Connecteurs en nylon（Page 2）

?* À propos du délai de livraison

• 

  Connecteur sans alignement 1.25mm

  TE CONNECTIVITY

  [Features]
  · A connector for board-to-board connections with a 1.25 mm contact pitch and an error absorption feature.

  • Remise sur volume

  à partir de∗ ：	5.27 €
  Délai de livraison minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Connecteur / système CT (Common/Termination) (pas de 2mm)

  TE CONNECTIVITY

  [Features]
  · A CT Series, 2 mm pitch, 125 V AC/VDC connector.

  • Remise sur volume

  à partir de∗ ：	0.51 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur d'E/S PC

  TE CONNECTIVITY

  [Features]
  · Taiko Electronics (TE).
  • The cable removal angle is selectable from 2 directions.
  • This is a groundbreaking PC I/O connector that is used as a selection bar.

  à partir de∗ ：	3.83 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur SL

  TE CONNECTIVITY

  An AC250 nylon connector for the SL series.

  • Remise sur volume

  à partir de∗ ：	0.48 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Système d'interconnexion HM 2mm Z-PACK

  TE CONNECTIVITY

  A versatile signal, power, coaxial and fiber board-to-board and cable-to-board connector.

  • Remise sur volume

  à partir de∗ ：	4.43 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur MATE-N-LOK commercial (connecteur)

  TE CONNECTIVITY

  Commercial MATE-N-LOK series 12A and 250 AC connector.

  • Remise sur volume

  à partir de∗ ：	6.17 €
  Délai de livraison minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Connecteur à tiroir standard

  TE CONNECTIVITY

  [Features]
  · 15 A, AC 250, standard drawer connector.
  · 50 per pack.

  • Remise sur volume

  à partir de∗ ：	17.53 €
  Délai de livraison minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Mini-connecteur à tiroir hybride

  TE CONNECTIVITY

  [Features]
  · A hybrid mini-drawer series connector.

  • Remise sur volume

  à partir de∗ ：	3.97 €
  Délai de livraison minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Logement pour fiche de connecteur à double verrou électrique (pour installation de fils)

  TE CONNECTIVITY

  Can be used directly by inserting a wire crimped snap-in type contact into the housing. In addition, equipping the connector with a double lock plate reliably prevents partial mounting.
  
  [Features]
  A connector with a compact design for use in power supply circuits. Optimally suited for wiring in refrigerators, air conditioners, washing machines, copying machines, and vending machines, etc.
  · This connector can be used directly by inserting a wire crimped snap-in type contact into the housing.
  · In addition, equipping the connector with a double locking plate reliably prevents partial mounting.
  · Available in four types: connector housing contact center interval spacing 3.96 mm, 6.5 mm, 7.92 mm, and 13.0 mm.
  · The double locking plates are mounted unidirectionally to each column. Therefore, more than three levels of multipoles can be supported.
  · The lock for the plug-to-cap and plug-to-board mounting header features a semi-inner-lock system. Therefore, there is no risk of it being released due to external pressure.
  · A lineup of both wire-to-wire and wire-to-board connections are available for the same Series.
  · The circuit board header mount supports resin coatings. Therefore, it will not hinder the plug coupling locking function.
  · Designed to comply with all safety standards.
  · The contacts have no lance. The housing lance method prevents tangling between contacts.

  • Remise sur volume

  à partir de∗ ：	3.62 €
  Délai de livraison minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Connecteur à double verrou électrique

  TE CONNECTIVITY

  An AC 300 housing utilizing Power Double Lock Connectors.
  
  [Features]
  · This connector can be used directly by inserting a wire crimped snap-in type contact into the housing.
  · In addition, equipping the connector with a double locking plate reliably prevents partial mounting.
  · Available in four types: connector housing contact center interval spacing 3.96 mm, 6.5 mm, 7.92 mm, and 13.0 mm.
  · The double locking plates are mounted unidirectionally to each column. Therefore, more than three levels of multipoles can be supported.
  · The lock for the plug-to-cap and plug-to-board mounting header features a semi-inner-lock system. Therefore, there is no risk of it being released due to external pressure.
  · A lineup of both wire-to-wire and wire-to-board connections are available for the same Series.
  · The circuit board header mount supports resin coatings. Therefore, it will not hinder the plug coupling locking function.
  · Designed to comply with all safety standards.
  · The contacts have no lance. The housing lance method prevents tangling between contacts.

  • Remise sur volume

  à partir de∗ ：	3.80 €
  Délai de livraison minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Connecteur à verrou positif (Mark II), type commercial

  TE CONNECTIVITY

  [Features]
  · Taiko Electronics (TE).
  • This is a positive-lock series of connectors.
  ▪ 100 per pack.

  • Remise sur volume

  à partir de∗ ：	0.52 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Mini-connecteur CT

  TE CONNECTIVITY

  [Features]
  • This is a Tyco Electronics (TE) mini CT series AC/DC 50 connector with a 1.50-mm pitch.

  • Remise sur volume

  à partir de∗ ：	0.60 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur électrique universel

  TE CONNECTIVITY

  AC300 housing for the Universal Power Connector series.

  • Remise sur volume

  à partir de∗ ：	0.67 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur à treillis

  TE CONNECTIVITY

  This connector has been developed for primary power source (conforms to IEC-950). 12 poles and 28 poles are available.
  
  [Features]
  ・This product has been developed as an I/O connector for copy machines and other OA equipment. 12 poles and 28 poles are available.
  ・The contacts are protected by the square-shaped housing, so it is designed to resist twisting.
  ・The contacts are made of highly conductive material, so high current can be used even though the size is small.
  ・Can also be used for very small currents (signal line). One type of contact is suitable for very low to high current.
  ・This contact has excellent past results. It is resistant to whisker formation and fretting corrosion.
  ・The housing lance method means there is no danger of contacts getting tangled or coming off the housing.
  ・Cable clamp ensures secure fixing of the cable.
  ・One-touch locking for reliable locking is highly regarded.
  ・Designed to prevent contacts colliding with each other.

  • Remise sur volume

  à partir de∗ ：	4.85 €
  Délai de livraison minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Connecteur électrique à clé de 5mm

  TE CONNECTIVITY

  5 mm power key connectors. RoHS compliant.
  
  
  [Features]
  · These power circuit connectors are available in four different keying structures for the same number of electrodes, and are the first available on the market for home appliances, especially gas and other liquid bearing devices.
  · Since conventional methods only differentiated connections by housing color, this method allows for reliable assembly when parts cannot be seen, preventing improper connections.
  · The previously complex ordering and management process has now been made much more efficient.
  · In addition, thanks to the implementation of 1.2R large R shape connectors, you can achieve a work environment that is easy on the hands.
  · A compact design with a coupling height of 19.4 mm.
  · The power circuit connectors have a 5.0 mm spacing between contacts.
  · The board-to-board connectors are structured using a power-supply plug and circuit board header assembly.
  · Reliability is improved since the connector audibly clicks when the contacts are connected.
  · In addition, partial mounting is prevented as it is equipped with a double lock plate.
  · The locking lever is enclosed by a wall on both sides, protecting the lever and preventing wire entanglement.
  · These connectors are constructed to allow air bubbles to escape when potting (circuit board coating).
  · Equipped with a housing lance to prevent contacts from becoming entangled.

  • Remise sur volume

  à partir de∗ ：	4.34 €
  Délai de livraison minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Connecteur Grace Inertia (GIC)

  TE CONNECTIVITY

  These are Grace Inertia connectors. RoHS compliant.
  
  [Features]
  · Designed to achieve a secure connection. These connectors utilize a structure that simultaneously achieves coupling, continuity, and connector locking.
  · These connectors are used in a wide range of large electrical products, such as large home appliances and vending machines, etc., as a solution for eliminating human error during assembly.
  · Incomplete couplings are visually difficult to detect and can present problems during testing processes.
  · This product utilizes a lock-on mechanism that prevents continuity if the coupling is incomplete.
  · Product defects caused by incomplete coupling are prevented by conducting incomplete-coupling and continuity testing simultaneously.
  · The 2.0-mm and 2.5-mm pitch connectors are also available with gold-plated contacts.
  · These products prevent connection failure during prolonged use, such as whiskering and micro-sliding wear, and contribute to improving the task of coupling.
  · A lineup of 2.5-mm, 3.5-mm and 6.2-mm pitch relay connectors is also available.
  · These connectors are also usable for a wide variety of high-current applications.
  · Compliant with RoHS standards.
  · The 2.0-mm and 2.5 mm-pitch products share some of the contacts.
  · The 2.5-mm, 3.5-mm, 6.5-mm, 7.92-mm, and 12.4-mm pitch products are available in four different keying features.
  · UL / CSA

  • Remise sur volume

  à partir de∗ ：	3.29 €
  Délai de livraison minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Connecteur VF enfichable【20-60 pièces par conditionnement】

  FUJI TERMINAL INDUSTRY

  [Features]
  · Complete connections simply by removing wire coating and plugging in.
  · Excellent visual connection confirmation thanks to compact and transparent body.
  · Made from flame-retardant V-0 plastic.
  · Improved reliability since current can be checked with a tester.
  · These products have obtained UL and PSE certification.
  · These products are also RoHS compliant.
  · Color coded by number of wires.
  · Constructed to be easily identifiable by the number of holes.
  · Improved reliability thanks to dual-point contacts (for PC35 series).
  · Box dimensions are uniform throughout the series.
  · Made to save space.

  • Remise sur volume

  à partir de∗ ：	8.94 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur de relais à sertir【20 pièces par conditionnement】

  NICHIFU TERMINAL INDUSTRIES

  A relay connector that does not require special crimping tools.
  
  [Features]
  · Male-female connections can be made with a single connector.
  · No wire coating removal required.
  · Easily connected with pliers.
  · Can be used in a multi-lead capacity when joined to a connector.

  • Remise sur volume

  à partir de∗ ：	3.52 €
  Délai de livraison minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Connecteur réseau de terrain - SCN1

  OMRON

  Field Network Connector - SCN1.

  à partir de∗ ：	6.10 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Borne pour capteur SRT2-□ Connecteur D08S pour connexion de câble dédiée

  OMRON

  Sensor Terminal SRT2-□D08S Connector for dedicated cable connection
  

  à partir de∗ ：	7.62 €
  Délai de livraison minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Embase mâle avec broche à souder / série 734 qualité 2 / angle droit / pas de 3.5mm

  WAGO

  [Features]
  　● Can be horizontally mounted onto a printed circuit board using right-angle solder pins.
  　● Maximum rated current of 10 A is possible using a 1 x 1 mm pin.
  　● Use the male double-deck header to save installation space on the printed circuit board for more on-board connections.
  　● Completely prevents insertion errors
  　● An accessory coding key can be attached.

  à partir de∗ ：	2.71 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Embase mâle avec broche à souder / série 733 qualité 1 / droit / pas de 2.5mm

  WAGO

  [Features]
  　● Can be mounted perpendicularly to a printed circuit board using the solder pin.
  　●Total misinsertion error prevention: Only connectors with the same number of terminals may be latched.
  　● An accessory coding key can be attached.

  à partir de∗ ：	2.05 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Embase mâle avec broche à souder / série 733 qualité 1 / angle droit / pas de 2.5mm

  WAGO

  [Features]
  　● Can be horizontally or vertically mounted on a printed circuit board using a header with right angle solder pins.
  　● Model that makes incorrect insertion impossible: Only matches with the same number of terminals can be latched.
  　● An accessory coding key can be attached.

  à partir de∗ ：	1.87 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Embase mâle avec broche à souder / série 734 qualité 1 / droit / pas de 3.5mm

  WAGO

  [Features]
  　● Can be mounted directly to a printed circuit board using a solder pin.
  　● Maximum rated current of 10 A is possible using a 1 x 1 mm pin.
  　● Incorrect insertion is impossible.
  　● An accessory coding key can be attached.

  à partir de∗ ：	1.85 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Embase mâle avec broche à souder / série 734 qualité 1 / angle droit / pas de 3.5mm

  WAGO

  [Features]
  　● Can be horizontally mounted onto a printed circuit board using right-angle solder pins.
  　● Maximum rated current of 10 A is possible using a 1 x 1 mm pin size.
  　● Incorrect insertion is impossible.
  　● An accessory coding key can be attached.

  à partir de∗ ：	1.85 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Embase mâle avec broche à placer / série 734 / droit / pas de 3.5mm

  WAGO

  [Features]
  ● Can be mounted perpendicularly to a printed circuit board using a solder pin.
  ● A maximum rated current of 10 A is possible using a 1 x 1 mm pin size.
  ● Model that completely prevents insertion errors
  ● An accessory coding key can be attached.

  à partir de∗ ：	4.74 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Embase mâle avec broche à souder / série 734 qualité 1 / droit / pas de 3.81mm

  WAGO

  [Features]
  　● Can be mounted directly to a printed circuit board using a solder pin.
  　● A maximum rated current of 10 A is possible using a 1 x 1 mm pin size.
  　● Model that makes incorrect insertion impossible
  　● An accessory coding key can be attached.

  à partir de∗ ：	1.85 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Embase mâle avec broche à souder / série 734 qualité 1 / angle droit / pas de 3.81mm

  WAGO

  [Features]
  　● Can be horizontally mounted onto a printed circuit board using right-angle solder pins.
  　● Maximum rated current of 10 A is possible using a 1 x 1 mm pin size.
  　● Incorrect insertion is impossible.
  　● An accessory coding key can be attached.

  à partir de∗ ：	1.85 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur à ressort série WINSTA MINI-890

  WAGO

  Wire sizes of between 0.25 and 1.5 mm2. As with the 770 series, the panel penetration fittings, branches, etc. are included in the lineup, and connections can be made easily using the 890-392 or 890-393 tool.

  à partir de∗ ：	3.45 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Nouveau connecteur à ressort 770 avec couvercle de logement

  WAGO

  The new spring connector 770 with cover and a lineup is intended for 3-way, 4-way, and 5-way male and female connections.

  à partir de∗ ：	6.64 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Nouveau connecteur à ressort 770 (WINSTA), deux connexions (transférables)

  WAGO

  Two of the new 770 series spring connectors can be connected.

  à partir de∗ ：	4.17 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Micro-connecteur et série MC【50-100 pièces par conditionnement】

  WAGO

  A single, thin-wire telephone line connector is optimal for use with wire diameters from 0.5 to 1.0 mm, fire alarms, and intercoms.

  • Remise sur volume

  à partir de∗ ：	30.95 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteurs d'éclairage et série LC【1-101 pièces par conditionnement】

  WAGO

  This is a connector that can make one-touch connections without the need for tools, even for the Wago standard, single lines, or bunched lines. The connector also conforms to PSE.

  • Remise sur volume

  à partir de∗ ：	2.83 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteurs simple pression, série WF【8-50 pièces par conditionnement】

  WAGO

  Connections with bunched wires (0.08～3.5 mm2) or single wires (φ0.65～2mm) can be made just by pulling a lever. The toolless use concept is now widely employed.
  ●WF-2BP and WF-3BP are blister pack products. WF-2BP: includes 10, WF-3BP: includes 8

  • Remise sur volume

  à partir de∗ ：	8.24 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur de type à ressort, série 733, pas de 2.5mm, femelle

  WAGO

  The male side can be connected to 733-200 series connectors with the female side of the mini type spring connector. The corresponding circuit board can be connected to 733-300 series connectors. Maximum wire size is 0.5 mm2.

  à partir de∗ ：	3.03 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur de type à ressort, série 733, pas de 2.5mm, femelle - compact et optimisé pour les connexions de capteur.

  WAGO

  Male side can be connected to 733-200 with the female side of a spring-type connector, and the corresponding circuit board can be connected to 733-300 series connectors. The connector is ideal for sensor wires since it is very compact.

  à partir de∗ ：	3.40 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur de type à ressort, série 733, pas de 2.5mm, mâle

  WAGO

  The female side can be connected to 733-100 series connectors with the male side of a mini type spring connector. Maximum wire size is 0.5 mm2. The connectors may also be used to connect to sensor wires, etc.

  à partir de∗ ：	3.22 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur de type à ressort, série 734, pas de 3.5mm, femelle

  WAGO

  Male side can be connected to 734-300 with the female side of a spring type connector, and the corresponding circuit board can be connected to 734-100 and 400 series connectors. The connector is ideal for sensor wires since it is very compact.

  à partir de∗ ：	2.97 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur de type à ressort, série 734, pas de 3.5mm, femelle - connecteur compact

  WAGO

  The male side can be connected to 734-300 series connectors with a female side spring type connector using a screw, and the corresponding circuit board can be connected to 734-100 and 400 series connectors. It is a very compact connector.

  à partir de∗ ：	4.74 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur de type à ressort, série 734, pas de 3.5mm, connecteur femelle avec mécanisme de verrouillage

  WAGO

  A Wago 734 Series female spring-type connector with locking mechanism to enable male-side connection to the 734–300 Series connectors. Compatible boards: 734–100/400 Series. An extremely compact connector.

  à partir de∗ ：	3.35 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur de type à ressort, série 734, pas de 3.81mm, femelle

  WAGO

  The male side can be connected to 734-300 series connectors with the female spring connector side using a lock mechanism, and the corresponding circuit board can be connected to 3.81 mm pitch 734-200 series/400 series connectors.

  à partir de∗ ：	4.60 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur de type à ressort, série 734, pas de 3.81mm, femelle - connecteur compact

  WAGO

  The male side can be connected to 734-300 series connector with the female side of a spring type connector, and the corresponding circuit board can be connected to 3.81 mm pitch 734-200 series/400 series connectors. It is a very compact connector.

  à partir de∗ ：	2.97 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur de type à ressort, série 734, pas de 3.5mm, mâle

  WAGO

  The female side can be connected to 734-100 series connectors along with the male side of the mini type spring connector. MAX wire size is 1.5 mm2

  à partir de∗ ：	3.33 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur de type à ressort, série 734, pas de 3.5mm, connecteur mâle avec collier de fixation à vis

  WAGO

  Female side can be connected to 734-100 series connectors with the male side of a mini spring-type connector. MAX wire size is 1.5 sq.mm.

  à partir de∗ ：	3.59 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Connecteur de type à ressort, série 734, pas de 3.5mm, connecteur mâle de type à pied encliquetable (butée à trou)

  WAGO

  Female side can be connected to 734-100 (3.5 mm pitch) with the male side of a spring type connector with mini screw fixing flange. Snap-in foot (hole stop) type.

  à partir de∗ ：	3.33 €
  Délai de livraison minimum ：	4 jours

  *Prix unitaire/configuration de base

Loading...