?* À propos du délai d'expédition

• 

  Connecteur compatible DeviceNet, série HR31

  Hirose Electronic

  These are DeviceNet standard compliant connectors. These connectors simplify connection, reduce plug connector size, and promote differentiation compared to conventional parts.
  
  [Features]
  · DeviceNet compliant: The HR31 series is a FA network device standards product. (Terminal contacts: Gold-plated)
  · Screw-lock: All screw-lock equipped products can be securely locked, allowing for increased locking strength.
  · Snap-lock: The snap-lock feature creates a tactile click when mating.
  · Commercially available tools can be used: These connectors are designed to be used with crimp tools conforming to JIS C 9711 standards.
  · Designed to allow for removal by ⌀1 mm pin when improperly wired.
  · Protected contacts: The crimped contacts are protected by the plug housing, reducing damage to the contacts during connection.

  • Remise sur volume

  Sélectionner et comparer

  à partir de∗ ：	1.15 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur multifonction en deux parties, demi-pas, série FX2【1-35 pièces par conditionnement】

  Hirose Electronic

  Combination offers various connections for board-to-board (stacking, horizontal, vertical) and ribbon cable connections.

  • Remise sur volume

  Sélectionner et comparer

  à partir de∗ ：	1.64 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Connecteur d'E/S demi-pas (type original) série DX

  Hirose Electronic

  I/O Connector with a 1.27-mm pitch (Hirose Electric Original Type). A selection of two types of lock methods and abundant variations for wire connection and implementation methods are available.
  
  

  • Remise sur volume

  Sélectionner et comparer

  à partir de∗ ：	4.45 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Connecteur d'E/S demi-pas (type à usage général) série DX*M

  Hirose Electronic

  This is a 1.27-mm pitch I/O connector (general purpose type). A wide variety is available to suit different applications.

  • Remise sur volume

  Sélectionner et comparer

  à partir de∗ ：	2.40 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur pour rack et panneau série QR / P1【1-100 pièces par conditionnement】

  Hirose Electronic

  Compact, high-density mounted, rectangular multipole rack/panel plug-in connector QR/P. Compact crimp terminals divided into power supply and signal use.
  
  [Features]
  · The terminals have smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
  · The terminals are made compact by segregating according to those for power and those for signals.
  · The housing internal pinout has pin 12 opposing pin 2 on one side, pins 8, 24 opposing pin 2 on both sides (total: 4 pins), and pin 32 opposing pin 3 on one side (total: 6 pins) with a greater distance of separation from other pins. These terminal pins feature a creepage distance that can adequately withstand high voltages. Therefore, the terminals can be used as power supply terminals.
  · Additionally, a flame retardant material (UL9V-0) is used for the insulating material.
  · Guide pins are metallic to withstand coupling impact.
  · Installation to a panel or rack is achieved via a floating bush. Therefore, insertion and removal do not require the application of excessive force.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Remise sur volume

  Sélectionner et comparer

  à partir de∗ ：	0.19 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur pour rack et panneau, série QR / P4

  Hirose Electronic

  Rectangular multipolar racks with plug-ins connector/panel connector QR/miniaturization of P1/Implementation of high density. • Small design with the insulation and the guide pin incorporated into a single body shape.
  
  [Features]
  · The terminals have a smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
  · The terminals are made compact by segregating according to those for power and those for signals.
  • The signal terminal pitch inside the housing is 2.54 mm, and the 2 poles on both sides (total: 4 poles) are distributed with 5.08-mm pitches for sufficient durability to withstand high voltage, so these units can be used for power supplies.
  • In addition, the insulation is a flame retardant material (UL9V-0).
  • The small design features guide pins and insulation joined in a single body shape.
  • Mounting to the panel or the rack uses a stepped screw system to fix the product in place, allowing for comfortable insertion and removal operations.
  • The female-type housing uses a mating surface deeper than the contact point for female terminals, for a structure with finger testing (compliant with UL standard 1950) capabilities.
  • This product has obtained UL, CSA, and TUV certifications.

  • Remise sur volume

  Sélectionner et comparer

  à partir de∗ ：	2.65 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur pour rack et panneau, série QR / P6

  Hirose Electronic

  Rectangular multipolar racks with plug-ins connector/panel connector QR/miniaturization of P1/Implementation of high density. • Small design crimp terminals divided for power supplies and signals with guide pins and insulation in a single body shape.
  
  [Features]
  · The terminals have a smooth insertion and removal feel, stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
  · The terminals are made compact by segregating according to those for power and those for signals.
  • The signal terminal pitch inside the housing is 2.54 mm, and the 2 poles opposite each other on one side are distributed with 6.9-mm pitches for sufficient durability to withstand high voltage, so these units can be used for power supplies.
  • In addition, the insulation is a flame retardant material (UL9V-0).
  • The small design features guide pins and insulation joined in a single body shape.
  • Mounting to the panel or the rack uses a stepped screw system to fix the product in place, allowing for comfortable insertion and removal operations.
  • The female-type housing uses a mating surface deeper than the contact point for female terminals, for a structure with finger testing (compliant with UL standard 1950) capabilities.
  • This product has obtained UL, CSA, and TUV certifications.

  • Remise sur volume

  Sélectionner et comparer

  à partir de∗ ：	2.40 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur pour rack et panneau, série QR / P8

  Hirose Electronic

  • Compared to the QR/P4 Series products with the same number of cores, dimensions are decreased by 20% through the use of a rectangular plug-in connection and multipolar rack and panel connector. • A terminal for power supplies with 2 poles on both sides is set up in a reinforced area of the guide pin of the housing.
  
  [Features]
  • Compared to conventional QR/P4 Series products with the same number of cores, these models have a small size width approximately 20% narrower.
  • By positioning both sides of the 2-pole structure in the reinforced area of the guide pin of the housing, the design uses 5.3-mm pitches for a small size that is also durable enough to withstand high voltage, and can be used for power supplies.
  • In addition, terminals for signals are positioned with a 2-mm pitch.
  • The terminal for power supplies with 2 poles on both ends features holes that can be used for wire connections with AWG #20 - #24 wires.
  • Other terminals for signals have holes that can be used for wire connections with AWG #24 - #28 wires.
  · The terminals have stable contact pressure through point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
  • The small design features guide pins and insulation joined in a single body shape.
  • Mounting to the panel or the rack uses a stepped screw system to fix the product in a floating place, allowing for comfortable insertion and removal operations.
  • This product has obtained UL, CSA, and TUV certifications.

  • Remise sur volume

  Sélectionner et comparer

  à partir de∗ ：	0.13 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur d'interface carré miniature avec verrou - série ST

  Hirose Electronic

  While being small in size and low-profile in design with a height of 3 mm, the lock mechanism is powerful in this interface connector. Ideal for use with interfaces of small devices.
  
  [Features]
  · Powerful lock mechanism: The design enables resistance against tensive force of 49 N in vertical and horizontal directions, and in the direction of engagement, while the connector is in a mated state.
  · Protection is ensured even if sudden impact occurs unexpectedly, enabling worry-free use.
  · Prevents reverse entry and diagonal mating: The four upper and lower keys prevent reverse entry and diagonal mating of the connector.
  · If diagonal mating occurs, then the construction ensures protection from contact between the receptacle signal portion and the plug. Thus, this connector is ideal for use with peripherals that require frequent insertion and removal.
  · Ideal for use with interfaces included in small devices: The plug is 8 mm in thickness and 20 mm in length, making it a natural fit for use with small devices.
  · Receptacle is low-profile with a height of 3 mm, and the contact pitch is 0.5 mm. Product can be mounted with a small footprint, helping achieve device miniaturization.
  · Wide variety of offerings: Can be used with various types of peripheral device connections. A broad range of offerings includes a sealed plug for data communication, a non-sealed plug for charging, a reverse plug type which supports mounting, a cradle-type that can be used for cradle equipment, and more.
  · Cable type can be chosen by the user: Plugs are connected via soldering, so cables can be chosen by the user.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Remise sur volume

  Sélectionner et comparer

  à partir de∗ ：	0.75 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur d'interface rectangulaire, petit format, à longue durée de vie, série 3500

  Hirose Electronic

  This small interface connector includes a lock, and has excellent performance, holding up for 20,000 insertion and removal cycles in testing.
  
  [Features]
  • This connector has a long service life and can be inserted and removed up to 20,000 times.
  • The terminal structure has high reliability, and is a 2-point contact bellows type.
  • In response to forceful pulling on the lock, the unit unlocks utilizing the "snap lock method." This makes the connector resistant to damage from outside forces pulling on the cable unexpectedly.
  • By pushing the button on the left or right side of the plug, you can easily unlock the cable, and because there's an audible "clicking" sound when the cable locks in place, you can be absolutely sure that it is locked.
  • Small and lightweight (the 16-core receptacle is approximately 2 g), effective for size and reduction of terminal equipment.
  • The new boxes and metal shell bending structure utilized function as EMI measures, and the connector itself is durable.
  • Just push a button and EDS measures are complete through the utilization of an over-molded plug cover.
  • The circuit board implementation method uses a 0.8-mm pitch row with the SMT method, so implementation is easy.
  • Conforms to circuit board with t values of 0.81 to 1.6 mm, giving users an extensive selection of circuit boards.
  • Two types of wire connection methods on the plug side are available. One is a pressure welded type for wire connection labor reduction, and the other is a solder type with arbitrary cable type selection available.

  • Remise sur volume

  Sélectionner et comparer

  à partir de∗ ：	3.23 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur câble à circuit imprimé série MDF51 pour circuit imprimé à résistance à haute tension (3000V), avec verrou inclus【1-100 pièces par conditionnement】

  Hirose Electronic

  This is a board-to-cable connector for a circuit board with high voltage resistance that corresponds to 3,000 V and has a lock included. One-push connection operation is available for improved mating operability.
  
  [Features]
  • Connector mating in just one push: Through the utilization of an inertia lock, mating work can be performed easily and with certainty in just one push.
  • This also prevents accidents resulting from partial mating.
  • Improved workability through vertical mating: Vertical mating and horizontal cable pulling improve workability in the field. drawer allows improved working in the field.
  • Also, the mating surface has a large guiding area to make insert operations easier to perform.
  • Designed with high voltage in mind: In addition to the terminal pitch, the design accumulates a large side surface distance, retaining performance in a high voltage environment.
  • Header connector uplift prevention: Through solder connections to a total of 4 areas, the header side housing is fixed firmly in place, preventing and uplift from occurring.
  • Solder implementation for uplift prevention: As a solder implementation method for preventing uplift, a kink structure is included in the terminals (P = 12 mm products only).
  • UL, C-UL, and TUV certified products: Those products have obtained safety standard qualifications as connectors (P = 12 mm products only).

  • Remise sur volume

  Sélectionner et comparer

  à partir de∗ ：	0.23 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur pour rack et panneau, petit format, série QR / P15

  Hirose Electronic

  Construction is divided into main connector unit / cable connection portion. 8, 24 (4 pins for power source) and 40-pin configuration.
  
  [Features]
  ・Construction divided into main connector unit / cable connection portion: dividing the main body into main connector unit / cable connection portion parts enables product harness insertion from the back, increasing cable connection harness and set mounting workability.
  ・Sequence structure: the 40-pin type uses 2 pins for both terminals as a sequence terminal, taking safety into full consideration.
  ・Power supply compatibility: The 24-pin type incorporates power source terminal type.
  ・The power supply terminal connection uses MDF6 series 4-pin connectors (3.5-mm pitch, UL and CSA certified). Use of AWG16 ensures a 6A power supply capacity.
  ・Further, it is also possible to crimp using automated machines.
  ・Contact reliability: the main connector body contact portion uses a forked, double contact (tuning fork) shape in an effort to offer more stable contact.

  • Remise sur volume

  Sélectionner et comparer

  à partir de∗ ：	1.84 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur d'interface rectangulaire, petit format, série 3200

  Hirose Electronic

  This is an interface connector with an implementation height of 2.9 mm, a low profile, small size, and a lock included.
  
  [Features]
  • A receptacle connector board implementation surface with a height of the 2.9 mm.
  • The contact pitch is an incredibly small 0.8 mm, and only a small area is required for mounting.
  • This circuit board implementation method has a pitch of just 0.8 mm using the SMT method, so implementation is easy.
  • This receptacle connector can also be prepared in an embossed packaging product format.
  • This receptacle connector has a metal shell structure used for the mold cover, providing the ideal protective measures for ESD.
  • A latch lock is applied to both sides for mating processes.
  • This lock is implemented with the minimum space possible, and helps downsize your product set.
  • Choose from 0.5, 1, or 1.5 mm for the circuit board thickness and support fittings length.
  • The wire connection of this plug connector use a solder attachment type applicable to all types of wires.
  • The number of pins available is either 8 or 10.

  • Remise sur volume

  Sélectionner et comparer

  à partir de∗ ：	1.61 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur carré multibroche (SUMICON) série 1600【1-100 pièces par conditionnement】

  Hirose Electronic

  The SUMICON 1600 series of rectangular multi-pin connectors are built using an original Hirose Electric design. These connectors can be used for a variety of different applications based on the combination of connector unit and case employed.
  
  [Features]
  · The same nine versions that are available in the 1300 series are available here, with the numbers of pins equal to 8, 12, 16, 20, 24, 28, 34, 45, or 60.
  · Connector units are available in soldering, wrapping, or crimping types.
  · Available accessories include C cases, CA cases, CBA cases, ST stoppers, STA stoppers, STB stoppers, and others. Combining connectors with these accessories opens up a wide range of possible applications.

  • Remise sur volume

  Sélectionner et comparer

  à partir de∗ ：	0.46 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Connecteur d'interface rectangulaire, profil ultra-bas - série LX

  Hirose Electronic

  An ultra-low-profile interface connector with a mounting height of 2.0 mm. While being ultra low-profile, provides toughness and excellent contact reliability, contributing to the slimming of devices.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Remise sur volume

  Sélectionner et comparer

  à partir de∗ ：	1.07 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur mâle pour relais de soudure à haute pression, série HIF3BA-*PD

  Hirose Electronic

  Can be used for cable-to-cable wiring inside machinery. The HIF3B series socket is also compatible with the HIF3A series.

  • Remise sur volume

  Sélectionner et comparer

  à partir de∗ ：	7.24 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Boîtier série HCN

  HONDA TSUSHIN KOGYO

  An ultra-compact and space saving 0.8mm pitch interface connector case.

  Sélectionner et comparer

  à partir de∗ ：	3.59 €
  Délai d'expédition minimum ：	49 jours

  *Prix unitaire/configuration de base

• 

  Adaptateurs pour connecteurs multipoints série HCN.【10 pièces par conditionnement】

  HONDA TSUSHIN KOGYO

  [Features]
  · An adapter for use with HCN Series multi-drops.

  Sélectionner et comparer

  à partir de∗ ：	54.89 €
  Délai d'expédition minimum ：	64 jours

  *Prix unitaire/configuration de base

• 

  Connecteur pour soudure à haute pression - série HCN【10 pièces par conditionnement】

  HONDA TSUSHIN KOGYO

  [Features]
  · The HCN Series crimp connector.

  Sélectionner et comparer

  à partir de∗ ：	54.87 €
  Délai d'expédition minimum ：	93 jours

  *Prix unitaire/configuration de base

• 

  Connecteur E/S 3M^TM au pas de 2.0mm, fiche mâle à montage sur carte, type vertical

  3M

  Metal shroud provides EMI shielding. Kinked products—for more secure temporary retention to boards—are also available.
  
  [Features]
  · A 2.0-mm pitch 6-pin connector for connecting industrial machinery wires.
  · Provides both thick diameter electric line connection and space savings.
  · EMI/ESD countermeasure items.
  · Reliable retention on board based on shroud integrated mounting pin.
  · A vertical-type, board-side connector.
  · Kinked parts for more secure temporary retention to boards are also available.

  Sélectionner et comparer

  à partir de∗ ：	4.28 €
  Délai d'expédition minimum ：	94 jours

  *Prix unitaire/configuration de base

• 

  Connecteur 3M^TM Delta pour câble plat au pas de 1.27mm

  3M

  [Features]
  · Compatible with 1.27-mm pitch flat cables and round cables with processed flat tips.
  · Also supports connection by bulk pressure welding and daisy chains.
  · Low-profile design.

  • Remise sur volume

  Sélectionner et comparer

  à partir de∗ ：	21.51 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Prises pour système Mini Delta Ribbon (MDR) 3M^TM

  3M

  [Features]
  · Half-pitch I/O connector "Industry Standard Product" MDR system.
  · Low insertion removal force and torsion countermeasures through use of pre-force style cantilever contact ensures high reliability.
  ▪ EMI/ESD countermeasure items.
  · Tough structure based on a die-cast lock stand.
  • M2.5 is also available for fixed screw sizes corresponding to ISO standards.
  · Products equipped with a ground lock are available to streamline the pre-soldering of temporary mountings and ground processing.

  • Remise sur volume

  Sélectionner et comparer

  à partir de∗ ：	4.43 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Série 17JE, type DIP droit

  FUJIKURA (DDK)

  Straight DIP type connector which can be mounted vertically on a PCB.

  CAD ：

  2D

  Sélectionner et comparer

  à partir de∗ ：	6.58 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteurs de type soudé, série 17JE

  FUJIKURA (DDK)

  [Features]
  · This hand soldered wiring connector features solder cup type contacts.
  · The number of pins can be 9, 15, 25, or 37.
  · Stranded cables of 22 AWG or lower are optimal. (Please use a 40 W or lower soldering iron.)
  · Surface treatment of the metal shell involves beat processing pin connectors with nickel plating.
  · The metalized hood on the cable/plug wiring parts also effectively shields from electromagnetic interferences.

  • Remise sur volume

  CAD ：

  2D

  Sélectionner et comparer

  à partir de∗ ：	3.63 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Connecteurs de type à immersion, type L, série 17LE

  FUJIKURA (DDK)

  Connects to a circuit via dip soldering to PCB through-holes. The bracket is affixed to a PCB via fastening with screws.
  
  [Features]
  • Comes in 9, 15, 25, or 37 contact models.
  • A base and hex nuts can be installed for securing the coupling to the other side.
  • The surface of the metal shell is nickel-plated and the pin connectors are heat-treated.
  • Different types of grounding fixtures are available for the brackets, delivering even more reliable EMI shielding.

  CAD ：

  2D

  Sélectionner et comparer

  à partir de∗ ：	4.24 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Câble plat de type à soudage par pression série 57FE

  FUJIKURA (DDK)

  [Features]
  • The 57FE series is a flat cable pressure-welded connector that has fittings covered by a metal shell, which is a countermeasure for electromagnetic radiation that helps reduce noise.
  • Basic varieties include 10, 20, 30, and 40 types.

  • Remise sur volume

  CAD ：

  2D

  Sélectionner et comparer

  à partir de∗ ：	9.57 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Prise ruban DIP type droit, série 57GE.

  FUJIKURA (DDK)

  [Features]
  ・The 57GE series consists of straight DIP-type connectors with fittings covered by a metal shell, which is a countermeasure against electromagnetic radiation that helps to reduce noise.
  ・Type 40 (receptacle for I/F).

  • Remise sur volume

  CAD ：

  2D

  Sélectionner et comparer

  à partir de∗ ：	7.07 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• • En vente jusqu'au 31/01/2022

  

  Prise à angle droit série 57LE

  FUJIKURA (DDK)

  [Features]
  - An L-type DIP connector with fittings covered by a metal shell, blocking electromagnetic waves and reducing noise.

  • Remise sur volume

  Sélectionner et comparer

  à partir de∗ ：	7.58 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Série 57RE - connecteurs pour prise à angle droit, type ruban, léger

  FUJIKURA (DDK)

  These connectors have fewer parts than 57LE series connectors and are lighter as well. (The shell and end disk latch are a single unit, as are the insert and locater.)
  
  [Features]
  • The 57RE series connectors have fewer parts than the 57LE series connectors, and are lighter as well.
  
  • Connectors on the other side fit plug connectors belonging to the 57, 57F, 57FE, and 57JE series.
  • UL application filed (File No. E72124).

  • Remise sur volume

  Sélectionner et comparer

  à partir de∗ ：	3.04 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur conforme à la norme MIL, pas de 2.54mm, série FRC2

  FUJIKURA (DDK)

  This 2.5 mm pitch crimped connector, which is for use with flat ribbon cables, is compliant with MIL-DTL-83503 and suitable for a variety of applications.
  
  [Features]
  ▪ Compliant with MIL-DTL-83503.
  ·The new wire connecting operation is simple because the crimping system does not require removal of the coating.
  ▪ UL standard certified product (File No. E72124).
  ·The dual mechanism used to prevent incorrect mating includes both a polarity key and an incorrect insertion prevention key.
  ·Lock levers include the normal long lock as well as the short lock, which is suitable for use with low profiles.
  ·This connector is compatible with discrete wire crimping types in the HU series.
  ·This connector is also compatible with FRC2 headers and FRC5 socket connectors.

  Sélectionner et comparer

  à partir de∗ ：	4.17 €
  Délai d'expédition minimum ：	43 jours

  *Prix unitaire/configuration de base

• 

  Connecteur DN pour interface type profil bas, petit format

  Hirose Electronic

  This small, multi-pin rectangular connector was developed to support the miniaturization of electronic devices, and thinner devices in particular
  
  [Features]
  · The terminal's wire connector is arrayed in a 2.54 mm grid that makes it easy to design circuits on a printed circuit board.
  · The structure of the terminal is based on the manufacturer's SM series (D-sub connectors). This gives the terminal dependable quality.
  · The single-action lock mechanism provides excellent operability.
  · The cover case is designed to be thin and compact and features a low profile in order to meet the needs of high-density mounting. Mounting with 17.78 mm (700 mils) between circuit boards is possible.
  · The cover case is made of an aluminum die casting offering good electromagnetic shielding characteristics. Combined with the connector's metal shell, the above configuration ensures that noise is reduced.
  · The dip connector includes a snap (circuit board temporary joint) bracket.
  · Pressure Connecting type supports connection of two wire types, AWG 26 and 28, via pressure welding, for use with standard 1.27-mm pitch cables.
  · Crimping type can be used to perform crimping of AWG 26 to 28 wiring.
  · Depending on the application, cable can be extracted in either the vertical or horizontal direction.

  • Remise sur volume

  Sélectionner et comparer

  à partir de∗ ：	3.40 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Circuit imprimé soudé à haute pression avec connecteur pour câble plat, pas de 1.27mm, série FRC-J.

  FUJIKURA (DDK)

  [Features]
  · The FRC-J Series is optimally suited for top connecting to PCBs and PCB-to-PCB connections.
  · The terminals are arranged in two-columns (2.54-mm grid).

  Sélectionner et comparer

  à partir de∗ ：	4.32 €
  Délai d'expédition minimum ：	68 jours

  *Prix unitaire/configuration de base

• 

  Série Han-Eco, capuchon / logement

  Harting

  [Features]
  ・The IP65-class was developed for thermo-plastic hoods and housings. This type is very strong, lightweight, and also waterproof (Model types are separated by a "-" rather than a space).

  • Remise sur volume

  Sélectionner et comparer

  à partir de∗ ：	14.58 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur Han série Q (connexion de câble sertie)

  Harting

  This series is even smaller than the Han A series. Saves space, as the connector outer diameter is the same size even if the number of wires increases (Models are separated using "-" rather than spaces).

  • Remise sur volume

  Sélectionner et comparer

  à partir de∗ ：	8.81 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Connecteur Han série D/DD (connexion de câble sertie)

  Harting

  Available in a wide range of variations in the number of pins. Ideal power source connector for use in harsh environments. Crimp connection for reliable connection (Models are separated using "-" rather than spaces).

  • Remise sur volume

  Sélectionner et comparer

  à partir de∗ ：	4.98 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur E/S série au pas de 2.00mm

  MOLEX

  A Molex 2.0 mm pitch connector for external relay connection.

  • Remise sur volume

  Sélectionner et comparer

  à partir de∗ ：	5.92 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Compact Robot Connector CRC (51233)

  MOLEX

  A Molex connector which support currents of 7.0 to 15.0 A. Maximum number of pins: 50. Ideal for industrial robots and FA applications (compatible housings: 51239/54332)

  • Remise sur volume

  Sélectionner et comparer

  à partir de∗ ：	3.62 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Compact Robot Connector CRC (51238)

  MOLEX

  A Molex connector which support currents of 7.0 to 15.0 A. Maximum number of pins: 50. Optimal for industrial robots and FA applications (compatible housings: 51234/55836)

  Sélectionner et comparer

  à partir de∗ ：	3.69 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  CRC™ (Compact Robot Connector) (54332)

  MOLEX

  Molex models work with 7.0 A to 15.0 A currents and have a maximum pole number of 50. Optimal for commercial robots and FA-related applications (mating housing: 51233)

  • Remise sur volume

  Sélectionner et comparer

  à partir de∗ ：	15.27 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  CRC™ (Compact Robot Connector) (54333)

  MOLEX

  Molex models work with 7.0 A to 15.0 A currents and have a maximum pole number of 50. Optimal for commercial robots and FA-related applications (mating housing: 51238)

  • Remise sur volume

  Sélectionner et comparer

  à partir de∗ ：	23.89 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  CRC™ (Compact Robot Connector) (55836)

  MOLEX

  Molex models work with 7.0 A to 15.0 A currents and have a maximum pole number of 50. Optimal for commercial robots and FA-related applications (mating housing: 54333/54334)

  • Remise sur volume

  Sélectionner et comparer

  à partir de∗ ：	19.86 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  CRC™ (Compact Robot Connector) (55890)

  MOLEX

  Molex models work with 7.0 A to 15.0 A currents and have a maximum pole number of 50. Optimal for commercial robots and FA-related applications (mating housing: 51297/51301)

  Sélectionner et comparer

  à partir de∗ ：	4.11 €
  Délai d'expédition minimum ：	Devis

  *Prix unitaire/configuration de base

• 

  CRC™ (Compact Robot Connector) (56377)

  MOLEX

  Molex models work with 7.0 A to 15.0 A currents and have a maximum pole number of 50. Ideal for industrial robots and FA-related applications (compatible housings: 55890 / 51300 / 51233 / 51238)

  Sélectionner et comparer

  à partir de∗ ：	6.47 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur encartable, pas de 4mm, série 1150N

  KEL

  Card edge connector for industrial equipment, using tongue-type contacts to achieve stable contact.

  • Remise sur volume

  Sélectionner et comparer

  à partir de∗ ：	19.79 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Capuchon à verrouillage par simple pression pour connecteur D-Sub

  Provertha

  One-touch attachment and detachment of the Dsub connector will be possible. Can be installed freely using 3 connection accessories (locking bolts).

  • Remise sur volume

  Sélectionner et comparer

  à partir de∗ ：	8.04 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

Loading...