Nombre de jours d'expédition |
|
---|
?* À propos du délai d'expédition et des prix
HIROSE ELECTRONIC
Connector for board-to-cable, cable-to-cable, and board-to-board connections with 2-mm pitch 1 terminal row. Can use for a wide range of equipment.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.
› Configurer maintenant
|
|
à partir de∗ : | 0.04 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
HIROSE ELECTRONIC
Connector for board-to-cable connection with 3.5mm pitch. Although compact in size, this connector supports 7 maximum amperes, and its inner-lock construction provides a highly reliable connection, ideal for internal power supplies.
[Features]
· Compact type with 3.5mm pitch: A small-size, space-saving power supply connector, with pitch between adjacent contacts set at 3.5 mm, and arranged in a double-row pattern with 5 mm between opposing sides.
· 7A current rating ensured: Despite the compact size of the power supply, 7A current rating is ensured with use of AWG #16 wires (UL/CSA rating is 6A). Box-style header: Twist-resistant due to its box-style construction, enabling complete prevention of insertion errors.
· Equipped with inner-type full lock: An inner-type full lock with a locking section that is not exposed to the outside ensures secure engagement for a high level of safety.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.
› Configurer maintenant
|
|
à partir de∗ : | 5.26 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
HIROSE ELECTRONIC
The SUMICON 1600 series of rectangular multi-pin connectors are built using an original Hirose Electric design. These connectors can be used for a variety of different applications based on the combination of connector unit and case employed.
[Features]
· The same nine versions that are available in the 1300 series are available here, with the numbers of pins equal to 8, 12, 16, 20, 24, 28, 34, 45, or 60.
· Connector units are available in soldering, wrapping, or crimping types.
· Available accessories include C cases, CA cases, CBA cases, ST stoppers, STA stoppers, STB stoppers, and others. Combining connectors with these accessories opens up a wide range of possible applications.
› Configurer maintenant
|
|
à partir de∗ : | 1.19 € |
---|---|
Prix spécial | |
Délai d'expédition minimum : | Jour même |
*Prix unitaire/configuration de base
HARTING
This series is even smaller than the Han A series. Saves space, as the connector outer diameter is the same size even if the number of wires increases (Models are separated using "-" rather than spaces).
› Configurer maintenant
|
|
à partir de∗ : | 10.19 € |
---|---|
Prix spécial | |
Délai d'expédition minimum : | Jour même |
*Prix unitaire/configuration de base
HARTING
Available in a wide range of variations in the number of pins. Ideal power source connector for use in harsh environments. Screw connection does not require special tools (Models are separated using "-" rather than spaces).
› Configurer maintenant
|
|
à partir de∗ : | 18.92 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
› Configurer maintenant
|
|
à partir de∗ : | 6.41 € |
---|---|
Délai d'expédition minimum : | Jour même |
*Prix unitaire/configuration de base
HIROSE ELECTRONIC
A board-to-cable, cable-to-cable connector with a lock (2.5-mm pitch). The inner locking type mechanism prevents the connector from disconnecting due to impact.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.
› Configurer maintenant
|
|
à partir de∗ : | 0.24 € |
---|---|
Prix spécial | |
Délai d'expédition minimum : | Jour même |
*Prix unitaire/configuration de base
HIROSE ELECTRONIC
Connector with lock for board-to-cable connection, with 5-mm pitch. Supports 8 maximum amperes. · Supports potting, and is ideal for connecting internal power supplies in equipment.
[Features]
· Potting is supported: Enables potting up to 9 mm, and is low-profile with a mounting height of 22.5 mm.
· Prevents incorrect insertion: A complete prevention mechanism guards against reverse entry and insertion into opposite poles during the coupling of pin headers and sockets.
· Solder cracking protection: Glass-fiber reinforced resin is utilized for the pin header case, as a measure for protecting against solder cracking caused by thermal contraction.
· Prevents reverse entry into board: Added guide posts on pin headers prevent reverse board entry.
· Full lock mechanism: Equipped with an outer-lock type full-lock mechanism.
· 8 A current rating: Can carry a maximum current of 8 Amperes.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.
› Configurer maintenant
|
|
à partir de∗ : | 4.01 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
HIROSE ELECTRONIC
A crimped wire connection type D-sub connector. The cable can be connected to #20–28 AWG (using two types of terminal pins).
[Features]
· Has a metal shell and so is small and lightweight.
· Connector mounting can be performed on the chassis, front or back, or one of the sides.
· The attaching and detaching of the terminals is done by pressing the retainer sideways. Therefore, no special extraction tool is required.
· The insulator uses a UL material synthetic resin with excellent heat-resistant, chemical-resistant properties.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you. Returns and cancellations are not possible. Thank you for your understanding.
› Configurer maintenant
|
|
à partir de∗ : | 2.41 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
ILME
CDD, high density crimped type, 10A / 250V, insert
[Features]
・CDD.
・High density crimped type.
▪ 10A / 250V.
▪ Insert
› Configurer maintenant
|
|
à partir de∗ : | 12.24 € |
---|---|
Prix spécial | |
Délai d'expédition minimum : | Jour même |
*Prix unitaire/configuration de base
ILME
CNE / CSE / CCE, general purpose screw type / spring type / crimped type, 16A / 500V, insert
[Features]
・CNE/CSE/CCE.
・General purpose screw type / spring type / crimped type.
▪ 16A / 500V.
▪ Insert
› Configurer maintenant
|
|
à partir de∗ : | 9.79 € |
---|---|
Prix spécial | |
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
ILME
[Features]
· MIXO.
· MIXO modular inserts and contacts.
· Supports large currents up to 200 A, high voltage up to 5, 000 V, high density, air piping, LANs, and USBs.
· Supports optical fiber, coaxial, and Dsub9Pin connectors.
› Configurer maintenant
|
|
à partir de∗ : | 3.75 € |
---|---|
Prix spécial | |
Délai d'expédition minimum : | Jour même |
*Prix unitaire/configuration de base
OMRON
[Features]
・A discrete wire crimped type has been added to the MIL connector series.
・ The XG5N-U socket with lock, which is unique to Omron, can be inserted and removed with one hand and securely locked.
・ Saves up to 24% (approximately) space (compared to XG4A).
› Configurer maintenant
|
|
à partir de∗ : | 0.79 € |
---|---|
Délai d'expédition minimum : | 7 jours |
*Prix unitaire/configuration de base
MISUMI
Misumi Original Environment Resistant Waterproof Connector
› Configurer maintenant
|
|
à partir de∗ : | 10.62 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
MISUMI
Misumi Original Environment Resistant Waterproof Connector
› Configurer maintenant
|
|
à partir de∗ : | 11.60 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
MISUMI
D Model Connector
› Configurer maintenant
|
|
à partir de∗ : | 16.53 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
WEIDMUELLER
Crimp connection type high-density internal connector (500 V / 16 A / Number of pins 10, 18, 32, 46, 64 (+PE)).
› Configurer maintenant
|
|
à partir de∗ : | 16.97 € |
---|---|
Délai d'expédition minimum : | 4 jours |
*Prix unitaire/configuration de base
WEIDMUELLER
Crimp connection internal connector (250-690 V / 10-40 A / Number of pins 5, 7, 8, 4+2, 17 (+ PE)).
› Configurer maintenant
|
|
à partir de∗ : | 5.89 € |
---|---|
Délai d'expédition minimum : | 5 jours |
*Prix unitaire/configuration de base
HONDA TSUSHIN KOGYO
Housing for the MRP series.
[Features]
· Dual screw and a spring lock mechanism that can withstand any shock.
· Dust-proof mechanism with excellent environmental resistance.
· Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
· A relay type case is also provided
› Configurer maintenant
|
|
à partir de∗ : | 1.94 € |
---|---|
Prix spécial | |
Délai d'expédition minimum : | Jour même |
*Prix unitaire/configuration de base
HIROSE ELECTRONIC
Connector for board-to-cable connection with 1.25-mm pitch. Choose from a number of variations from 2–40 pin, straight-mount, right-angle mount, DIP, and SMT.
[Features]
· Small.
· A low-profile design with a mounting height of 5.8 mm. (The SMT mounting is a straight type, the DIP type is a straight 5.3-mm, and the right-angle type is 3.6-mm.)
· Multipole
· The dual-row type is a multipole connector with up to 40 pins. It is a high-density connector with a surface area of 30% compared to the single-row type.
· Supports automatic mounting.
· The header is available with a suction surface that supports vacuum suction . Therefore, automatic mounting using embossed packing is possible.
· Complete basic functionality despite compact form factor.
· The header includes a box structure to prevent twisting and ensure incorrect insertion is completely prevented.
· Additionally, the Surface Mount (SMT) header is fitted with a reinforcement bracket to prevent solder from peeling.
In-stock made-to-order products cannot be returned or canceled. Thank you for your understanding.
› Configurer maintenant
|
|
à partir de∗ : | 0.12 € |
---|---|
Délai d'expédition minimum : | Jour même |
*Prix unitaire/configuration de base
HIROSE ELECTRONIC
Connector for board-to-cable connection with 1.25-mm pitch. A low-profile type with a lower circuit board mounting height.
[Features]
· Thin type.
· A dedicated right-angle connector to achieve a low-profile on top of circuit boards.
· Circuit board mounting height: 2.5 mm.
· This makes it possible to draw signals from places where there is no space between the circuit boards.
· In addition, the profile of the offset type is lower than the board mounting height of 1.6 mm.
· Supports automatic mounting.
· The header has a vacuum absorption surface. Therefore, automatic mounting by embossed packing is possible.
· Additionally, magazine packing is also available for the on-board type.
· Four-walled type prevents socket from scraping the circuit board.
· Header includes a box structure to prevent twisting to ensure incorrect insertion is completely prevented. Circuit board also includes walls to prevent damage caused by scraping when performing insertion and removal from the socket.
· Additionally, a reinforcement bracket is included to prevent solder from peeling.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.
› Configurer maintenant
|
|
à partir de∗ : | 10.93 € |
---|---|
Délai d'expédition minimum : | 7 jours |
*Prix unitaire/configuration de base
HIROSE ELECTRONIC
A thin, 1-mm pitch, board-to-cable/FPC/thin coaxial cable connector. Available in a wide array of variations for circuit boards and cables.
In-stock custom products cannot be returned or canceled. Thank you.
› Configurer maintenant
|
|
à partir de∗ : | 0.13 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
HIROSE ELECTRONIC
[Features]
· This is a board-to-cable connector with dual-row, 1-mm pitch terminal pins.
· Contributing to a high-density board mounting.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.
› Configurer maintenant
|
|
à partir de∗ : | 11.91 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
HIROSE ELECTRONIC
A connector for 2.5-mm pitch discrete wire connections. Thin type for right-angle mounting at a height of 4.8 mm. Includes mechanism for total locking and mis-insertion prevention.
[Features]
・Including total lock mechanism: total lock mechanism refers to the process of first releasing the lock on both sides before being able to remove the connector. This is effective in preventing accidental disconnection due cable pulling and other mistakes.
・Thin type: mount height when used at a right angle: 4.8 mm.
・Construction that prevents mis-insertion: Mis-insertion is prevented by the thin-type mechanism.
・Tin and gold plating variations: With the 2 options of tin and gold, the ideal metal may be selected depending on intended use.
・Further, there are settings available to provide a light feel even if tin plating is used.
› Configurer maintenant
|
|
à partir de∗ : | 0.09 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
HIROSE ELECTRONIC
Connector for board-to-cable and cable-to-cable connections with 2.5-mm pitch. A wide variety of offerings, including choices in PCB mounting orientation, terminal arrangements, and terminal plating.
[Features]
· A new approach to contact pressure welding and crimping: A new type of connector where the contact-pressure-welded terminal is inserted into the casing.
· By combined use of insulation displacement terminals and crimp terminals, wires with different current ratings can coexist within the same case.
· Terminals can be replaced after wires are connected, allowing ease of maintenance.
· Since the insulation displacement area is protected by the housing, a high level of reliability is ensured.
· Insulation displacement can be performed simply by replacing the applicator of a conventional crimp machine, so no expensive insulation displacement machine is required.
· Headers support potting: A header with increased height to support potting of the board for waterproofing (via resin filling) is available.
· A wide variety of offerings: Each of the "board-to-board" and "relay" series offers both single-row and double-row terminal arrangements, as well as tin and gold standard plating.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.
› Configurer maintenant
|
|
à partir de∗ : | 0.02 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
HIROSE ELECTRONIC
Connector for direct board-to-cable connection with 2-mm pitch. By directly attaching the terminal insertion socket into the circuit board, the header cost can be minimized.
[Features]
・Minimizes header cost: using a dual insertion-removal socket and directly attached connector terminal harness, both circuit boards can have their separate functions used as-is, reducing the required number of headers for a dual terminal socket harness from 2 to 1.
・Small type/multi-pin: a wide range of small types with a number of pins.
・Circuit board mounting height: 4.3 mm (1 crimp attachment array), maximum pin number: 32 (2 crimp attachment arrays).
・Temporary circuit board fastening mechanism: Connector can be temporarily affixed to the circuit board in order to make insertion easier.
› Configurer maintenant
|
|
à partir de∗ : | 0.04 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
HIROSE ELECTRONIC
Connector for board-to-cable, cable-to-cable, and board-to-board connections with 2-mm pitch 2 terminal row. Can use for a wide range of equipment.
[Features]
· On-board improved space saving: The terminal pinout has been condensed into a 2-mm dual-row within a 5-mm width.
· Twice the number of signals can be acquired within the same space as a conventional 2-mm single-row connector.
· A wide array of variations: Crimped and pressure weld wiring connections are available in board-to-cable/relay/board-to-board connector types for expanding the scope of circuit board design.
· In addition, you can choose from gold/tin plating as well as versions which support SMT depending on the target application.
· Covers a broad range of compatible wiring: A 2 mm, dual-row compact design covers a range of compatible wiring from #22-30 AWG.
· Pressure welded labor-saving wire connection: By using fully automated pressure welding equipment, wire connections can be performed easily, including complex multi-harnesses (branched wiring connections), reducing the number of man-hours and eliminating manual processes.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.
› Configurer maintenant
|
|
à partir de∗ : | 0.06 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
HIROSE ELECTRONIC
It is compact and also supports up to 5 A. With its locking mechanism, mis-connection prevention structure, potting compatibility and high reliability, it is optimal for internal power supply connection in equipment.
› Configurer maintenant
|
|
à partir de∗ : | 8.14 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
HIROSE ELECTRONIC
Connector compatible with thick wire (AWG#18 - 22) for direct board-to-cable connection with 3.96-mm pitch. By lumping together and making into contacts, solder work is made possible and efficiency is increased.
[Features]
・Work efficiency is increased.
· By making prior thick wires one-by-one into a connector directly attached to the circuit board, lumping them together allows for a product that can be soldered.
· Intended to increase the efficiency of solder work.
· Small.
· Miniaturization is carried out with an eye on thick wires.
· Circuit board mounting height: 7.5mm.
· Width dimension: 5.0 mm.
· Temporary circuit board fastening mechanism.
・Connector can be temporarily affixed to the circuit board in order to make insertion easier.
› Configurer maintenant
|
|
à partir de∗ : | 0.73 € |
---|---|
Délai d'expédition minimum : | 7 jours |
*Prix unitaire/configuration de base
HIROSE ELECTRONIC
This is a MIL standard-compliant ribbon cable connector HIF3B series crimped socket cover case.
› Configurer maintenant
|
|
à partir de∗ : | 3.45 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
HIROSE ELECTRONIC
A shielded connector supporting LVDS transmission. A common board connector that can be selected with a discrete cable, a thin coaxial cable, or a shielded FCC.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.
› Configurer maintenant
|
|
à partir de∗ : | 1.13 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
HIROSE ELECTRONIC
MIL Standard-compliant ribbon cable connector. A wide variety are available and are used broadly in numerous types of devices and equipment.
[Features]
· MIL Standard-compliant: The HIF3B Series was developed as a MIL standard-compliant product, and is used for a broad range of purposes.
· Compatible with the HIF3 Series.
· UL certified product: The HIF3B Series is UL-certified as a connector.
· Mechanism for preventing incorrect insertion: Guiding method (MIL Standard) where guide keys are inserted in the pin header-side to create convex parts, which are fitted with the concave parts of sockets.
· Guiding is achieved via insertion of a polarizing key into the socket hole.
· Guiding achieved by fitting a convex element on the socket-side (HIF3A type) with a slot in the center of the pin-header side.
· Compatible wire AWG #28: Compatible wiring corresponds to
Some in-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.
› Configurer maintenant
|
|
à partir de∗ : | 0.14 € |
---|---|
Prix spécial | |
Délai d'expédition minimum : | Jour même |
*Prix unitaire/configuration de base
HIROSE ELECTRONIC
These are DeviceNet standard compliant connectors. These connectors simplify connection, reduce plug connector size, and promote differentiation compared to conventional parts.
[Features]
· DeviceNet compliant: The HR31 series is a FA network device standards product. (Terminal contacts: Gold-plated)
· Screw-lock: All screw-lock equipped products can be securely locked, allowing for increased locking strength.
· Snap-lock: The snap-lock feature creates a tactile click when mating.
· Commercially available tools can be used: These connectors are designed to be used with crimp tools conforming to JIS C 9711 standards.
· Designed to allow for removal by ⌀1 mm pin when improperly wired.
· Protected contacts: The crimped contacts are protected by the plug housing, reducing damage to the contacts during connection.
› Configurer maintenant
|
|
à partir de∗ : | 1.10 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
HIROSE ELECTRONIC
Compact, high-density mounted, rectangular multipole rack/panel plug-in connector QR/P. Compact crimp terminals divided into power supply and signal use.
[Features]
· The terminals have smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
· The terminals are made compact by segregating according to those for power and those for signals.
· The housing internal pinout has pin 12 opposing pin 2 on one side, pins 8, 24 opposing pin 2 on both sides (total: 4 pins), and pin 32 opposing pin 3 on one side (total: 6 pins) with a greater distance of separation from other pins. These terminal pins feature a creepage distance that can adequately withstand high voltages. Therefore, the terminals can be used as power supply terminals.
· Additionally, a flame retardant material (UL9V-0) is used for the insulating material.
· Guide pins are metallic to withstand coupling impact.
· Installation to a panel or rack is achieved via a floating bush. Therefore, insertion and removal do not require the application of excessive force.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.
› Configurer maintenant
|
|
à partir de∗ : | 0.26 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
HIROSE ELECTRONIC
• Compared to the QR/P4 Series products with the same number of cores, dimensions are decreased by 20% through the use of a rectangular plug-in connection and multipolar rack and panel connector. • A terminal for power supplies with 2 poles on both sides is set up in a reinforced area of the guide pin of the housing.
[Features]
• Compared to conventional QR/P4 Series products with the same number of cores, these models have a small size width approximately 20% narrower.
• By positioning both sides of the 2-pole structure in the reinforced area of the guide pin of the housing, the design uses 5.3-mm pitches for a small size that is also durable enough to withstand high voltage, and can be used for power supplies.
• In addition, terminals for signals are positioned with a 2-mm pitch.
• The terminal for power supplies with 2 poles on both ends features holes that can be used for wire connections with AWG #20 - #24 wires.
• Other terminals for signals have holes that can be used for wire connections with AWG #24 - #28 wires.
· The terminals have stable contact pressure through point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
• The small design features guide pins and insulation joined in a single body shape.
• Mounting to the panel or the rack uses a stepped screw system to fix the product in a floating place, allowing for comfortable insertion and removal operations.
• This product has obtained UL, CSA, and TUV certifications.
› Configurer maintenant
|
|
à partir de∗ : | 0.12 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
HIROSE ELECTRONIC
Plug-in connection rack/panel connector. Connects and disconnects the power supply and signal circuit between the unit and the rack. Crimp terminals have a shared ribbon shape form for both male and female models.
[Features]
· The terminals have a smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
• Through the utilization of a shared form for male and female terminals, wire connections have improved workability and the terminals themselves have some flexibility.
• For each number of pins, the terminal position inside the housing puts some distance between the other terminals at the 2 opposite pins on both sides (4 pins total), and this distance ensure sufficient durability to withstand high voltage, so these products can be used for power supplies.
• In addition, the insulation is a flame retardant material (UL9V-0).
• Guide pins are made of metal for the durability to withstand coupling shocks.
• Products mount to the panel or rack fixed in place through a floating bushing system, allowing for comfortable insertion and removal operations.
› Configurer maintenant
|
|
à partir de∗ : | 0.40 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
HIROSE ELECTRONIC
This is a board-to-cable connector for a circuit board with high voltage resistance that corresponds to 3,000 V and has a lock included. One-push connection operation is available for improved mating operability.
[Features]
• Connector mating in just one push: Through the utilization of an inertia lock, mating work can be performed easily and with certainty in just one push.
• This also prevents accidents resulting from partial mating.
• Improved workability through vertical mating: Vertical mating and horizontal cable pulling improve workability in the field. drawer allows improved working in the field.
• Also, the mating surface has a large guiding area to make insert operations easier to perform.
• Designed with high voltage in mind: In addition to the terminal pitch, the design accumulates a large side surface distance, retaining performance in a high voltage environment.
• Header connector uplift prevention: Through solder connections to a total of 4 areas, the header side housing is fixed firmly in place, preventing and uplift from occurring.
• Solder implementation for uplift prevention: As a solder implementation method for preventing uplift, a kink structure is included in the terminals (P = 12 mm products only).
• UL, C-UL, and TUV certified products: Those products have obtained safety standard qualifications as connectors (P = 12 mm products only).
› Configurer maintenant
|
|
à partir de∗ : | 11.07 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
HIROSE ELECTRONIC
This small, multi-pin rectangular connector was developed to support the miniaturization of electronic devices, and thinner devices in particular
[Features]
· The terminal's wire connector is arrayed in a 2.54 mm grid that makes it easy to design circuits on a printed circuit board.
· The structure of the terminal is based on the manufacturer's SM series (D-sub connectors). This gives the terminal dependable quality.
· The single-action lock mechanism provides excellent operability.
· The cover case is designed to be thin and compact and features a low profile in order to meet the needs of high-density mounting. Mounting with 17.78 mm (700 mils) between circuit boards is possible.
· The cover case is made of an aluminum die casting offering good electromagnetic shielding characteristics. Combined with the connector's metal shell, the above configuration ensures that noise is reduced.
· The dip connector includes a snap (circuit board temporary joint) bracket.
· Pressure Connecting type supports connection of two wire types, AWG 26 and 28, via pressure welding, for use with standard 1.27-mm pitch cables.
· Crimping type can be used to perform crimping of AWG 26 to 28 wiring.
· Depending on the application, cable can be extracted in either the vertical or horizontal direction.
› Configurer maintenant
|
|
à partir de∗ : | 3.35 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
HARTING
Available in a wide range of variations in the number of pins. Ideal power source connector for use in harsh environments. Crimp connection for reliable connection (Models are separated using "-" rather than spaces).
› Configurer maintenant
|
|
à partir de∗ : | 5.20 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
HARTING
It is possible to save space used by connectors by selecting the modules to suit the operating environment (Models are separated using "-" rather than spaces).
› Configurer maintenant
|
|
à partir de∗ : | 9.44 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
MOLEX
A Molex 2.0 mm pitch connector for external relay connection.
› Configurer maintenant
|
|
à partir de∗ : | 7.50 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
ILME
CD, general purpose crimped type, 10A / 50 - 250 V, Insert
[Features]
・CD general purpose crimped type.
・10A/50 - 250V.
▪ Insert
› Configurer maintenant
|
|
à partir de∗ : | 3.44 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
ILME
CDA/CDC, Common use screw type and crimp type, 16A / 250V, insert
[Features]
・CDA/CDC.
・General-use screw type, crimp type.
▪ 16A / 250V insert
› Configurer maintenant
|
|
à partir de∗ : | 17.20 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
ILME
CQE, general purpose crimped type, 16A / 500V, insert
[Features]
・CQ.
・E general purpose crimp type.
▪ 16A / 500V insert
› Configurer maintenant
|
|
à partir de∗ : | 14.18 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
ILME
CX, high current-compatible, compound type, 80A/690V, insert
[Features]
・Compound CX compatible with high currents.
▪ 80A/690V.
▪ Insert
› Configurer maintenant
|
|
à partir de∗ : | 17.10 € |
---|---|
Prix spécial | |
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
Marque |
---|
Série du produit |
CAD |
à partir de∗ |
Délai d'expédition minimum |
Spécifications |
Connector Shape |
A· B· C |
D· E· F |
G·H·I |
J·K·L |
M·N·O |
P· Q· R |
S· T· U |
Number |
Applicable pin/contact |
Number Of Cores |
Application |
Allowable Current(A) |
Allowable Voltage(V) |
Wire connection method |
Connection direction |
Protection function (environmentally resistant) |
Representative Standard |
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||
Marque | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HARTING | HARTING | ILME | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | ILME | ILME | ILME | OMRON | MISUMI | MISUMI | MISUMI | WEIDMUELLER | WEIDMUELLER | HONDA TSUSHIN KOGYO | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HARTING | HARTING | MOLEX | ILME | ILME | ILME | ILME |
Série du produit | Connecteur carré multibroche (SUMICON) série 1600【1-100 pièces par conditionnement】 | Connecteur Han série E / EE (connexion de câble de type à vis / sertie) | Connecteur D-Sub (type de connexion de câble sertie) - série CD【1-100 pièces par conditionnement】 | Douille à sertir à fils discrets - XG5 (douille à sertir à fils discrets) | Misumi, Waterproof, E-Model Connector (Crimp Wire Connection) | Misumi, Waterproof, DD-Model Connector (Crimp Wire Connection) | Connecteur circuit imprimé à câble avec verrou latéral, pas de 2.5mm, série HNC | Connecteur circuit imprimé à câble intégré avec pas de 2mm, série DF4 | Connecteur intégré circuit imprimé à câble avec pas de 3.96mm, série DF6 | Connecteur circuit imprimé à câble (pas de 1mm) avec prise en charge de LVDS - série FX15 | Connecteur de câble ruban conforme à la norme MIL - série HIF3B【1-100 pièces par conditionnement】 | Connecteur pour rack et panneau série QR / P1【1-100 pièces par conditionnement】 | Connecteur pour rack et panneau, série QR / P【1-100 pièces par conditionnement】 | Série Han-Modulaire : Divers modules【2 pièces par conditionnement】 | Insert CDA / CDC à usage courant, type à visser et typer à sertir, 16A / 250V | ||||||||||||||||||||||||||||||
CAD |
|
|
| ||||||||||||||||||||||||||||||||||||||||||
à partir de∗ | 0.04 € *Prix unitaire/configuration de base Remise sur volume | 5.26 € *Prix unitaire/configuration de base Remise sur volume | 1.19 € Prix spécial *Prix unitaire/configuration de base En promotion jusqu’au 30/06/2023Remise sur volume | 10.19 € Prix spécial *Prix unitaire/configuration de base En promotion jusqu’au 30/06/2023Remise sur volume | 18.92 € *Prix unitaire/configuration de base Remise sur volume | 6.41 € *Prix unitaire/configuration de base Remise sur volume | 0.24 € Prix spécial *Prix unitaire/configuration de base En promotion jusqu’au 30/06/2023Remise sur volume | 4.01 € *Prix unitaire/configuration de base Remise sur volume | 2.41 € *Prix unitaire/configuration de base Remise sur volume | 12.24 € Prix spécial *Prix unitaire/configuration de base En promotion jusqu’au 30/06/2023Remise sur volume | 9.79 € Prix spécial *Prix unitaire/configuration de base En promotion jusqu’au 30/06/2023Remise sur volume | 3.75 € Prix spécial *Prix unitaire/configuration de base En promotion jusqu’au 30/06/2023Remise sur volume | 0.79 € *Prix unitaire/configuration de base Remise sur volume | 10.62 € *Prix unitaire/configuration de base Remise sur volume | 11.60 € *Prix unitaire/configuration de base Remise sur volume | 16.53 € *Prix unitaire/configuration de base Remise sur volume | 16.97 € *Prix unitaire/configuration de base | 5.89 € *Prix unitaire/configuration de base | 1.94 € Prix spécial *Prix unitaire/configuration de base En promotion jusqu’au 30/06/2023Remise sur volume | 0.12 € *Prix unitaire/configuration de base Remise sur volume | 10.93 € *Prix unitaire/configuration de base Remise sur volume | 0.13 € *Prix unitaire/configuration de base Remise sur volume | 11.91 € *Prix unitaire/configuration de base Remise sur volume | 0.09 € *Prix unitaire/configuration de base Remise sur volume | 0.02 € *Prix unitaire/configuration de base Remise sur volume | 0.04 € *Prix unitaire/configuration de base Remise sur volume | 0.06 € *Prix unitaire/configuration de base Remise sur volume | 8.14 € *Prix unitaire/configuration de base Remise sur volume | 0.73 € *Prix unitaire/configuration de base Remise sur volume | 3.45 € *Prix unitaire/configuration de base Remise sur volume | 1.13 € *Prix unitaire/configuration de base Remise sur volume | 0.14 € Prix spécial *Prix unitaire/configuration de base En promotion jusqu’au 30/06/2023Remise sur volume | 1.10 € *Prix unitaire/configuration de base Remise sur volume | 0.26 € *Prix unitaire/configuration de base Remise sur volume | 0.12 € *Prix unitaire/configuration de base Remise sur volume | 0.40 € *Prix unitaire/configuration de base Remise sur volume | 11.07 € *Prix unitaire/configuration de base Remise sur volume | 3.35 € *Prix unitaire/configuration de base Remise sur volume | 5.20 € *Prix unitaire/configuration de base Remise sur volume | 9.44 € *Prix unitaire/configuration de base Remise sur volume | 7.50 € *Prix unitaire/configuration de base Remise sur volume | 3.44 € *Prix unitaire/configuration de base Remise sur volume | 17.20 € *Prix unitaire/configuration de base Remise sur volume | 14.18 € *Prix unitaire/configuration de base Remise sur volume | 17.10 € Prix spécial *Prix unitaire/configuration de base En promotion jusqu’au 30/06/2023Remise sur volume |
Délai d'expédition minimum | 6 jours | 6 jours | Jour même | Jour même | 6 jours | Jour même | Jour même | 6 jours | 6 jours | Jour même | 6 jours | Jour même | 7 jours | 6 jours | 6 jours | 6 jours | 4 jours | 5 jours | Jour même | Jour même | 7 jours | 6 jours | 6 jours | 6 jours | 6 jours | 6 jours | 6 jours | 6 jours | 7 jours | 6 jours | 6 jours | Jour même | 6 jours | 6 jours | 6 jours | 6 jours | 6 jours | 6 jours | 6 jours | 6 jours | 6 jours | 6 jours | 6 jours | 6 jours | 6 jours |
Spécifications |
|
|
| ||||||||||||||||||||||||||||||||||||||||||
Connector Shape | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée | Forme carrée |
A· B· C | - | - | - | - | - | - | - | - | Autre | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
D· E· F | Autre | - | - | - | - | - | Autre | Autre | Dsub | - | - | - | - | - | - | - | - | - | - | Autre | Autre | Autre | Autre | - | Autre | Autre | Autre | Autre | Autre | - | Autre | - | - | - | - | - | - | Autre | - | - | - | - | - | - | - |
G·H·I | - | - | - | Usage intensif | Usage intensif | - | - | - | - | - | - | - | - | Usage intensif | Usage intensif | Usage intensif | Autre | Autre | - | - | - | - | - | Autre | - | - | - | - | - | Autre | - | Autre | Autre | - | - | - | - | - | Usage intensif | Usage intensif | - | - | - | - | - |
J·K·L | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
M·N·O | - | Autre | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | MR | - | - | - | - | - | - | - | - | - | - | - | - | MIL | - | - | - | - | Autre | - | - | - | - | - | - | - | - |
P· Q· R | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Autre | Autre | Autre | - | - | - | - | - | - | - | - | - |
S· T· U | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Number | - | - | Autre | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Applicable pin/contact | Mâle (fiche) / Femelle (prise) | Femelle (prise) | Mâle (fiche) / Femelle (prise) | Mâle (fiche) / Femelle (prise) | Mâle (fiche) / Femelle (prise) | Mâle (fiche) / Femelle (prise) | Mâle (fiche) / Femelle (prise) | Femelle (prise) | Mâle (fiche) / Femelle (prise) | Mâle (fiche) / Femelle (prise) | Mâle (fiche) / Femelle (prise) | Mâle (fiche) / Femelle (prise) | Femelle (prise) | Mâle (fiche) / Femelle (prise) | Mâle (fiche) / Femelle (prise) | Mâle (fiche) | Mâle (fiche) / Femelle (prise) | Femelle (prise) | Mâle (fiche) / Femelle (prise) | Femelle (prise) | Femelle (prise) | Femelle (prise) | Femelle (prise) | Femelle (prise) | Mâle (fiche) / Femelle (prise) | Mâle (fiche) | Mâle (fiche) / Femelle (prise) | Femelle (prise) | Mâle (fiche) | - | Mâle (fiche) | Femelle (prise) | Femelle (prise) | Mâle (fiche) / Femelle (prise) | Mâle (fiche) / Femelle (prise) | Mâle (fiche) / Femelle (prise) / Utilisation combinée mâle / femelle | Femelle (prise) | Mâle (fiche) | Mâle (fiche) / Femelle (prise) | - | Mâle (fiche) / Femelle (prise) | Mâle (fiche) / Femelle (prise) | Mâle (fiche) / Femelle (prise) | Mâle (fiche) / Femelle (prise) | Mâle (fiche) / Femelle (prise) |
Number Of Cores | 2 ~ 15 | - | 12 ~ 16 | 5 ~ 12 | 10 ~ 46 | 5 ~ 12 | 2 ~ 15 | - | 9 ~ 37 | 38 ~ 108 | 6 ~ 48 | 1 ~ 25 | 10 ~ 64 | 6 ~ 24 | 24 ~ 72 | 25 | 32 ~ 46 | 5 | 8 ~ 50 | 2 ~ 40 | 3 ~ 10 | 8 ~ 20 | 10 ~ 50 | 2 ~ 15 | - | - | 4 ~ 32 | - | - | 20 ~ 60 | 31 ~ 51 | 10 ~ 64 | 5 | 12 ~ 32 | 8 ~ 12 | 4 ~ 24 | 2 | 26 | 7 ~ 108 | 6 ~ 17 | 6 | 7 ~ 64 | 10 ~ 32 | 64 ~ 92 | 14 ~ 42 |
Application | Connexion de câble | - | Connexion de câble | Connexion de câble | Connexion de câble | Connexion de câble | Connexion de câble / Montage sur panneau | - | Connexion de câble | Connexion de câble | Connexion de câble | Connexion de câble | Connexion de câble | Connexion de câble | Connexion de câble | Connexion de câble | - | - | Montage sur panneau | Connexion de câble | Connexion de câble | Connexion de câble | Connexion de câble | Connexion de câble | Connexion de câble | Pour PCB | Connexion de câble | - | - | - | Connexion de câble | Connexion de câble | Connexion de câble | Montage sur panneau / Autre | Montage sur panneau | Montage sur panneau / Autre | Connexion de câble | Connexion de câble | Connexion de câble | Connexion de câble | Connexion de câble | Connexion de câble | Connexion de câble | Connexion de câble | Connexion de câble |
Allowable Current(A) | 3 | 5 ~ 7 | 3 | 10 ~ 16 | 16 | 10 ~ 40 | 1 ~ 3 | 8 | 3 | 10 | 16 | 4 ~ 200 | 3 | 16 | 10 | 10 | 16 | 16 | 3 | 1 | 1 | 1 | 1 | 3 | 0.5 ~ 3 | 3 | 0.5 ~ 2 | 5 | 5 | - | 0.5 | 1 ~ 3 | 10 ~ 12 | 3 ~ 13 | 2 ~ 3 | 7 ~ 13 | 1 | 3 | 10 | 10 ~ 16 | 1.5 | 10 | 16 | 16 | 16 ~ 40 |
Allowable Voltage(V) | CA250 | AC300 | - | 230 ~ 600 | 500 ~ 600 | 400 ~ 690 | CA250 | CA / CC 500 | 350CA | 250 | 500 | 50 ~ 1000 | CA250 | 500 ~ 600 | 250 ~ 600 | 250 ~ 600 | 500 | 400 | AC300 | AC150 | AC150 | CA100 | CA100 | CA250 | CA250 | CA250 | CA250 | 500 | 300 | - | CA100 | CA200 | CA 250 ~ CC 350 | CA 125 ~ CA 250 | CA 30 ~ CA 300 | CA 250 ~ CA 600 | CA / CC 3000 | CA200 | 250 ~ 600 | 160 ~ 500 | 125 | 50 ~ 250 | 250 | 500 | 400 ~ 690 |
Wire connection method | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti | Serti |
Connection direction | Droit | Droit | Droit | Droit | Droit | Droit | Droit | Droit | Droit | Droit | Droit | Droit | - | Droit | Droit | Droit | Droit | Droit | Droit | Droit | Droit | Droit | Droit | Droit | - | - | Droit | - | Droit | Droit | Droit | Droit | Droit | Droit | Droit | Droit | Angle | Droit | Droit | - | Droit | Droit | Droit | Droit | Droit |
Protection function (environmentally resistant) | - | - | - | Disponible | Disponible | - | - | - | - | - | - | - | - | Disponible | Disponible | Disponible | N/A | N/A | N/A | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Disponible | - | - | - | - | - | - |
Representative Standard | UL / CSA | UL / CSA | - | UL / CSA | UL / CSA | UL / CUL / CCC / CSA | UL / CUL | UL / CUL | - | UL / CCC / CSA | UL / CSA | UL / CUL / CCC / CSA | - | CE / UL | CE / UL | CE / UL / CSA | UL / CSA | - | - | - | - | - | - | - | UL / CSA | - | UL / CSA | - | - | UL | - | UL | - | UL / TUV / CSA | UL / TUV / CSA | UL / TUV / CSA | UL / CUL / TUV | - | CE / UL / CSA | - | - | UL / CCC / CSA | UL / CCC / CSA | UL / CSA | UL / CCC / CSA |
Loading...
Aidez-nous à améliorer notre site.
Donnez-nous votre avis sur le catalogue en ligne MISUMI.
Merci pour votre coopération.
Veuillez s'il vous plaît utiliser le formulaire si vous souhaitez obtenir une réponse rapide de notre part.