fittings for use with batteries in a compatible plastic case.
· The negative side is a spring, making it easy to distinguish between positive and negative.
· Fit-in type makes mounting easy.
à partir de∗ : | 6.97 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
à partir de∗ : | 7.83 € |
---|---|
Délai d'expédition minimum : | 10 jours |
*Prix unitaire/configuration de base
SHINOHARA ELECTRIC
● Applications:
For use as the installation bracket for knobs or toggle switches on distribution boards, control panels or operating panels.
à partir de∗ : | 3.35 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
SHINOHARA ELECTRIC
● Applications:
For use as a push-button switch mounting fixture.
à partir de∗ : | 4.51 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
SHINOHARA ELECTRIC
● Applications:
For use as the installation base for knobs or toggle switches.
à partir de∗ : | 4.13 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
SHINOHARA ELECTRIC
● Applications:
Use together with ABC channel. Use as an auxiliary mounting fitting for equipment, wiring ducts, and terminal blocks, etc.
à partir de∗ : | 0.94 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
RITTAL
[Product specifications]
· Materials: steel
· Surface treatment: zinc plating
[Applications]
· Model number 21503010: for AE/KL
· Model number 21508010: for AE/KL
· Model number 21508100: for AE
à partir de∗ : | 10.48 € |
---|---|
Délai d'expédition minimum : | 7 jours |
*Prix unitaire/configuration de base
RITTAL
[Product specifications]
· Materials: steel
· Surface treatment: zinc plating
à partir de∗ : | 4.68 € |
---|---|
Délai d'expédition minimum : | 7 jours |
*Prix unitaire/configuration de base
GANTER
Fastening sets GN 181 make it possible to mount different cabinet "U" handles and tubular handles with internal thread from the operator's side.
The mounting position of the fastening plates is freely customizable, allowing a sideways offset or mounting with different drillhole spacings.
A fastening set consists of 2 fastening plates and 2 countersunk screws.
à partir de∗ : | 2.79 € |
---|---|
Prix spécial | |
Délai d'expédition minimum : | Jour même |
*Prix unitaire/configuration de base
à partir de∗ : | 20.75 € |
---|---|
Délai d'expédition minimum : | 7 jours |
*Prix unitaire/configuration de base
Marque |
---|
Série du produit |
CAD |
à partir de∗ |
Délai d'expédition minimum |
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||
Marque | SHINOHARA ELECTRIC | SHINOHARA ELECTRIC | SHINOHARA ELECTRIC | SHINOHARA ELECTRIC | SHINOHARA ELECTRIC | KOWA KASEI | KOWA KASEI | TAKACHI ELECTRONICS ENCLOSURE | TAKACHI ELECTRONICS ENCLOSURE | TAKACHI ELECTRONICS ENCLOSURE | TAKACHI ELECTRONICS ENCLOSURE | TAKACHI ELECTRONICS ENCLOSURE | TAKACHI ELECTRONICS ENCLOSURE | TAKACHI ELECTRONICS ENCLOSURE | TAKACHI ELECTRONICS ENCLOSURE | TAKACHI ELECTRONICS ENCLOSURE | TAKACHI ELECTRONICS ENCLOSURE | TAKACHI ELECTRONICS ENCLOSURE | TAKACHI ELECTRONICS ENCLOSURE | TAKACHI ELECTRONICS ENCLOSURE | TAKACHI ELECTRONICS ENCLOSURE | TAKACHI ELECTRONICS ENCLOSURE | TAKACHI ELECTRONICS ENCLOSURE | TAKACHI ELECTRONICS ENCLOSURE | TAKACHI ELECTRONICS ENCLOSURE | TAKACHI ELECTRONICS ENCLOSURE | OHM ELECTRIC | KASUGA ELECTRIC | TAKACHI ELECTRONICS ENCLOSURE | TAKACHI ELECTRONICS ENCLOSURE | TAKACHI ELECTRONICS ENCLOSURE | MIRAI INDUSTRY | MIRAI INDUSTRY | MIRAI INDUSTRY | TAKACHI ELECTRONICS ENCLOSURE | SETTSU METAL INDUSTRIAL | SHINOHARA ELECTRIC | SHINOHARA ELECTRIC | SHINOHARA ELECTRIC | SHINOHARA ELECTRIC | SHINOHARA ELECTRIC | RITTAL | RITTAL | GANTER | RITTAL |
Série du produit | Embout de protection de canal【50 pièces par conditionnement】 | Suspension pour support de câbles【50 pièces par conditionnement】 | Support de montage, série CK【2-100 pièces par conditionnement】 | Support de montage type L, série HYCL【2 pièces par conditionnement】 | Série OFL, pied d'installation externe【4 pièces par conditionnement】 | Support de montage de châssis série UCK-P【4 pièces par conditionnement】 | Pieds de montage externe série HQF【4 pièces par conditionnement】 | Courroie pour fixation de poteau, série PKB【2 pièces par conditionnement】 | Support de montage à rotule, série SSK【2-4 pièces par conditionnement】 | Type BFL - Colonne de montage en plastique externe【4 pièces par conditionnement】 | Support de fixation de châssis, série FCK【10 pièces par conditionnement】 | Raccord à visser - série T-600【10 pièces par conditionnement】 | Raccord à visser - série T-700【10 pièces par conditionnement】 | Support antivibration pour panneau, série UCF【2 pièces par conditionnement】 | Verrou sans pièce pour montage de pièces, série OL【1-500 pièces par conditionnement】 | Série SFL, pied d'installation externe【4 pièces par conditionnement】 | Accessoires type AD BDN : Pieds de montage externes【2-4 pièces par conditionnement】 | Élément de renfort de châssis modèle FCC-K【2 pièces par conditionnement】 | Support de fixation pour THB387, 391, 390, 400, 401L, 402T et 399Y | Pièces ABC (support auxiliaire)【1-100 pièces par conditionnement】 | Base mounting bracket for cast feet【4 pièces par conditionnement】 | ||||||||||||||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||
à partir de∗ | 19.14 € *Prix unitaire/configuration de base | 33.26 € *Prix unitaire/configuration de base | 60.48 € Prix spécial *Prix unitaire/configuration de base En promotion jusqu’au 31/03/2023Remise sur volume | 70.44 € *Prix unitaire/configuration de base | 6.38 € *Prix unitaire/configuration de base | 41.95 € *Prix unitaire/configuration de base Remise sur volume | 86.83 € *Prix unitaire/configuration de base Remise sur volume | 3.93 € Prix spécial *Prix unitaire/configuration de base En promotion jusqu’au 31/03/2023Remise sur volume | 4.58 € Prix spécial *Prix unitaire/configuration de base En promotion jusqu’au 31/03/2023Remise sur volume | 14.18 € *Prix unitaire/configuration de base | 15.46 € *Prix unitaire/configuration de base | 10.30 € *Prix unitaire/configuration de base | 8.74 € *Prix unitaire/configuration de base | 12.61 € *Prix unitaire/configuration de base | 12.35 € Prix spécial *Prix unitaire/configuration de base En promotion jusqu’au 31/03/2023Remise sur volume | 5.15 € *Prix unitaire/configuration de base | 7.35 € *Prix unitaire/configuration de base | 11.37 € Prix spécial *Prix unitaire/configuration de base En promotion jusqu’au 31/03/2023Remise sur volume | 9.42 € Prix spécial *Prix unitaire/configuration de base En promotion jusqu’au 31/03/2023Remise sur volume | 13.35 € *Prix unitaire/configuration de base | 11.21 € *Prix unitaire/configuration de base | 4.39 € *Prix unitaire/configuration de base | 10.33 € *Prix unitaire/configuration de base Remise sur volume | 11.00 € *Prix unitaire/configuration de base Remise sur volume | 11.74 € *Prix unitaire/configuration de base Remise sur volume | 1.51 € *Prix unitaire/configuration de base | 1.32 € *Prix unitaire/configuration de base | 0.77 € *Prix unitaire/configuration de base Remise sur volume | 5.15 € *Prix unitaire/configuration de base | 4.58 € *Prix unitaire/configuration de base | 6.15 € *Prix unitaire/configuration de base | 2.12 € *Prix unitaire/configuration de base | 2.03 € *Prix unitaire/configuration de base | 2.70 € *Prix unitaire/configuration de base | 3.78 € *Prix unitaire/configuration de base | 6.97 € *Prix unitaire/configuration de base | 7.83 € *Prix unitaire/configuration de base | 3.35 € *Prix unitaire/configuration de base | 4.51 € *Prix unitaire/configuration de base | 4.13 € *Prix unitaire/configuration de base | 0.94 € *Prix unitaire/configuration de base | 10.48 € *Prix unitaire/configuration de base Remise sur volume | 4.68 € *Prix unitaire/configuration de base Remise sur volume | 2.79 € Prix spécial *Prix unitaire/configuration de base En promotion jusqu’au 31/03/2023Remise sur volume | 20.75 € *Prix unitaire/configuration de base Remise sur volume |
Délai d'expédition minimum | 6 jours | 8 jours | Jour même | 6 jours | 10 jours | 6 jours | 6 jours | Jour même | Jour même | 8 jours | 6 jours | 6 jours | 7 jours | 6 jours | Jour même | 6 jours | 7 jours | Jour même | Jour même | 6 jours | 6 jours | 7 jours | 6 jours | Jour même | Jour même | 6 jours | 6 jours | 6 jours | 7 jours | 6 jours | 8 jours | 7 jours | 7 jours | 7 jours | 7 jours | 6 jours | 10 jours | 6 jours | 6 jours | 6 jours | 6 jours | 7 jours | 7 jours | Jour même | 7 jours |
Loading...
Aidez-nous à améliorer notre site.
Donnez-nous votre avis sur le catalogue en ligne MISUMI.
Merci pour votre coopération.
Veuillez s'il vous plaît utiliser le formulaire si vous souhaitez obtenir une réponse rapide de notre part.