Connecteurs ronds（Page 3）

?* À propos du délai d'expédition et des prix

• 

  Connecteur mâle M12 double

  WEIDMUELLER

  M12 twin plug straight.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	13.45 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur femelle M12 (douille) pour cordon D

  WEIDMUELLER

  M12 D-Cord Connector, Female (Socket)
  
  [Features]
  • M12 D-cord Connector, Female (Socket T).

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	19.08 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Série 25AA

  NANABOSHI

  The 25AA Series are plastic shell connectors with excellent lightweight/rigidity.
  
  [Features]
  · This Series achieves a high cost-performance ratio due to a new concept.
  · This crimped open kit type simplifies the task of wiring.
  · Manufactured with a lightweight plastic shell with excellent rigidity.
  · Electrical Appliance and Material Safety Law compliant product.
  · Insulation resistance: ≥ 2000 MΩ when measured at a specified voltage between the nearest conductors.
  · Voltage resistance: No electrical short-circuit failure occurs even if the specified voltage is applied between the nearest conductors for one minute.
  · Contact resistance: ≤ 3 MΩ when a pair of contacts are joined to a regular length.
  · Vibration resistance: When performing vibration testing, there are no functional problems and the contact resistance is ≤ 3 MΩ.
  · Shock resistance: When performing shock testing, there are no functional problems and the contact resistance is ≤ 3 MΩ.
  · Humidity resistance: When performing humidity testing, there are no functional problems and the insulation resistance is ≥ 10 MΩ.
  · Temperature cycle: When performing temperature cycle testing, there are no functional problems and insulation resistance is ≥ 2000 MΩ.
  · Salt spray: When performing salt spray, there are no functional problems and the contact resistance is ≤ 3 MΩ.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	4.56 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Série BLW

  NANABOSHI

  A BLW Series of waterproof connectors for outdoor with a bayonet locking mechanism.
  
  [Features]
  · The jack effect reduces the force that is required to extract the connector when unlocking.
  · A special surface process is utilized that is different from conventional surface processing methods.
  · IP67 EQUIV.
  · Cable assemblies are also available.
  · These connectors are highly rated by many customers for its high, error-free reliability, turnaround delivery track record.
  · Insulation resistance: ≥ 2000 MΩ when measured at a specified voltage between the nearest conductors.
  · Voltage resistance: No electrical short-circuit failure occurs even if the specified voltage is applied between the nearest conductors for one minute.
  · Contact resistance: ≤ 3 MΩ when a pair of contacts are joined to a regular length.
  · Vibration resistance: When performing vibration testing, there are no functional problems and the contact resistance is ≤ 3 MΩ.
  · Shock resistance: When performing shock testing, there are no functional problems and the contact resistance is ≤ 3 MΩ.
  · Humidity resistance: When performing humidity testing, there are no functional problems and the insulation resistance is ≥ 10 MΩ. Temperature cycle: When performing temperature cycle testing, there are no functional problems and insulation resistance is ≥ 2000 MΩ.
  · Salt spray: When performing salt spray, there are no functional problems and the contact resistance is ≤ 3 MΩ.
  · Waterproofing: When the product was subjected to a water pressure of 40 kPa, no evidence of water ingress was detected after 24 hours under normal usage conditions.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	28.24 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Série NT

  NANABOSHI

  The NT Series was developed for use with industrial equipment power sources and control circuits.
  
  [Features]
  · A connector developed for use with industrial equipment power sources and control circuits.
  · Lightweight and robust.
  · Water- and oil-proof structure.
  · Ground contact included for increased safety.
  · IP67 equivalent.
  · Cable assembly also available.
  · We are highly rated by many customers for our high, error-free reliability, ability to meet deadlines, and high on-time delivery record.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	61.38 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Série R

  NANABOSHI

  The R series includes waterproof connectors with IP-64 equivalent ratings for low-voltage/high-current applications.
  
  [Features]
  • R series connectors.
  · Waterproof connector for low-voltage high current applications.
  • Used in welders, switchboards, etc.
  ▪ IP-64 Equivalent

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	499.80 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Série T

  NANABOSHI

  The T series correspond to round connectors for industrial equipment that employ a mechanically superior shell structure.
  
  [Features]
  • T series connectors.
  • Round connectors for industrial equipment that employ a mechanically superior shell structure.
  • Uses synthetic rubber as an insulator.
  • Mount and remove quickly and easily thanks to a single-action cap-lock mechanism

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	43.76 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Série WT

  NANABOSHI

  The WT series has a shaft seal structure when connected. Waterproof function equivalent to IP-X7.
  
  [Features]
  ・An O-ring seal is used on the panel mounting part of the receptacle.
  ・Based on the NWPC series, a coupling nut (NWPC) is used to improve operability.
  · Cable assembly also accepted.
  · We are highly rated by many customers for our reliability, ability to meet deadlines, and high on-time delivery record.
  ▪ (Insulation resistance) 2, 000 MΩ or more when measured at a specified voltage between conductors which are closest to each other.
  ・(Withstand voltage) No short circuit or abnormality when the specified voltage is applied for 1 minute between the closest conductors.
  ・(Contact resistance) Conductor resistance is 3mΩ or less when a pair of contacts are joined to the normal length.
  ・(Waterproof) No sign of water ingress when left under a water pressure of 100kPa for 2 hours in the normal operating state.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	47.01 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur rond conforme JIS C 5432, série JR【1-100 pièces par conditionnement】

  HIROSE ELECTRONIC

  This is a JIS C 5432 compliant round connector. Excellent electrical and mechanical performance and can be used with a variety of equipment.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.27 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Connecteur Cannon série HA

  HIROSE ELECTRONIC

  Latch-type round connectors mainly for audio equipment. (Usually known as Cannon connectors.)
  
  [Features]
  · There is the HA16 type with its simple and smart streamlined design that puts the cable clamp inside the plug connector, and the HA216 and HA316 types that place the cable clamp on the outside. Select the type that best suits your equipment.
  · Due to the shrinking size of devices, there are four different sizes of connector receptacles to suit the area where your device is installed.
  · For the three-pin type, there are four interlocking types to choose from.
  · There are two types of plug receptacle lock release levers to choose from. The conventional push type, and the more convenient down type (which releases by pushing down on the lever).
  · Select your connector depending on usage. The receptacle-side connector comes in either a solder type or a circuit board DIP type.
  · In addition, the circuit board DIP type can be mounted inside the device, for even easier ease of connection.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	5.23 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur rond étanche petit format à verrouillage à baïonnette, type enfichable, série HR34B

  HIROSE ELECTRONIC

  This is an I/O connector for servo motor signals. It has excellent seismic resistance, is waterproof, and is easily removable, so it can also be used for an extensive array of other applications.
  
  [Features]
  • Waterproof structure: Uses an IP67 mechanism (during mating) with superior oil resistance.
  • In addition, the 4 wire receptacles are waterproof as standalone units.
  • Excellent mating and operability: Simply push in the plug and mating is complete.
  • Rotate the sleep during mating to unlock.
  • The mating position display makes aligning mating time and position easy.
  • Blind mating can be carried out using the 3-position mating guide key (due to the structure of the plug connector, there is no risk of damaging the receptacle terminal).
  • Cable pulling direction is selectable: The right angle plug provides 8 selectable directions in 45° intervals for cable pull direction.
  • Safety Standards: 4-core items correspond to TUV standards.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	7.80 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Connecteur rond petit format à verrouillage par pression-traction, série MXR

  HIROSE ELECTRONIC

  This is a small round connector with ground functionality. The single-action push-pull lock enables quick removal.
  
  [Features]
  • Single-action push lock function enables quick insertion and extraction, and high density implementation is also available.
  • The mating confirmation and "snap" sound ensure proper operation for a lock method with a solid feel.
  • The exterior utilizes aluminum alloy for the purpose of weight reduction.
  • After mating is complete, the exterior metal components provide stable contact points for FCC support.
  • Sequence structure type available for making contact with a single core first during mating.
  • There is a type available with a plug cable that can only be clamped to the locked-in section of the cord pipe, with the goal of dedicated tool reduction for improved workability.
  • There is a type available with a plug cable that can only be clamped to the locked in section of the cord pipe, with the goal of dedicated tool reduction for improved workability.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	5.39 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Connecteur rond plastique, séries RP / RPC

  HIROSE ELECTRONIC

  A push-pull round connector made of plastic. Easy use and simple attachment/detachment due to the light weight.
  
  [Features]
  ・The PR series is a plastic connector that lowers the price of household electronics and responds to the needs of miniaturization.
  ・A unique connector that is inexpensive, small, lightweight, and possesses stable performance.
  ・The lock mechanism uses either a single-action lock or push-on format for quick and easy attachment and detachment.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	2.09 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur rond plastique - série RP13【1-100 pièces par conditionnement】

  HIROSE ELECTRONIC

  A highly reliable compact-type connector that is small, light, and tough, supporting needs associated with the miniaturization of devices.
  
  [Features]
  · Due to its compact shape, fits any model without compromising the aesthetic appearance of the model.
  · Single-action push-pull lock mechanism enables rapid manipulation during insertion and removal, in addition to high-density mounting.
  · The multiple keys of the mating guide ensures the connector is never inserted in incorrect positions.
  · A tough polycarbonate resin material, containing glass is used for the exterior, resulting in light weight and toughness.
  · Wire connection methods include crimping for plugs as well as crimping for receptacles and the circuit board dip method, enabling reduced labor and options better suited to the model used.
  In-stock items are made-to-order products, so returns and cancellations are not possible. Thank you for your understanding.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.14 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur rond plastique série RP5

  HIROSE ELECTRONIC

  Single action push-pull locking mechanism for quick, easy insertion and removal.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	2.40 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Collier de cordon conforme pour connecteur rond

  HIROSE ELECTRONIC

  This is a cord clamp for the RM/HR22 series waterproof connector.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	4.84 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur rond multipolaire haute densité, série HR22【1-100 pièces par conditionnement】

  HIROSE ELECTRONIC

  This is a multi-pin round connector that uses a vibration-resistant screw-coupling structure. (The interior of the coupling is equipped with a spring that prevents loosening of the screws.) Waterproof type and non-waterproof type.
  
  [Features]
  ・There are two types, waterproof and non-waterproof, and each is compatible. The internal structure of the waterproof type is such that it can operate after being submerged at a depth of 1.8 m for 48 hours in a fitted condition, with no ingress of water.
  ・The structure prevents lock loosening. The lock structure has a screw coupling system in which the interior of the coupling is equipped with a spring that prevents loosening.
  ・There are 2 wiring work systems: Crimped types and soldered types. Users can choose depending on the application.
  ・Receptacle installation is easy. From the panel surface, the nut fastening system makes receptacle installation fast and easy.
  ・There are types that also take into consideration lack of flexibility. By covering the shell with a code bushing, the bending radius is enlarged, and this prevents disconnections when the cable is flexed.
  ・It has a high-density layout. Although there are 20 poles, the maximum outer diameter of the plug is Ø 21, which is very high density.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.53 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur rond petit format, série HR10【1-100 pièces par conditionnement】

  HIROSE ELECTRONIC

  This interface connector for cameras is considered the de facto standard. Also, due to the small size, lightweight, and excellent operability, this item can be used with a wide range of equipment.
  
  [Features]
  • The HR10 is a small giant: It's small size is roughly the same diameter thickness as a cigarette.
  • The interior features the necessary functions for a connector in a small, high reliability package, and everything comes together with good balance.
  • Insertion operations are extremely simple: features a single-action pushable lock mechanism for quick insertion.
  • Especially useful during insertion, no matter what portion of the connector is maintained, you can press on it to confirm it's properly locked.
  • You'll never insert this connector incorrectly: Thanks to the five keys, it can never be inserted anywhere except the prescribed location no matter how much you fumble with it.
  • The five keys must be aligned before contact can occur: The contact points are set up in a safe position to ensure they are not damaged through fumbling to get the five keys aligned.
  • Can be used to increase implementation density: Because the push pull lock can be used for insertion operations even in confined spaces, multiple connectors can be implemented in close proximity.
  • This product doesn't use any small screws, so wiring implementation is easy: Connector breakdown, and assembly can be completed without the need for a screwdriver, and wiring implementation can be completed easily with just a JIS wrench.
  • Simple and slim design: The exterior shape is simple and slim, and the surface processing uses a satin finish, so it isn't easily noticed like most connectors and allows you to create an equipment setup that doesn't detract from the beauty of the space. The design matches especially well with small equipment.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.08 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Connecteur rond étanche à blindage, petit format (type de verrouillage à baïonnette) : Série LF

  HIROSE ELECTRONIC

  This is a small waterproof round connector. The structure makes the shield connection and connector assembly easy, and the bayonet lock also makes attaching and detaching it simple.
  
  [Features]
  ・Easily connected shielded wire: The cable's shielded wire is fixed to the outside of the cable using metal fittings attached to the connector, which makes it easy to connect to the connector shell.
  ・Waterproof structure: The waterproofing performance is IP67 in the connector fitted state.
  ・The connector does not use small screws, so the structure is simple.
  ・Bio-Net Lock: The lock has good operability, and has a strong, vibration-resistant structure.
  ・Safety standards are met.
  ・4 cores at 10 A comply with overseas safety standards (TUV).
  ・In addition, 3 cores and 4 cores comply with UL standards.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	9.75 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Connecteur rond format ultra-petit, série HR25 / HR25A【1-100 pièces par conditionnement】

  HIROSE ELECTRONIC

  This is an ultra-small, high-density, round connector. A secure screw lock style and a smooth push-pull lock style are available. A wide variety is available to suit different applications.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.12 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Connecteur rond format ultra-petit, série SR30

  HIROSE ELECTRONIC

  This is a small, round connector with a maximum outer diameter of ⌀15. Ideal for use with interfaces of small devices.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.31 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Connecteur rond pour usage général (Lamicon) série RM【1-100 pièces par conditionnement】

  HIROSE ELECTRONIC

  [Features]
  ・This is a general-purpose round connector, originally developed in response to demand for high-performance equipment and miniaturization.
  ・In the decades since its development, it has been used in a wide range of equipment.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.33 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Connecteur rond étanche pour usage général, série RM-W

  HIROSE ELECTRONIC

  This is a RM series waterproof connector. A waterproof function has been added, while maintaining the features of the conventional product.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	3.66 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Série CN-70-AJ

  SATO PARTS

  CN-70 series. The receptacle side for a 2-pin/3-pin/4-pin outlet rated 125 VAC, 5 A. A worry-free product that is made in Japan. Nut tightener included.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	3.47 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Type étanche, type de connexion à souder série JL04V

  JAPAN AVIATION ELECTRONICS(JAE)

  High reliability round connector that is TUV certified as a European safety standard connector.
  [Features]
  · An environment-resistant structure that prevents water, oil, dust, etc. from entering from the outside thanks to its IP67 class waterproof and dust-proof capabilities.
  · Compatible with MIL standard MS connectors.
  [Applications]
  · A highly reliable round connector used as a European safety standard compatible connector.
  · Widely usable as a connector; optimal for circuit connections of various industrial equipment such as machine tools and servo motors.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	26.81 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur rond étanche à connexion soudée, série WEB

  FUJIKURA (DDK)

  The shell has 5 positioning keys. By changing the key positions, it is possible to prevent mismatching, even when using a large number of connectors with the same contact array.
  
  [Features]
  • The WEB series is a round, waterproof connector with IP67-rated protective structure.
  • The contact layout uses the same insert as the JM series.
  • The locking method of the connector has been changed from screw to turn-lock type to increase the connection reliability.
  • The locking method is turn-lock, allowing locking and release to be confirmed by the click sound when the connector is rotated through 90 degrees.
  • The solder cup contacts embedded in the insert are aligned in the same direction, making wire connection simple.
  ▪ UL standard certified: File No. E72124

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	19.33 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Séries D / MS (D190) - connecteurs ronds étanches à l'eau / résistants aux projections d'eau

  FUJIKURA (DDK)

  [Features]
  • D/MS (D190) series connectors are waterproof plugs that are interchangeable with other D/MS connectors and CE02-2A receptacles.
  • Ideal for external connecting plugs that must be drip-proof and waterproof, especially for industrial equipment such as servomotors.
  • These connectors are compliant with MIL-DTL-5015, and are interchangeable with other D/MS connectors.
  • Insert layouts are common between D/MS connector inserts. As for D/MS connectors, 73 insert layouts are available.
  • Waterproof when coupled to D/MS3102A box receptacles (rated IP67).
  • If the other connector is a CE02-2A, waterproofing performance is even more reliable.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	14.01 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Série CN-70-A

  SATO PARTS

  [Features]
  ▪ CN-70 series.
  · A connector for 2-pin/3-pin/4-pin outlets, 5 A, 125 VAC.
  · Nut tightening, anxiety free product made in Japan.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	12.73 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Connecteur type à verrouillage simple pression, série PRC03

  TAJIMI ELECTRONICS

  Easily detachable push-pull one-touch PRC03 connector. Will not be loosened by vibrations and shocks. Can be used in a wide range of applications, for measurement and as an industrial connector.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	4.85 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Connecteur petit format, résistant à l'eau, type à visser, série RO4

  TAJIMI ELECTRONICS

  The RO4 connector is a screw-type mating connector that is water resistant, small, and made of metal. This connector, when mated, is totally water resistant up to a pressure of 200 kpa or a water depth of 20 m. This means it can be used in water or rainy weather without adverse effects.
  
  [Features]
  · Ultra small-type connector featuring total water resistance and multiple round terminals.
  · Able to be used at a water depth of 20 m, this product can be used in water or rainy weather without adverse effects, making it optimal for all types of electronic devices.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	8.73 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Série 710

  BINDER

  A small, lightweight resin connector with IP40-grade protective function, flame retardant to grade UL94HB (housing) and UL94V-0 (internal elements). Bayonet fitting type allows easy mounting.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	9.90 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Série 720

  BINDER

  [Features]
  · A snap-in connection that disconnects if the cable is pulled forcefully and an easy-to-assemble structure offer a high level of safety. This lightweight plastic connector offers the protective performance of IP67 when connected as well as the flame-retardant performance of UL94V-0.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	12.67 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Connecteur de verrouillage en métal, série UTG

  SOURIAU

  UTG series metal locking connector
  
  [Features]
  ▪ Plastic connector + metal coupling ring.
  ▪ The UTG Series is an economical plastic connector, which by use of a metal cup ring has enabled extended mating life (500 times).
  ▪ Options that can be chosen include 8 types of shell sizes, 12 types of pin arrangements, and 3 types of VDE versions.
  ▪ This series is compatible with UTP.
  ▪ Relevant Certification Obtained: UL (File No. E238675).

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	19.60 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Série CN-70-B

  SATO PARTS

  CN-70 series. This is the product where CN-70-P and CN-70-BJ are a set. A screw clamp, PSE-marked product made in Japan.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	10.04 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Connecteur CPC série 1

  TE CONNECTIVITY

  CPC Connector Series 1. Round connector of lightweight, heat resistant, self-extinguishing, flexible material.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	7.81 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur de relais étanche type enfichable, série THB387

  TAKACHI ELECTRONICS ENCLOSURE

  Used for wiring in conditions requiring waterproofing,
  including power for industrial equipment and manufacturing machinery, sensor relays, outdoor LED lighting, underground wiring, and ships, etc.
  
  [Features]
  　● Waterproof relay connector set comprising a plug (male) and socket (female).
  　● Wire connection is performed using screws, making the work much easier. Different numbers of terminal electrodes can be selected; choose from 3P/4P/5P.
  　● For safety purposes, install the connector so that the primary side (socket side) is female and the secondary side (plug side) is male.
  
  We offer the following 3 products to fit the number of electrodes (number of cores).
  (1) THB387-3P (Number of terminal electrodes 3P)
  (2) THB387-4P (Number of terminal electrodes 4P)
  (3) THB387-5P (Number of terminal electrodes 5P)
  
  [Rating/Specifications]
  　● Rated voltage: 450 VAC
  　● Rated current: 17.5 A
  　● Applicable wire type: stranded wire 0.5mm2–4.0mm2 ((1) (2)) / stranded wire 0.5mm2～1.5mm2 ((3))

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	22.60 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Connecteur de relais étanche en T type THB390 / 400

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · A waterproof connector that is connected by a screw for making work easier.
  · Choose from six types of terminals, without terminal blocks: 3P, 4P, 6P, 2WP, 3WP.
  · For the terminals without terminal blocks, please use protection for connectors, etc.
  · These can support various cable diameters by using the optional rubber bushings (not available for some products).

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	12.76 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Connecteur de relais étanche en L à angle droit THB390L / 401L

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · Designed to save space when you want to bend the cable ground into a 90-degree, L-shaped cable.
  · The cable connects by a screw, making work easier.
  · Choose from two types of terminals: 3P and 6P.
  · These can support various cable diameters by using the optional rubber bushings.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	16.64 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur de relais résistant à l'eau THB39

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · Integrated construction of cable gland and terminal base for a compact and waterproof relay connector.
  · Ideal for electric cables, motor relays, and sensor relays in industrial equipment and manufacturing machinery.
  · Wire connection uses screws, making the work easy to perform.
  · The terminal portion can be selected from 3 types: 2P, 3P, and 4P.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	12.73 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Connecteur de relais étanche à jonction en Y THB399Y

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · The main body is Y-shaped, which is useful for cable splitting.
  · Wire connection uses screws, making the work easy to perform.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	22.63 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur étanche de montage pour panneau THB406

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · Waterproof connector consisting of a set made up of a plug side (male) and socket side (female).
  · Can be plugged in and removed after installation on panel or housing.
  · Wire connection uses screws, making the work easy to perform.
  · For number of terminal poles, 3P and 6P types are available.
  · For safety purposes, place the connector so that the primary side (socket side) is female and the secondary side (plug side) is male.
  · The color of the terminal block may vary at the convenience of the manufacturer.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	27.17 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Fiche série Mini-XL (capuchon en métal)

  ITT CANNON

  [Features]
  · Mini-XL series plug (metal cap).
  · It is smaller and has inherited the one touch lock of the XL series.
  · Also compatible with non-broadcast equipment applications.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	15.75 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Fiche série Mini-XL (grand capuchon)

  ITT CANNON

  [Features]
  · Mini-XL series plug (large cap).
  · It is smaller and has inherited the one touch lock of the XL series.
  · Also compatible with non-broadcast equipment applications.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	13.18 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Prise série Mini-XL (carrée)

  ITT CANNON

  [Features]
  · Mini-XL series receptacle (square).
  · It is smaller and has inherited the one touch lock of the XL series.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	13.26 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Prise série Mini-XL (ronde)

  ITT CANNON

  [Features]
  ・Mini-XL series receptacle (round).
  ▪ It is smaller and has inherited the one touch lock of XL series.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	19.54 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

Loading...