Connecteurs en nylon（Application：Pour PCB）

?* À propos du délai d'expédition et des prix

• • Recommandation

  

  Connecteur à connexion facile pour équipement industriel - XN2

  OMRON

  [Features]
  · A simple wire connection connector that is compliant with e-con specifications and is suitable for sensor connections.
  · Utilizes a spring clamp method, which has a solid track record for wire connections in industrial uses.
  · Wire connections are simple and do not require special tools.
  · Repeat wire connections (repairs) are also possible.
  · The 28–20 AWG (0.08–0.5 mm²) wiring range can be supported with a single connector (cover OD: ⌀1.5 or smaller).

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	3.49 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion jusqu’au 30/11/2024
  • Recommandation

  

  Série D3000

  TE CONNECTIVITY

  
  The D-3000 series, compatible with a wide range of dynamic main series sizes.
  
  [Features]
  · Terminal construction resistant to tampering: developed by the automobile industry, a recess tab box construction concept (3-point contact) is used that is difficult to pry apart. These tough contacts offer high reliability and stability in a real work environment.
  · Three types of plating: Select the type of plating best suited for the job and optimize cost performance. Tin plating is suitable for normal use with a low insertion/extraction frequency; 0.38 μm gold plating for frequent insertion and extractions; and 0.76 μm gold plating is suited for use in an even harsher environment.
  · Two types of connection point pressure: Two contact point pressures are available in order to propose a contact environment optimal for the specific type of use. Standard connection point pressure products are for insertion/extraction durability and multiple pin use, and high connection point pressure products are for uses involving strong vibration. These two types can be used separately.
  · High current: Maximum 15 A of regular current (with a temperature elevation of less than 30°C) can be used regardless of size.
  · Newly developed copper alloy material realized with a reliable 3-point contact construction.
  · Lock filling: A clear locking sound and vibration are produced when mating, allowing workers to be sure mating has been successfully completed even in environments with low visibility.
  · Keying: A slit in the housing is provided so that improper unions can be prevented by distinguishing X keys from Y keys. If a keying plug is used, further key patterns may be created.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	1.17 €
  	Prix spécial
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Galette fil à circuit imprimé, droits, pas de 3.50mm (53258)

  MOLEX

  [Features]
  · Molex wire-to-board connector.
  • Straight type (fits housing 51067).
  · Number of leads: 2 to 15 leads.
  • Phosphor bronze: 53258-30.
  • Brass: 53258-29.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.56 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Galette fil à circuit imprimé, à angles droits, pas de 3.50mm (53259)

  MOLEX

  [Features]
  · Molex wire-to-board connector.
  • Right angle type (fits housing 51067).
  · Number of leads: 2 to 15 leads.
  • Phosphor bronze: 53259-17; Brass: 53259-29.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.54 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Embase Mini-Fit Jr.™ droite (5566)

  MOLEX

  Molex connectors for wire-to-wire and board-to-board are available in both single row and double row types. Power connector for a maximum rated current of 13.0 A. Straight type. (Mating housing: 5557)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.30 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Galette SPOX™ (5273)

  MOLEX

  [Features]
  The Molex Spox family of wire-to-circuit board connectors have a structure that works within a pitch range of 2.50 mm to 5.08 mm. (Mating housing: 5195)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.17 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Embase mâle avec broche à souder / série 733 qualité 1 / angle droit / pas de 2.5mm

  WAGO

  [Features]
  　● Can be horizontally or vertically mounted on a printed circuit board using a header with right angle solder pins.
  　● Model that makes incorrect insertion impossible: Only matches with the same number of terminals can be latched.
  　● An accessory coding key can be attached.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.84 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Embase mâle avec broche à souder / série 734 qualité 1 / angle droit / pas de 3.5mm

  WAGO

  [Features]
  　● Can be horizontally mounted onto a printed circuit board using right-angle solder pins.
  　● Maximum rated current of 10 A is possible using a 1 x 1 mm pin size.
  　● Incorrect insertion is impossible.
  　● An accessory coding key can be attached.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.81 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Série D4000

  TE CONNECTIVITY

  The D4000 series is optimal for 20A commercial power supply line use.
  
  [Features]
  • Small high current contact point: By increasing the number of contact areas, this newly designed contact point ensures Hertzian stress is divided among 4 contact positions.
  • This not only provides current capacity (rated for 20A maximum), but also increases reliability tremendously.
  • Sequential contact: When circuits are electrified through static electricity or other currents, this product can be used to perform mating via a sequential process, initially by grounding the mating site.
  • Long tab was developed for sequential connection use with tab contacts.
  • By using this long tab in combination with a normal tab contact, a sequential connection environment architecture can be created.
  • High current tine (lead): This type of tine (lead) mounts to a circuit board, and is a newly developed folding V-shaped tine.
  • Although the joining area with the circuit board is wide, the through hole is extremely small, and this allows for easy pattern routing (patent pending).
  • Lock feeling: The clear locking sound and vibration that are apparent to the operator during mating ensure that work can be completed even in environments where visual inspection is not possible, without producing any malfunctions such as incomplete mating (partial mating).
  • Keying: The housing has a keying (slit) installed, and by using X keys and Y keys for different purposes, improper mating can be prevented.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	2.40 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Série D5000

  TE CONNECTIVITY

  A D-5000 Series connector for use with equipment main power supply lines.
  
  [Features]
  · High-current contact: Utilizes a box-shaped contact concept that has high torsional strength based on the Dynamic Series heritage and track record.
  · By using the same kind of newly developed copper alloy in the D-3000 Series, these connectors have excellent elasticity and conductivity characteristics with reliable receptacles and contacts.
  · The silver-plated type D-5000α Series has also been added to cover even higher current ranges.
  · The contacts can be selected to match the application.
  · Sequential contact: Allows sequential coupling to initially ground charged static electricity prior to contact coupling.
  · The long tab was developed for sequential coupling of tab contacts.
  · By using this long tab in combination with the regular tab contacts, it is possible to construct a sequential connection environment.
  · High current tines (lead): This type of tine (lead) mounts to a circuit board.
  · A newly developed twin lead type.
  · This product secures a large joining area with PCBs. Therefore, this enables a reliable pattern and connector connection.
  · IP20 (finger safety protection): The reverse-mount type D-5300 is recommended for applications with live equipment components.
  · By using a housing that can house the equipment (panel side) receptacles and contacts, the equipment connector satisfies the IP20 standard.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	3.05 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Série D1000

  TE CONNECTIVITY

  The D-1000 Series are the smallest connectors within the Dynamic Series range.
  
  [Features]
  [Supports a wide range of wires]
  · This connector offers an extensive range of wiring, and supports 30–18 AWG. The outer diameter of the wire coating is large at ⌀ 2.2 mm (when using the D-1200/D-1500 Series), which can also be used as standard on-board.
  [Crimp tool with interchangeable dies]
  · The die on this standard tool is interchangeable. This a single-handle system gives the die purchase for each range, which makes it possible to reduce lead time and minimize implementation costs.
  [A full Series lineup]
  · The 2.0-mm pitch D-1100 and 2.5-mm pitch D-1200 Series are available for selection depending on the wire sizes and the voltages that are used. The lineup includes a number of electrodes up to a maximum of 40 P.
  · The D-1500 Series lineup features 3.5-mm pitch products that are optimally suited for applications, such as bundling signal wires and branching power supplies.
  · The Series lineup includes different color versions in addition to the previous standard black color.
  · In addition to positively promoting the use of multiple electrodes of the same number, it also contributes to a reducing the amount of time required to assemble connectors.
  · The lineup includes more affordable tin plated products, as part of the terminal plating specifications, in addition to conventional products with standard gold plating.
  · Contact options support an extensive range of uses based on application, quality, and cost considerations.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	1.16 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Série D2000

  TE CONNECTIVITY

  The D-2000 Series remains small while satisfying specifications for industrial equipment.
  
  [Features]
  Twist-resistant terminal and housing structure: The box shaped recessed contacts are twist-resistant. The housing slits also prevent diagonal mating. This contributes to increased reliability.
  Effective mating length: By securing a long and effective mating length, the demands of industrial equipment can be met with high reliability.
  Applicable wires: This product can be used with AWG18 wires that are widely used in the industrial equipment sector.
  · Lock filling: A distinct locking sound and vibration are transferred to the worker when mating the connector. This makes it possible to complete work without coupling errors (half-mating) even when working in low-visibility environments.
  · Keying: The keying (slit) in the housing is provided to prevent coupling errors by distinguishing X keys from Y keys. Additional key patterns can be created by using a keying plug.
  · Center locking format: When high-density signal line mountings on circuit boards are required, the footprint on the circuit board can be minimized by mounting narrow-pitch connectors.
  · Drawer type: The drawer type has been developed so that each side of the connector has a floating construction. This is as an application that is aimed toward meet the requirements of blind mate connections. The maximum number of pins for the Series is 50P. Using this connector unit-to-unit blind mate connections are possible.
  · Hybrid type: This type can house the signal lines in the D-2000 contacts and the power line in the D-3000 contacts. The D-2600 Series can bundle the signal and power lines into a single connector. This contributes to the footprint of the circuit board and improve maintainability.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	1.18 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur Mate-N-Lok commercial

  TE CONNECTIVITY

  Small, lightweight connector that can increase precision of equipment.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	1.53 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• • En promotion jusqu’au 30/11/2024

  

  Connecteur Mate-N-Lok universel

  TE CONNECTIVITY

  Universal Mate-N-Lok conforms to UL and CSA standards.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	4.81 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion jusqu’au 30/11/2024

  

  Connecteur à système d'interconnexion RITS

  TE CONNECTIVITY

  A “click” sound can be heard when latching while in the smart lock configuration. A connector that lets you easily make connections simply by pushing up with a general purpose tool.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	3.00 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion jusqu’au 30/11/2024

  

  SYSTÈME DE MINI-CONNECTEURS D'E / S INDUSTRIELS

  TE CONNECTIVITY

  [Features]
  A small, compact latch system with two configurations to prevent mis-mating.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	8.46 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Connecteur NH【50 pièces par conditionnement】

  JST

  The post with base has three types: top, side and bottom. Electrical entry is possible in three directions: at right angles to the board (up or down) or parallel to the board.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	38.74 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur PH【500-1,000 pièces par conditionnement】

  JST

  This slim, low profile connector has been designed in response to requirements for higher density internal wiring.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	87.85 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur XA (pour PCB)【1-250 pièces par conditionnement】

  JST

  This connector has a strong locking mechanism to prevent the housing from coming off, and to prevent mis-insertion when mating.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.86 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur XH【10 pièces par conditionnement】

  JST

  Based on the high reliability and versatility of the NH series, this connector has been designed to be smaller, with a mounting height of 9.8 mm.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	10.50 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Produit C-Grid® (70568)

  MOLEX

  Molex 2.54-mm pitch double-row connector for board-to-board connections. Available in straight and right angle types.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	6.12 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  CLIK-Mate™ fil à circuit imprimé de type coudé (503175)

  MOLEX

  [Features]
  • A Molex product that delivers excellent connection reliability with a low input force.
  • With a satisfying “click”, realizes a secure right-angle fitting (fitting housing: 502578).

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.61 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  CLIK-Mate™ fil à circuit imprimé de type droit (503159)

  MOLEX

  A Molex product that delivers excellent connection reliability and a low input force. Achieves secure mating with a pleasant “click”. Straight type (Mating housing: 502578)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.33 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Système d'interconnexion KK®, galette de type en angle (5046)

  MOLEX

  [Features]
  An ever-popular Molex connector for wire-to-circuit board connections. Angled type. (Mating housing: 5051/51191)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.25 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Système d'interconnexion KK®, galette de type droite (5045)

  MOLEX

  [Features]
  An ever-popular Molex connector for wire-to-circuit board connections. Straight type. (Mating housing: 5051/51191)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.62 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Galette droite MicroBlade™ au pas de 2.00mm pour cartes de circuit imprimé (51004)

  MOLEX

  [Features]
  A highly-reliable Molex product with a box type terminal and a straight and right angled flexible design. Straight type (Mating housing: 51004)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.56 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Galette pour circuit imprimé en angle MicroBlade™ au pas de 2.00mm (51005)

  MOLEX

  [Features]
  A highly-reliable Molex product with a box type terminal and a straight and right angled flexible design. Angle type (mating housing: 51004)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.88 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Galette pour circuit imprimé MicroClasp® au pas de 2.0mm (55917)

  MOLEX

  [Features]
  A space-saving Molex product that offers easier removal than other similar 2.00 mm (.079") and 2.50 mm (.098") pitch wire-to-circuit board connection systems. (Mating housing: 51353)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.76 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Galette pour circuit imprimé MicroClasp® au pas de 2.0mm (55932)

  MOLEX

  [Features]
  A space-saving Molex product that offers easier removal than other similar 2.00 mm (.079") and 2.50 mm (.098") pitch wire-to-circuit board connection systems. (Mating housing: 51382)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.39 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Galette pour circuit imprimé MicroClasp® au pas de 2.0mm (55935)

  MOLEX

  [Features]
  A space saving Molex product that offers easier removal than other similar 2.00 mm (.079") and 2.50 mm (.098") pitch wire-to-circuit board connection systems. Angle type (mating housing: 51382)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	1.01 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Galette pour circuit imprimé MicroClasp® au pas de 2.0mm (55959)

  MOLEX

  [Features]
  A space-saving Molex product that offers easier removal than other similar 2.00 mm (.079") and 2.50 mm (.098") pitch wire-to-circuit board connection systems. Angle type (mating housing: 51353).

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	1.52 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Galette pour circuit imprimé Micro-Latch™ en angle au pas de 2.00mm (53254)

  MOLEX

  The head of the Molex receptacle housing uses a friction lock for sliding into the opening. Delivers excellent circuit protection and durability against constant inserting and extracting. Angle type (mating housing: 51065)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.09 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Galette pour circuit imprimé Micro-Latch™ droite au pas de 2.00mm (53253)

  MOLEX

  The head of the Molex receptacle housing uses a friction lock for sliding into the opening. Delivers excellent circuit protection and durability against constant inserting and extracting. Straight type (Mating housing: 51065)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.09 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur pour circuit imprimé Micro-Latch™ au pas de 2.00mm (50165)

  MOLEX

  The head of the Molex receptacle housing uses a friction lock for sliding into the opening. Delivers excellent circuit protection and durability against constant inserting and extracting. (Compatible terminal: 50212, mating wafers: 53253 / 53254)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.06 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Système de connecteurs Milli-Grid™ (87831)

  MOLEX

  2.00 mm pitch Molex product with several variations for board-to-board, wire-to-board, and FFC-to-board. Contributes to flexibility of design. (Compatible housing: 51110)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	2.35 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Embase Mini-Fit Jr.™ en angle (5569)

  MOLEX

  Molex connectors for wire-to-wire and board-to-board are available in both single row and double row types. A power connector for a maximum rated current of 13.0 A. Angled type. (Mating housing: 5557)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	2.72 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur électrique Mini-Fit Sr. (42816)

  MOLEX

  A Molex 10.00 mm pitch wire-to-board, wire-to-wire connector. Maximum current: 50.0 A (2-circuit, applicable wire size: 8 AWG). (Compatible terminal: 42815, compatible housing: 42818)

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	1.29 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Galette fil à circuit imprimé Mini-Lock™ au pas de 2.50mm (53426)

  MOLEX

  Molex types are available in both straight and right angled types. Wire-to-wire optional parts are also available. This product has a high mating workability on the fitting guide wall. Angle type (Mating housings: 51102 / 51103 / 51163)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.16 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Galette fil à circuit imprimé Mini-Lock™ au pas de 2.50mm (53517)

  MOLEX

  Molex types are available in both straight and right angled types. Wire-to-wire optional parts are also available. This product has a high mating workability on the fitting guide wall. (Mating housing: 51103)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.30 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Galette pour circuit imprimé PicoBlade™ au pas de 1.25 mm (53047)

  MOLEX

  A number of wire-to-circuit board and wire-to-wire optional extra Molex products are available. There are variations in the headers of both types: Surface mount type and through-hole type. Straight type (Mating housing: 51021)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.09 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Galette pour circuit imprimé PicoBlade™ au pas de 1.25 mm (53048)

  MOLEX

  A number of wire-to-circuit board and wire-to-wire optional extra Molex products available. There are variations in header of both the types: Surface mount type and through-hole type. Angle type (mating housing: 51021)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.76 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Galette pour circuit imprimé Sherlock™ au pas de 2.00mm (35362)

  MOLEX

  A straight and right angle type single-row Molex connector for wire-to-circuit board connections. A wide lock latch with mating stability and good workability. Straight type (Mating housing: 35507)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.11 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Galette de circuit imprimé Sherlock™ avec pas de 2.00mm (35363)

  MOLEX

  A Molex 1‑row, wire-to-board connector. Straight and right-angled types are available. A wide locking latch for coupling stability and good workability. Angled type (compatible housing: 35507)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.19 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Embase modulaire SL™ en angle (70553)

  MOLEX

  Molex 2.54-mm pitch connector for circuit board-to-wire connections. Available for discrete wires and all types of IDT/FFC cables. 4

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	1.49 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Embase modulaire SL™ droite (70543)

  MOLEX

  Molex 2.54-mm pitch connector for circuit board-to-wire connections. Available for discrete wires and all types of IDT/FFC cables. 3

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.68 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

Loading...