?* À propos du délai d'expédition

• 

  Steel / Stainless Steel Louver (Small)【2 pièces par conditionnement】

  MISUMI

  12 cm fan can be mounted

  • Remise sur volume

  • Steel
  • Stainless Steel

  CAD ：

  2D

  à partir de∗ ：	44.39 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Round Louver (Resin)

  MISUMI

  Resin round louver with filter

  • Remise sur volume

  CAD ：

  2D

  à partir de∗ ：	13.56 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Galerie de ventilation à ailettes intégrées (type étanche aux jets d'eau), IP45

  SHINOHARA ELECTRIC

  Use for ventilating operation boards, control panels, and cubicles. Large opening size.
  
  [Features]
  · Can secure an opening area of 148 cm2 using outdoor specifications for attaching blow prevention covers.
  · Significant labor savings are possible because, just as in the past, there is no need to put a vent in the panel.
  · Also, a breathing hole can easily be added.
  · Combines the rear gallery with anti-blow-in cover for strong waterproofing that can pass JISC4620/JISC0920 (anti-water jet) testing (IP45).
  · Stainless steel type also available (built to order)

  CAD ：

  2D

  à partir de∗ ：	125.37 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Galerie en aluminium ajourée (type FAG) 1P × 2

  SHINOHARA ELECTRIC

  This aluminum ventilation gallery is designed to enable ventilation of cubicles, switchboards, etc.
  
  [Features]
  - Extra-long galleries can be produced to the customer's specifications.
  - It is not necessary to directly drill conventional ventilation holes into the panel.
  - This free aluminum gallery can be mounted from the rear as a separate component.
  - Ventilation efficiency is high without sacrificing opacity.
  - Light with no risk of rusting.

  à partir de∗ ：	99.83 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Galerie de ventilation (type remplacement du filtre de panneau avant)

  SHINOHARA ELECTRIC

  Can be replaced/maintained from the front panel.
  
  [Features]
  - The filter can be replaced from the front of the gallery, cutting maintenance work.
  - No ventilation hole cutting in the panel required, reducing labor.
  - Easy to add ventilation holes.

  à partir de∗ ：	60.44 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Galeries en plastique de type consolidé (pour utilisation en intérieur)

  SHINOHARA ELECTRIC

  Plastic galleries for control panels and instrument panels. (Plastic)
  
  [Features]
  · Installation is simple.
  · The plastic gallery can be simply installed into the front surface of panels by cutting out the hole dimensions and mounting it from the reverse side by using the attached mounting brackets.
  · The GP-9 can accommodate a 92 sq.mm fan motor. The GP-12 can accommodate a 120 sq.mm fan motor.
  · Dustproof filters can also be easily mounted.
  · By using the plastic gallery fittings (PGJ-12, PGJW-12), the galleries can be connected in duplicate or triplicate (GP-12 only).

  à partir de∗ ：	2.82 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Capot à capuchon rond

  JAPPY

  [Features]
  · A stainless steel outer wall vent for supplying natural ventilation.
  · There are 2 types of designs, one with a round hood and one with a U-shaped hood.
  • You can make a selection based on utilizations with or without insect protection nets or water stops.
  · Material properties include the use of highly corrosion-resistant SUS 304.

  • Remise sur volume

  à partir de∗ ：	9.89 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Steel Louver【2 pièces par conditionnement】

  MISUMI

  Easy Bolt-On Mounting

  • Steel

  CAD ：

  2D

  à partir de∗ ：	49.86 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Control Panel Filter【1-2 pièces par conditionnement】

  MISUMI

  Dirt in filter is obvious. Significantly reduces the time and effort needed for filter replacement

  • Remise sur volume

  à partir de∗ ：	29.54 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Square Louver (Resin)

  MISUMI

  Resin square louver with filter

  • Remise sur volume

  CAD ：

  2D

  à partir de∗ ：	39.32 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Galerie avec capuchon (pour utilisation en extérieur : type FG), IPX4

  SHINOHARA ELECTRIC

  The hood helps it deal with wind and rain.
  
  [Features]
  - The hood mounted to the gallery provides wind and rain protection.
  - Simple installation.
  - Mount by snapping into the panel holes and screwing in the retention frame (retention board) from the underside.
  - Accessories like a blow prevention cover, insect screen and anti-dust filter provide the features needed for your applications.
  - (FG-15, FG-20 only.)
  - Can be included in a set with a salt filter.

  CAD ：

  2D

  à partir de∗ ：	82.74 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Petite galerie de ventilation (intérieur)

  SHINOHARA ELECTRIC

  Used for ventilation of indoor control panels, panel boards, etc.
  
  [Features]
  · Can be installed directly on panels as before, with no hole drilling required.
  · Ventilation galleries can be installed afterward, reducing workload.
  · A 120mm square fan can also be installed (SG1-10-4)

  • Remise sur volume

  CAD ：

  2D

  à partir de∗ ：	20.10 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Galerie de ventilation (spécification de protection contre les dommages causés par le sel) IP4X

  SHINOHARA ELECTRIC

  Use as a ventilation component of a switchboard installed in IP4X coastal areas, etc.

  CAD ：

  2D

  à partir de∗ ：	276.29 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Galerie de ventilation étanche aux jets d'eau (contre les dommages causés par le sel) IP55

  SHINOHARA ELECTRIC

  A ventilation component for a switchboard installed in IP55 coastal areas.
  
  [Features]
  - Low pressure loss (approximately half that of conventional products).
  - Efficiently collects sea salt particles.
  - Long lifespan (more than twice that of conventional products).
  - Even if collected sea salt particles deliquesce from the filter, the pressure loss increases only a little.
  - Deliquesced sea salt particles flow out downstream, ensuring minimal re-entrainment.
  - Superior impact resistance.

  CAD ：

  2D

  à partir de∗ ：	440.68 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Galerie anti-projection d'eau (capot en plastique), IP45

  SHINOHARA ELECTRIC

  For ventilating cubicles and switchboards installed in harsh outdoor conditions. The protective plastic cover keeps the unit lightweight.
  
  [Features]
  - The plastic-resin rear anti-pull-in cover reduces weight and improves workability.
  - No paint required for the anti-pull-in cover, reducing costs.
  - Strong waterproofing that can pass JISC4620/JISC0920 anti-water jet testing (IP45).

  • Remise sur volume

  CAD ：

  2D

  à partir de∗ ：	84.24 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Galerie avec ventilateur (acier inoxydable) IP45

  SHINOHARA ELECTRIC

  Gallery with fan that is usable outdoors.
  
  [Features]
  · Has a water repellent filter for a structure with superior waterproofing.
  · Can be mounted to panels with simple hexagonal machining.
  · Set includes fan finger guard and power supply cord.
  · Filter can be washed and reused.
  · Available in beige 5Y7/1 and cream 2.5Y9/1 colors.

  à partir de∗ ：	244.91 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Galerie en plastique, série PC

  SHINOHARA ELECTRIC

  Plastic galleries for control panels and instrument panels. The filter can be replaced from the front panel. (Plastic)
  
  [Features]
  · The task of installing has been streamlined by a simple one-touch mounting to the panel apertures.
  · The superior aesthetic appearance can enhance the commercial value of panels by sequential vertical/horizontal mounting.
  · The filter can be replaced by simply removing the front panel of the gallery.
  · 4.90 sq.mm, 120 sq.mm, and 160 sq.mm fans can be mounted.

  CAD ：

  2D

  à partir de∗ ：	11.22 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Galerie anti-soufflement, IP45

  SHINOHARA ELECTRIC

  Use the blow-in prevention gallery as a ventilation part for cubicles and switchboards in harsh outdoor conditions.
  
  [Features]
  - No ventilation holes need to be cut in large panels.
  - Retrofit this component on installed ventilation galleries.
  - The ventilation gallery and blow-in prevention cover are a single part, making it waterproof up to the JIS C 4602/JIS C 0920 standards (blow-in prevention tests).
  - Stainless steel ventilation galleries also available.

  CAD ：

  2D

  à partir de∗ ：	106.80 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Ouïe d'aération, pour utilisation en extérieur

  KAMEDA DENKI

  Vent for switchboards, control panels, and cubicles. For outdoor use.
  
  [Features]
  · Insertable for simple installation.
  · A ventilation louver is inserted into the notch of the panel and a retention frame is mounted to the back using screws.
  · The rear hood is integrated with the mounting frame, so mounting is simple.
  · Insect screen and dustproof filter can be easily attached by a single knurled nut that has been newly developed, so maintenance and replacement are easy to perform.
  · Large opening area providing a beautiful finish.

  • Remise sur volume

  à partir de∗ ：	92.56 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Fente d'aération série V avec capuchon

  TAKACHI ELECTRONICS ENCLOSURE

  Louver (V) with hood
  
  [Features]
  · Optional part for box ventilation.
  - ABS types (V60, V80) compatible with BCAP and BCAK as well as polycarbonate types (V60S, V80S) compatible with BCPC and BCPK available.
  - Suitable for use with large boxes such as control panels.

  • Remise sur volume

  CAD ：

  2D

  à partir de∗ ：	6.14 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Fente d'aération série V avec capuchon

  BOXCO

  Louver (V) with hood
  
  [Features]
  · Optional part for box ventilation.
  ▪ Suitable not only for the BCAP series, but also when using large boxes such as control panels.

  à partir de∗ ：	7.61 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Fente d'aération à capuchon en U

  JAPPY

  This is a louver which includes a U-shaped hood which prevents the entry of rain water.
  
  [Features]
  · A stainless steel outer wall vent for supplying natural ventilation.
  · There are 2 types of designs, one with a round hood and one with a U-shaped hood.
  · Different models with or without an insect screen and water guard can be selected based on the intended application.
  · Material properties include the use of highly corrosion-resistant SUS 304.

  à partir de∗ ：	13.87 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

Loading...