Connecteurs entre circuits imprimés（Page 2）

?* À propos du délai de livraison

• 

  Connecteur pour carte SIM, série ID1

  HIROSE ELECTRIC

  This is a SIM card connector. With the slide-lock method, card holder opening and closing is easy.

  • Remise sur volume

  à partir de∗ ：	1.54 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur série ID2 pour cartes à puce

  HIROSE ELECTRIC

  These are connectors for smart cards with card detection switches.
  
  [Features]
  · ISO-7816 standard smart card compliant: The feature of smart cards was that they were very secure in comparison to conventional credit cards. But in the future, smart cards will be indispensable for payment systems.
  · In addition, smart cards will be used in payment systems for digital satellite broadcasting, which has spread quickly across the globe.
  · This ID2M series has been developed to be a socket for the smart cards used with digital satellite reception devices (IRD).
  · They can also be used as a socket for a wide variety of smart applications.
  · Eight wire cable: ISO-7816 standard cable for smart cards is available as an 8-wire cable only.
  · Equipped with a card detection switch: As it can detect whether or not a smart card has been inserted, it prevents accidental activation.
  · The switch will turn OFF (non-conducting) if the smart card remains inserted until the end of the process.

  • Remise sur volume

  à partir de∗ ：	2.88 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur pour clé de mémoire

  HIROSE ELECTRIC

  This is a socket connector for a memory stick.

  • Remise sur volume

  à partir de∗ ：	2.19 €
  Délai de livraison minimum ：	Devis

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés conforme à la norme DIN, série 128A

  DDK

  [Features]
  · Three types (standard, reverse, and horizontal-mounting) available for use in a wide range of electronic equipment.
  · Can be used on IEC-standard 19-inch card frames.
  · A special socket contact shape provides self-cleaning and self-wiping effects, providing a stable connection.
  · Contact timings are staggered for each socket contact row, allowing contact with the GND terminal first before contacting the signal terminal.

  à partir de∗ ：	1.94 €
  Délai de livraison minimum ：	68 jours

  *Prix unitaire/configuration de base

• 

  Connecteurs d'empilement, pas de 0.8mm, série DFJ

  DDK

  A compact 0.8-mm pitch connector for stacking connection (parallel) of small PCBs.
  
  [Features]· Choose from 9 PCB spacing dimensions of 10 mm and between 13–20 mm in 1-mm increments.
  · A surface-mount (SMT) type for mounting onto PCBs. A fixing bracket is provided for secure attachment to the board.
  · The connector opening is structured to prevent insertion errors.
  · Contacts are cantilevered for minimal deformation during coupling.
  · The lineup includes an easy-locking connector that provides a ‘click’ feeling when the contact is inserted.

  CAD ：

  2D

  à partir de∗ ：	2.07 €
  Délai de livraison minimum ：	73 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés, demi-pas, série DHB

  DDK

  There are two contact tail lengths (long and short) for each row to better facilitate insertion into PCB through holes.
  
  [Features]
  ・In addition to lock pins for fixing to the PCB, some of the contacts (4 on each side) have kink processing for temporary holding of the connector.
  ・A number of products are available to fit different applications (with a base 15.1 mm spacing between boards), including slotted types with zero breakages (even if the connector is removed at an angle), 1.4 mm sequencer types for different contact timing, low-profile types with 10 mm spacing between boards, and 1 mm stacking receptacles available over a range of 17 to 20 mm.
  ・The plug connector can also be used as a mating connector for the flat cable connector DHD series.
  ・Complies with Lead Free regulations.

  CAD ：

  2D

  à partir de∗ ：	2.20 €
  Délai de livraison minimum ：	68 jours

  *Prix unitaire/configuration de base

• 

  Connecteur à embase profil bas, pas de 2.54mm, série HU5

  DDK

  Double-row terminal array 2.54 mm grid type low profile connector. Compatible with FRC2 and FRC5 series (flat cable pressure welded type) sockets.

  CAD ：

  2D

  à partir de∗ ：	1.66 €
  Délai de livraison minimum ：	63 jours

  *Prix unitaire/configuration de base

• 

  Série DHD - connecteurs de câble plat dédiés à une utilisation à l'intérieur d'équipements demi-pas

  DDK

  [Features]
  • Compatible with half-pitch connectors used for DHB series PCBs.
  • Pressure contact isolates the cable into two sections at the top and bottom covers, using the covers for insulation, which makes insulation dependable.
  • The connectors allow for daisy-chain connections.
  • The easy-locking type is far shorter than the usual ejector lock (26-, 34-, 40-, 50-, 60-, and 68-contact types).
  • The ejector lock types (34-, 50-, 68-, 80-, and 100-contact types) lock and disengage easily, and provide secure locking.

  CAD ：

  2D

  à partir de∗ ：	3.79 €
  Délai de livraison minimum ：	68 jours

  *Prix unitaire/configuration de base

• 

  Connecteur DIN (type à connexion par câble) - XC6

  OMRON

  [Features]
  ・ A connector for cable connection that broadens the applications for DIN connectors.
  ・ There are 2 types of connector available for connecting flat cables and discrete wires, which can then be selected according to the application.
  ・ By using flat cable connectors (XC6D and XC6H types), VME bus configurations (daisy chain) and backplane configurations are possible.
  ・ The connector for discrete wire connections (XC6V type) uses pressure welded contacts and partitioned contact blocks, significantly reducing the work load associated with harnessing.
  ▪ RoHS compliant.

  à partir de∗ ：	2.40 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur DIN (type double contact) - XC5 (norme DIN)

  OMRON

  [Features]
  ・ The number of international standard DIN connectors has been expanded substantially.
  ・ The aim is to expand the number of contacts while leveraging the best points of DIN connectors.
  ・These variations can be used with a number of industrial applications.
  ・ This fits global needs by moving from one-piece connectors (card edged) to two-piece connectors.
  ・ A low price has been realized while also being able to maintain high reliability through the use of a twin contact type.
  ・ Low insertion force has been realized thanks to FEM analysis.
  ・ Can fit with the manufacturer's XC series.
  ▪ UL standard (File No.E103202) and CSA standard (File No. LR62678) certified products are used as standard.
  ▪ RoHS compliant.

  • Remise sur volume

  à partir de∗ ：	2.16 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur DIN (à emmanchement, type à broche W), XC5 (à emmanchement)

  OMRON

  [Features]
  · International standard DIN solder-less connecting connector (popular name: press-fit) Series.
  · Compliant with DIN standards, these connectors make working with backplane systems easy.
  · A shape that ensures minimal hole-damage.
  · A highly reliable connection is possible thanks to the unique W-shape, which helps counter issues of twisting and sagging.
  · A shape that minimizes damage to PCB through holes.
  · The Omron type XC6 series can be used as a connector for backplane connections.
  · The socket utilizes a highly reliable dual contact (2-point contact) system.
  · A dedicated press-fitted jig is equipped as standard.
  ▪ RoHS compliant.

  à partir de∗ ：	20.74 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur style DIN (type double contact) - XC5 (style DIN)

  OMRON

  [Features]
  ・ An expanded DIN style connector series, designed with DIN in mind.
  ・ Fits with DIN standard connectors.
  ・ As it is a circuit board mounted type, it is ideal for automatic solder mounting.
  ・ DIN style 1 uses the same method of attachment as DIN.
  ・ DIN style 2 broadens the mounting dimensions further, allowing mounting with excess room.
  ・UL standard (File No.E103202) and CSA standard (File No. LR62678) certified products are used as standard.
  (Except XC5).
  ▪ RoHS compliant.

  • Remise sur volume

  à partir de∗ ：	2.07 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur séquentiel pour prise DIN - XC7

  OMRON

  [Features]
  · A sequence connector made using DIN standard dimensions.
  · Daughterboard hot swapping is made possible by inserting a power line from the front and extracting from the rear.
  · Can be used in the same way as with standard DIN connectors. The mounting dimensions are the same as standard B type, and C type DIN connectors. Uses a sequence terminal for all connections and has a fit length of 4 mm, helping vastly save on mounting space.
  · Uses a 2-stage sequence for the socket-end 1 mm sequence terminal, and 3-stage sequence for the plug-end sequence terminal.
  · The contacts use a dual-sided contact structure. Furthermore, the gold/palladium plating of the contact points increases durability and allows for 5,000 insertions and extractions.
  · The sequence terminal position can be chosen.

  à partir de∗ ：	7.63 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur HM (connecteurs au pas métrique, pas de 2mm) - XC8 / XC9

  OMRON

  [Features]
  ・ PCI bus standard for use with industrial-use computers.
  ・ Compliant with Compact PCI compatible board-to-board 2.0-mm pitch IEC61076-4-101 connectors.
  ・ Supports 3U and 6U Euro Card packages.
  ・ The socket contact is a highly reliable double-sided contact type.
  ▪ UL standard (File No.E1032020) certified products are used as standard (except for some products).

  à partir de∗ ：	3.58 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Prise IC - XR2

  OMRON

  [Features]
  ・ Highly reliable such as being able to cope with sudden power outages etc.
  ・Ideal for high speed data processing circuits.
  · The contacts are round 4-point pin contacts which have good retention and superior vibration and shock resistance.
  ・ The opening for inserting the contact is large, so insertion is easy.
  ・ The position of the contact with the IC (integrated circuit) lead is high, ensuring an excellent contact.
  · Has excellent resistance to rises in flux.
  ・ A rich product lineup, including open frame, closed frame, single-row type, DIP terminal, wrapping (wrap) terminal, and low-profile DIP terminal types.
  ・ Gold flash-plated products are also now available as a series, allowing you to choose the perfect product for the application..
  ▪ UL standard (File No.E103202).
  ・ Certified products are used as standard.
  ▪ RoHS compliant.

  à partir de∗ ：	0.90 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Prises IC type rétractable - XR3G

  OMRON

  [Features]
  ・ IC sockets suitable for shrink ICs.
  ・ Dedicated IC sockets for shrink ICs with 1.778 mm of contact pitch.
  · With round pin type four point contacts, retention is good as is vibration and shock resistance.
  · Has excellent resistance to rises in flux.
  ▪ RoHS compliant.

  à partir de∗ ：	5.31 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur USB, XM7

  OMRON

  A compact interface connector that complies with USB standards
  
  [Features]
  · Mini-USB connector.
  · 5000 installation/removal cycles.
  · L-shaped DIP terminals and SMT terminals available.
  · USB connector.
  · The A type socket is for PCs and USB hubs, etc. The B type socket is for printers, scanners, mice and other PC peripherals.

  à partir de∗ ：	1.07 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur ZD - XC3

  OMRON

  A high speed transmission connector that supports differential [high-speed signal] transmission
  
  [Features]
  · A small outline package 4 pin MOSFET relay that is a thin mini-flat type with a height of 2.1 mm.
  · Ideal for replacing dial pulse relays and hook relays for modems and fax machines.
  ▪ Ideal for use with PBX and switching equipment line interfaces.
  · Hybrid IC and PCMCIA compliant card type modems are also supported.
  · Load voltage: 200 V type.
  ▪ UL1577 standard obtained (File No.E80555).
  ▪ RoHS compliant.

  à partir de∗ ：	13.34 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Fiche d'origine - XG8

  OMRON

  [Features]
  ・ This is a general purpose original plug that conforms to a broad range of applications.
  ・ It can be widely used as a plug for a variety of socket fitting.
  ・ Examples of conforming socket connectors (manufacturer: …, Connector for XG4M flat cable/XG5 loose wire insulation displacement connector.
  · Compatible with through hole diameter ⌀0.8.
  ・ For the 2-column type of L-shape terminal plug, through the utilization of a block type of base, workability is improved during soldering, a lock lever that has been simplified further is used and simple locking is possible (except for XG8V, XG8W Straight).
  ・ Separation cut is possible (except XG8WL type).
  ▪ UL standard (File No.E103202).
  ・ Certified products are used as standard (only XG8A and XG8B).
  ▪ RoHS compliant.

  à partir de∗ ：	1.05 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur demi-pas (pour connexions d'empilement profil bas) - XH4A

  OMRON

  [Features]
  ・A half-pitch connector with same shaped pins (male) and sockets (female) for stacking connections. Handles heights between circuit boards of 5 mm to 11 mm.
  ・ A half-pitch connector for low profile stacking connections. Handles heights between circuit boards of 5 mm to 11 mm at a pitch of 1 mm (surface mounting types handle heights of 5 mm to 9 mm at a pitch of 1 mm).
  ・ A selection of DIP and surface mounting type (SMT) are available.
  ・ A connector with same shaped pins (male) and sockets (female).
  ・ Standardized stop pins for all contacts to prevent floating and falling during soldering.
  ・ A leaf contact structure that can cope with prying.
  ▪ A UL standard certified product (File No.E103202) (except for SMT type).
  ・Cannot be mated with XH2/XH3 half pitch connector.

  à partir de∗ ：	4.38 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur demi-pas (pour connexions entre circuits imprimés) - XH2

  OMRON

  A 1.27-mm pitch connector for high-density mounting and compacted electronic devices
  
  [Features]
  · Available in the same shape as the G5D in both AC/DC or DC-only types.
  · Open-state leakage current between outputs is 10 μA or less.
  · The voltage resistance between input/output is 2500 VAC.
  · Input resistance and non-input resistance types available.
  · Overvoltage absorption circuit built in.
  ▪ Can switch between AC full-wave rectification and half-wave rectification.

  à partir de∗ ：	2.92 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur demi-pas (pour connexions entre circuits imprimés) - XH3

  OMRON

  [Features]
  ・ A space saving type that saves space in the screw mounting section.
  ・ Handles stacking heights of 12 mm to 20 mm.
  ・ A half pitch connector that handles heights between circuit boards of 12 mm to 20 mm at a pitch of 1 mm with stacking connections.
  ・ High-density mounting is possible thanks to the 2-row configuration with a contact pitch of 1.27 mm.
  ・ Connections with the circuit board use four row staggered configurations (1.27 mm × 1.905 mm), and stop pins are used as standard for all contains to help prevent floating and falling during soldering.
  ・ Uses a leaf connection structure that is able to hold up to prying and that enables smooth insertion and extraction.
  ・ Has a mating length of 3.1 mm, helping improve space during mounting.
  ・ The design of the press fit section helps maintain a stable contact force.
  ・ What's more, by utilizing gold and palladium-plated contact points, the reliability of the contacts has been improved even further.
  ▪ UL standard certified product (File No.E103202).
  ・Cannot be mated with XH2/XH4 half pitch connectors.

  à partir de∗ ：	2.73 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur de câble plat (type à usage général) - XG4

  OMRON

  The core of this printed circuit board connector is compliant with MIL standards.
  
  [Features]
  · The adoption of a new high-productivity design has delivered both high reliability and low costs.
  · A box type plug (XG4C type) that helps save space during installation is also available.
  · A press-fit type plug (XG4E type) that can be used as a relay is also available.
  · A wide range of installation options are available by combining discrete wire press-fitted/crimped connectors (XG5 type), original plugs (XG8 type), and PCB types (XG2 type).
  · The use of the simple and unique locking levers developed by the manufacturer makes it possible to lock original plugs (XG8 type) and box type plugs (XG4C type).
  · Complies with MIL standards (MIL-C-83503).
  · UL standard (File No.E103202) certified products are used as standard (except for the XG4U and XG4H models).
  ▪ RoHS compliant.

  • Remise sur volume

  à partir de∗ ：	0.42 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Système de verrouillage arrière rotatif (pas de 0.5mm, type double contact) - XF2M

  OMRON

  [Features]
  · Significantly improves workability by providing a highly reliable rotating lock structure.
  · Provides a dual top–bottom contacting method, which has reduced the number of component pieces.
  · Conforming FPC/FCC thickness t = 0.3 mm.
  · Works with halogen-free applications.

  à partir de∗ ：	1.75 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteurs de court-circuit - XJ8 / XG8S / XG8T

  OMRON

  [Features]
  · A low-profile, economical connector that is used for circuit switching.
  · Provides an above circuit board height of 5.8 mm (XJ8 type) or 6.8 mm (XG8S/T), and a low profile.
  · These connectors can also be used both vertically and horizontally in 2.54-mm grid high-density mountings.
  · Available in a lineup of one to three rows.
  · Compatible with through hole diameters of ⌀0.8.
  · An easy-to-insert, difficult-to-remove structure.
  · A 2-point contact structure with high contact reliability.
  · The thin plug housing (XJ8 type) is made using PPS resin, which has excellent heat-resistant characteristics.
  · UL Standard (File NO E103202).
  · Certified products are used as standard (XJ8 type).

  à partir de∗ ：	0.39 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur EnerBee circuit imprimé à câble avec verrou, série DF33C【1-100 pièces par conditionnement】

  HIROSE ELECTRIC

  Maximum 5 A. 3.3mm pitch. Satisfies the criteria of the Electrical Appliances and Material Safety Act: Creepage distance: 1.5 mm (resin filling) Widely used as a compact internal power supply connector.

  • Remise sur volume

  à partir de∗ ：	0.34 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur EnerBee circuit imprimé à câble avec verrou, série DF60【1-700 pièces par conditionnement】

  HIROSE ELECTRIC

  Maximum 45A. 10.16-mm pitch. This high power connector for large currents is the smallest size in its class.

  • Remise sur volume

  à partir de∗ ：	0.98 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur EnerBee circuit imprimé à câble avec verrou, série DF63【1-100 pièces par conditionnement】

  HIROSE ELECTRIC

  Maximum 15A. 3.96mm pitch. This connector employs a center lock function which enables high-density mounting, contributing to space saving on the board.

  • Remise sur volume

  à partir de∗ ：	0.35 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur EnerBee circuit imprimé à câble avec verrou, série EM35M

  HIROSE ELECTRIC

  Maximum 50A. This relay type connector has the largest current capacity in the EnerBee range, and is widely used for wiring in large-scale equipment.

  • Remise sur volume

  à partir de∗ ：	10.14 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés FunctionMAX, série FX18

  HIROSE ELECTRIC

  0.8mm pitch. This is the basic series that is central to the FunctionMAX range. Selection is easy from the wide range of options, and the product is very user-friendly.

  • Remise sur volume

  à partir de∗ ：	4.05 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés FunctionMAX, série FX20

  HIROSE ELECTRIC

  0.5mm pitch. The structure features two independent contacts for high contact reliability. It is suitable for harsh conditions such as automotive equipment applications.

  • Remise sur volume

  à partir de∗ ：	1.41 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés FunctionMAX, série FX22

  HIROSE ELECTRIC

  0.5mm pitch. This series was developed as a horizontal connection type of the FX20. It allows horizontal connection of multiple contacts.

  • Remise sur volume

  à partir de∗ ：	6.19 €
  Délai de livraison minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés FunctionMAX, série FX23

  HIROSE ELECTRIC

  0.5mm pitch. This single connector combines two opposing functions: a floating design and high-speed transmission.

  • Remise sur volume

  à partir de∗ ：	3.09 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés FunctionMAX, série FX30B

  HIROSE ELECTRIC

  3.81-mm pitch/ 7.62-mm pitch. A special position shift absorbing function has been added, which performs a similar role to the floating function.

  • Remise sur volume

  à partir de∗ ：	2.12 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

Loading...