Connecteurs coaxiaux（Page 2）

?* À propos du délai de livraison

• 

  Série CN-7045-P

  SATO PARTS

  [Features]
  ▪ Works with the plug of CN-7045.
  ▪ CN-7041-P and CN-7045-P are identical products.
  · The colors are red and black. Safety and reliability are assured because it is manufactured in Japan.

  • Remise sur volume

  à partir de∗ ：	2.79 €
  Délai de livraison minimum ：	24 jours

  *Prix unitaire/configuration de base

• 

  Série CN-7046-J

  SATO PARTS

  [Features]
  ▪ Receptacle part of CN-7046.
  · The colors are red and black. Safety and reliability are assured because it is manufactured in Japan.

  à partir de∗ ：	3.84 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Série CN-7046-P

  SATO PARTS

  [Features]
  ▪ Works with the plug of CN-7045.
  ▪ CN-7042-P and CN-7046-P are identical products.
  · The colors are red and black. Safety and reliability are assured because it is manufactured in Japan.

  • Remise sur volume

  à partir de∗ ：	2.79 €
  Délai de livraison minimum ：	24 jours

  *Prix unitaire/configuration de base

• 

  Connecteur coaxial en N - série N

  HIROSE ELECTRIC

  A medium-sized coaxial connector with a screw coupling lock for broadband (up to DC 10 GHz). We stock a wide array of variations, such as plugs, jacks, and adapters, etc.
  
  [Features]
  · 1. Constant Impedance Connector - 50 Ω Series
  · The N Series are medium-sized constant impedance connectors suitable for medium-sized coaxial cables (75 Ω Series is also available).
  · 2. Lock-type Screw Coupling.
  · A screw coupling with a locking mechanism for secure locking.
  · 3. Compatible Cables
  · RG-5/6/8/9/U, etc.
  · 4. Compatible Standards
  · Japan Defense Agency (DSPC6201).
  · Japan Industrial Standards (JISC5411).
  · MIL Standards Compliant.

  • Remise sur volume

  Délai de livraison minimum ：	4 jours

• 

  Connecteur coaxial de forme TNC - série TNC

  HIROSE ELECTRIC

  A small, locking type screw coupling coaxial connector. This connector is optimally suited to connecting to mobile radio equipment antennas due to its mechanical robustness.
  
  [Features]
  · 1. Mechanically robust due to center locking contact.
  · 2. The center wire is connected by solder and the outer wires are connected by crimped terminal connectors.
  · 3. Optimally suited to connecting to mobile radio equipment antennas.

  • Remise sur volume

  Délai de livraison minimum ：	4 jours

• 

  Connecteur coaxial 75Ω type SMB, série 27CP

  DDK

  [Features]
  · The 27CP series of connectors correspond to a 75 Ω version of the 27DP series of connectors (50 Ω type).
  · This connector, which is representative of small 75 Ω connectors, is frequently used in applications such as interfaces inside devices.
  · The push-on method makes it easy to connect or disconnect.
  · This part is not compatible with the 27DP series.

  • Remise sur volume

  à partir de∗ ：	4.81 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Série 27DP - connecteurs coaxiaux type SMB

  DDK

  Connectors are made to be compliant with the SMB type defined in MIL-PRF-39012. Can be used for miniaturization and increasing the density of communications equipment
  
  [Features]
  • The 27DP series correspond to connectors made to be compliant with the SMB (Sub-Miniature Type B) type defined in MIL-PRF-39012.
  · A 50 Ω connector for fine cabling that enables miniaturization and increased density of communications equipment.
  • The coupling mechanism is push-on, and cables are mounted by crimping or soldering.

  • Remise sur volume

  à partir de∗ ：	6.14 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Série 31 - prises isolées BNC (type monté sur panneau)

  DDK

  [Features]
  • These insulated receptacles are panel mounted and connected to BNC series (plug) connectors.
  · Reliable insulation is achieved between the external conductor of the connector and the panel.
  ▪ The ground terminal is connected to the external conductor and integrated with the mold adjacent to the central conductor. Hence, it is easy to handle.
  • The round-pin contact types (31-10-CF and 31-10-CAu-CF) are UL-listed (UL File No. E72124).

  • Remise sur volume

  à partir de∗ ：	4.49 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Prise isolée BNC série BNC-RD (type à montage sur circuit imprimé)

  DDK

  [Features]
  ·This insulated receptacle is a printed circuit board mounting type that mates with the BNC series (plugs).
  ·Reliable insulation achieved between the external conductor of the connector and the panel.
  ▪ The ground terminal is connected to the external conductor and integrated with the mold adjacent to the central conductor. Hence, it is easy to handle.
  ·As a VA product, this receptacle's contact uses sound or shape (press contact).
  ·The receptacle can be mounted on a printed circuit board either vertically or horizontally.
  ·The height from the printed circuit board is low, at 14.0 mm when the receptacle is mounted horizontally on the printed circuit board.
  · The product can be used in an extensive range of applications, including computers, communication devices, and medical devices.

  • Remise sur volume

  à partir de∗ ：	7.30 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur coaxial forme BNC 75Ω, série BNC 75

  DDK

  These are the 75 Ω counterparts of the BNC series connectors (50 Ω). The bayonet lock system is easy to attach and remove.
  
  [Features]
  • The BNC75 series connectors are the 75-Ω counterparts of the BNC series (50 Ω).
  • Interchangeable with the BNC series.
  • The bayonet locking system is easy to attach and remove.

  • Remise sur volume

  à partir de∗ ：	9.73 €
  Délai de livraison minimum ：	43 jours

  *Prix unitaire/configuration de base

• 

  Série BNC - connecteurs coaxiaux type BNC

  DDK

  [Features]
  • BNC series connectors are used in a wide range of products as 50-Ω coaxial connectors.
  • Compact and lightweight, these connectors are often used as interfaces, particularly for equipment that is frequently mounted and dismounted, thanks to their easily coupled and disengaged bayonet lock connection mechanism.
  • If you use 75-Ω cables, use these connectors at frequencies of 200 MHz or less.
  • When exceeding 200 MHz, use BNC75 series connectors.
  • BNC and BNC75 series connectors are interchangeable.

  • Remise sur volume

  CAD ：

  2D

  à partir de∗ ：	3.52 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Série MMCX - connecteurs coaxiaux ultra-compacts

  DDK

  [Features]
  • The MMCX series corresponds to push-on lock style connectors suitable for use with extremely fine coaxial cables. They are ideal when space is at a premium.
  • Straight, right-angle, and SMT-mounted types are available.
  • These connectors boast excellent frequency characteristics of approximately DC 6 GHz and a VSWR of 1.2 max.

  • Remise sur volume

  à partir de∗ ：	6.85 €
  Délai de livraison minimum ：	43 jours

  *Prix unitaire/configuration de base

• 

  Connecteur coaxial en N, série N

  DDK

  [Features]
  • The N series are 50 Ù-type 7-mm coaxial connectors (inner diameter of outer conductor) with an excellent track record.
  • A wide variety is offered to fit various types of cable.
  (Note): This is not compatible with the NC series (75-Ω series), so please be careful.

  • Remise sur volume

  à partir de∗ ：	5.09 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur SMB série PSC (pièce économique)

  DDK

  [Features]
  · This push-on coaxial connector is a small, lightweight product that provides compatibility with MIL standard SMB connectors.
  · Uses press-molded parts to reduce costs.
  · Usable frequency range is up to 4 GHz DC with a voltage standing wave ratio of 1.2 or lower.
  · Mated height is 9 mm or lower from the circuit board.
  · Both flexible and semi-flexible cables are supported.

  • Remise sur volume

  à partir de∗ ：	3.40 €
  Délai de livraison minimum ：	43 jours

  *Prix unitaire/configuration de base

• 

  Connecteur coaxial petit format, série PSD

  DDK

  [Features]
  · The PSD series is an MIL-STD-348A-compliant SMP series of small push-on lock coaxial connectors.
  · There is little of the instability characteristic of the push-on type of connector at the time of fitting, and performance is stable even at high frequencies.

  • Remise sur volume

  à partir de∗ ：	64.93 €
  Délai de livraison minimum ：	43 jours

  *Prix unitaire/configuration de base

• 

  Connecteur coaxial 75Ω type SSMB, série SSMB75

  DDK

  [Features]
  · The SSMB75 series corresponds to a 75 Ω connector version of the SSMB series (50 Ω type).
  · This ultra small push-on type 75 Ω connector was originally developed by DDK, and is frequently used for applications such as interfaces inside devices.
  · The adoption of a closed entry structure protects this connector against prying.
  · One to five series types are available for L-shaped receptacles (for use on printed circuit boards).
  · Not compatible with the SSMB series.

  • Remise sur volume

  à partir de∗ ：	7.63 €
  Délai de livraison minimum ：	43 jours

  *Prix unitaire/configuration de base

• 

  Série SSMB - connecteurs coaxiaux type SSMB

  DDK

  These coaxial connectors are ultra-low profile, push-on type connectors compliant with IEC-Pub.169-19.
  
  [Features]
  • Ultra-low profile, push-on type connectors made for compact, higher density communications equipment, these coaxial connectors are compliant with IEC-Pub.169-19.
  • The height from the PCB when coupled is 6 mm or less (when SP and LR are coupled) or 11 mm or less (when LP and SP are coupled).

  • Remise sur volume

  à partir de∗ ：	11.54 €
  Délai de livraison minimum ：	53 jours

  *Prix unitaire/configuration de base

• 

  Connecteur coaxial type TNC, série TNC

  DDK

  [Features]
  · The TNC Series connectors convert the BNC Series connectors to a screw-coupling method.
  · The screw-coupling method is mechanically strong and resistant to external vibrations with negligible high-frequency leakage.
  · The TNC Series conforms electrically and mechanically to the BNC Series.
  · The recommended torque for tightening the coupling is 45–68.6 N⋅cm.

  • Remise sur volume

  à partir de∗ ：	10.92 €
  Délai de livraison minimum ：	43 jours

  *Prix unitaire/configuration de base

• 

  Série 27 DS - connecteurs coaxiaux type SMC

  DDK

  These connectors are made to be compliant with the SMC type defined in MIL-PRF-39012. Applicable to miniaturization and high density of communication equipment
  
  [Features]
  · The 27DS series are connectors made to be compliant with the SMC (SubMiniature Type C) type defined in MIL-PRF-39012.
  · This is a 50 Ω connector for a fine cable that is compatible with efforts to make communications equipment small and dense.
  · We recommend tightening couplings to a torque of 24.5–35.3 Ncm.

  • Remise sur volume

  à partir de∗ ：	7.01 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Fiche pour câble de connecteur BNC

  TO-CONNE

  [Features]
  · Small and light weight using a bayonet locking method for simple coupling. A plug.
  ▪ When a 75 Ω cable is used with a 50 Ω type connector, and the frequency is 200 MHz or less, it can be used on a 75 Ω transmission line, but when the frequency exceeds 200 MHz, use of a BNC 75 Ω type is recommended.

  • Remise sur volume

  à partir de∗ ：	3.11 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Prise type isolé pour connecteur BNC

  TO-CONNE

  [Features]
  · Small and light weight using a bayonet locking method for simple coupling. Insulated receptacle.
  ▪ When a 75 Ω cable is used with a 50 Ω type connector, and the frequency is 200 MHz or less, it can be used on a 75 Ω transmission line, but when the frequency exceeds 200 MHz, use of a BNC 75 Ω type is recommended.

  • Remise sur volume

  à partir de∗ ：	3.05 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Fiches pour câbles de connecteur F

  TO-CONNE

  [Features]
  • Used primarily in TV antennas used for terrestrial digital broadcasting.
  • Uses a coaxial core wire (center conductor) as its contact.
  • Uses the center conductor of the coaxial cord as its contact.

  • Remise sur volume

  à partir de∗ ：	2.67 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteurs SMA - fiche en L pour câbles

  TO-CONNE

  [Features]
  · A high performance compact connector for microwaves which is usable over a wide frequency range, and features superior durability.
  · The body is made of stainless steel but less expensive brass is also available

  • Remise sur volume

  à partir de∗ ：	20.28 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Fiches pour câbles de connecteur SMA

  TO-CONNE

  [Features]
  · A high performance compact connector for microwaves which is usable over a wide frequency range, and features superior durability.
  · The body is made of stainless steel but less expensive brass is also available

  • Remise sur volume

  à partir de∗ ：	6.64 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Prises pour connecteurs SMA

  TO-CONNE

  [Features]
  · A high performance compact connector for microwaves which is usable over a wide frequency range, and features superior durability.
  · The body is made of stainless steel but less expensive brass is also available

  • Remise sur volume

  à partir de∗ ：	6.82 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Fiche incurvée en L pour câble de connecteur SMB

  TO-CONNE

  [Features]
  · High frequency compatible connector where the connection method is a push on method primarily made for size and weight reduction of equipment

  • Remise sur volume

  à partir de∗ ：	7.70 €
  Délai de livraison minimum ：	Devis

  *Prix unitaire/configuration de base

• 

  Fiche pour câbles de connecteur SMB

  TO-CONNE

  [Features]
  · High frequency-compatible connector wherein the connection method used is a push on method primarily designed for size and weight reduction of equipment

  • Remise sur volume

  à partir de∗ ：	6.43 €
  Délai de livraison minimum ：	Devis

  *Prix unitaire/configuration de base

• 

  Prises pour PCB à connecteur SMB

  TO-CONNE

  [Features]
  · High frequency-compatible connector wherein the connection method used is a push on method primarily designed for size and weight reduction of equipment

  • Remise sur volume

  à partir de∗ ：	3.29 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur coaxial série BNC

  TAJIMI ELECTRONICS

  The BNC connector is the most widely used 50 Ω connector. Small, lightweight and easy to remove bayonet lock connection method, making it ideal for connection of equipment that will be connected and disconnected frequently.

  • Remise sur volume

  à partir de∗ ：	6.24 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Série CN-5-J/P

  SATO PARTS

  [Features]
  ▪ CN-5 series.
  ・These products are sets containing CN-5-P and CN-5-J.
  ・Available in black and red. These are reliable product made in Japan.

  • Remise sur volume

  à partir de∗ ：	5.87 €
  Délai de livraison minimum ：	34 jours

  *Prix unitaire/configuration de base

• 

  Série CN-6-J/P

  SATO PARTS

  This is the product where CN-6-P and CN-6-J of the CN-6 series are a set. Available in red and black. Made in Japan, to give you reliability and security.

  • Remise sur volume

  à partir de∗ ：	6.70 €
  Délai de livraison minimum ：	34 jours

  *Prix unitaire/configuration de base

• 

  Série CN-7017-J/P

  SATO PARTS

  This is the product where CN-7017-P and CN-7017-J of the CN-7017 series are a set. This is safe, reliable and made in Japan.

  • Remise sur volume

  à partir de∗ ：	5.50 €
  Délai de livraison minimum ：	34 jours

  *Prix unitaire/configuration de base

• 

  Série CN-7018-J/P

  SATO PARTS

  This is the product where CN-7018-P and CN-7018-J of the CN-7018 series are a set. This is safe, reliable and made in Japan.

  à partir de∗ ：	5.90 €
  Délai de livraison minimum ：	34 jours

  *Prix unitaire/configuration de base

• 

  Série CN-7041-J/P

  SATO PARTS

  This is the product where CN-7041-P and CN-7041-J of the CN-7041 series are a set. Available in red and black. Made in Japan, to give you reliability and security.

  à partir de∗ ：	5.34 €
  Délai de livraison minimum ：	34 jours

  *Prix unitaire/configuration de base

• 

  Série CN-7042-J/P

  SATO PARTS

  This is the product where CN-7042-P and CN-7042-J of the CN-7042 series are a set. Available in red and black. Made in Japan, to give you reliability and security.

  à partir de∗ ：	5.37 €
  Délai de livraison minimum ：	34 jours

  *Prix unitaire/configuration de base

• 

  Série CN-7045-J/P

  SATO PARTS

  This is the product where CN-7045-P and CN-7045-J of the CN-7045 series are a set. Available in red and black. Made in Japan, to give you reliability and security.

  • Remise sur volume

  à partir de∗ ：	5.53 €
  Délai de livraison minimum ：	34 jours

  *Prix unitaire/configuration de base

• 

  Série CN-7046-J/P

  SATO PARTS

  This is the product where CN-7046-P and CN-7046-J of the CN-7046 series are a set. Available in red and black. Made in Japan, to give you reliability and security.

  • Remise sur volume

  à partir de∗ ：	5.53 €
  Délai de livraison minimum ：	34 jours

  *Prix unitaire/configuration de base

• 

  Fiche modèle BNC【1-2 pièces par conditionnement】

  DENSAN

  [Features]
  - BNC crimp plug ensures work can be done quickly.
  [Use]
  - Coaxial cable terminal for BNC plugs.

  • Remise sur volume

  à partir de∗ ：	8.34 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

Loading...