Couronnes de perçage（Shank Type：Tige droite Page 2）

?* À propos du délai d'expédition et des prix

• 

  Foret Aqua EX avec trou d'huile 25D AQDEXOH25D

  NACHI(FUJIKOSHI)

  [Features]
  · Drill capable of wet machining and MQL machining.
  · For highly-efficient hole drilling up to 25 times the drill diameter.
  

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	201.65 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Aqua NWDX 4D

  NACHI(FUJIKOSHI)

  [Features]
  · Capable of stable drilling of general steel, stainless steel, etc. thanks to its excellent cutting balance.
  

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	378.75 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret plat SG SGEZ

  NACHI(FUJIKOSHI)

  [Features]
  · Multifunctional large diameter flat drill used for counterboring on inclined surfaces, tap blind holes, etc.
  

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	114.97 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret AG Power type semi-long AGPSLSD

  NACHI(FUJIKOSHI)

  [Features]
  · Adopts AG coating with excellent wear resistance to realize a longer life.
  · Chip-flow is improved while maintaining rigidity thanks to its non-stepped slot shape.
  

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	15.38 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  TiAlN Coated Carbide Drill with Corner Radius, Straight Shank / Stub Model, Regular

  MISUMI

  A straight shank type of drill with corner radius

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	34.34 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Straight Shank / Stub, Regular Model

  MISUMI

  Straight shank series of the popular high-speed and high-feed machining drill

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	31.36 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  TiAlN Coated Carbide Drill, Straight Shank / Stub Model

  MISUMI

  Standard high-quality carbide drill is available at affordable price

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	17.78 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  TiAlN Coated Carbide Drill, Straight Shank / Regular

  MISUMI

  High-speed cutting is supported with the use of the TiAlN coating.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	19.15 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Carbide Drill, Straight Shank / Regular

  MISUMI

  A general-purpose carbide drill that supports a wide range of applications.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	10.85 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  TiAlN Coated Carbide Long Drill, Straight Shank

  MISUMI

  Carbide long drill that achieves the high efficiency deep-hole drilling

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	84.13 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  TS Coated Carbide Drill for High-Hardness Steel Machining, Straight Shank / Stub, Regular

  MISUMI

  Straight shank type of the popular high-hardness steel series

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	46.10 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Carbide Stepped Drill, for Drilling Pilot Holes for Screws, with Chamfering Blade, Size Designation Model

  MISUMI

  The desired stepped drill can be ordered without a drawing. Delivered in a short delivery time

  Sélectionner et comparer

  › Configurer maintenant
  Délai d'expédition minimum ：	12 jours

• 

  TiAlN Coated Carbide Stepped Drill, For Bolt Drilling / For Drilling Pilot Holes for Screws, with Chamfering Blade

  MISUMI

  The stepped drill reduces the number of steps to achieve the high efficiency in drilling

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	70.32 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  DLC Coated Carbide Stepped Drill for Aluminum Machining, Stub

  MISUMI

  Reduction of the number of steps achieves high efficiency in drilling pilot holes

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	94.39 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  TiN Coated High-Speed Steel Drill for Stainless Steel Machining, Straight Shank / Stub, Regular Model【5-10 pièces par conditionnement】

  MISUMI

  Excellent processing performance and durability for the processing of stainless steel

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	44.16 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  TiN Coated High-Speed Steel Drill for Machining Difficult-to-Cut Materials, Straight Shank / Long

  MISUMI

  A long type of the popular drill for difficult-to-cut materials

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	15.11 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  TiN Coated High-Speed Steel Drill, Straight Shank / Regular【5-10 pièces par conditionnement】

  MISUMI

  Carefully selected frequently used 48 sizes are assorted at low prices

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	19.26 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  High-Speed Steel Drill, Straight Shank / Regular【5-10 pièces par conditionnement】

  MISUMI

  Carefully selected frequently used sizes are offered at low prices

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	7.16 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  High-Speed Steel Drill, Straight Shank / Regular【1-10 pièces par conditionnement】

  MISUMI

  Standard drills are packed for the greater value

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	6.75 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  High-Speed Steel Drill, Straight Shank / Long

  MISUMI

  A long drill that's loaded with functionality for a wide range of processing applications

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	7.46 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Foret Aqua, 3 cannelures AQD3F

  NACHI(FUJIKOSHI)

  3-flute carbide drill capable of high-precision drilling and reamer-less processing.
  [Features]
  · High-precision drilling is possible due to the 3-flute cutting edge excellent in cutting balance. It also supports reamer-less processing.
  · Aqua Drill 3-Flute has a proprietary thinning shape and good sharpness for minimal cutting resistance.
  · Highly lubricating aqua coating and groove shape for excellent chipping discharge without clogging, enabling consistent hole drilling.
  [Applications]
  · High-precision drilling is made possible by the 3-flute cutting edge with excellent cutting balance and negative corner with high centrality.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	30.27 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Aqua EX avec trou d'huile 5D AQDEXOH5D

  NACHI(FUJIKOSHI)

  Aqua Drill EX series solid carbide drills with internal coolant.
  [Features]
  · Product lineup is for 3D, 5D and 8D boring depths.
  · Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.
  · Aqua EX coating achieves stable long life.
  · Capable of stable wet processing and MQL processing.
  · For highly-efficient hole drilling up to 5 times the drill diameter.
  [Applications]
  · Ideal for stable processing of mild steel to high hardness materials, as well as work materials with difficult chip processing.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	95.10 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Aqua type standard AQDR

  NACHI(FUJIKOSHI)

  A carbide drill that demonstrates outstanding performance in dry processing and high speed wet processing.
  [Features]
  · Adopts Aquacoat with excellent heat resistance and rich lubrication with the work material.
  · Aqua coating and groove shape for excellent chipping discharge, enabling consistent hole drilling.
  · Chipping resistance and corner abrasion resistance are improved due to the special cutting edge shape.
  · High-speed wet machining is 2 to 3 times that of other companies' products, with dry machining efficiency equal to or greater than that of wet machining.
  [Applications]
  · Ideal for high-speed and long-life machining for anything from raw materials to high-hardness steel.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	112.13 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Aqua avec lame inférieure, 3 cannelures AQDED3F

  NACHI(FUJIKOSHI)

  Coated carbide drill which achieves high efficiency machining of holes in cast materials and screw pilot holes.
  [Features]
  · Cast iron and aluminum cast parts have a high performance machined hole with H7 precision.
  · 3-flute cutting edge with excellent cutting balance minimizes cutting vibration during machining.
  · Finish processing is possible with work efficiency of 10 times or more compared to a reamer.
  [Applications]
  · 3-flute cutting edge with excellent cutting balance ideal for high-quality machining.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	79.43 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret à tige droite en cobalt COSD

  NACHI(FUJIKOSHI)

  A general-purpose cobalt drill that can handle anything from steel to stainless steel.
  [Features]
  · Consistent drill bite due to the X-type thinning.
  · Sharpness is increased by reinforcing the drill torsion angle.
  · White surface less than 2.0 mm in diameter (not colored).
  [Applications]
  · Can be used for a wide range of materials, from steel to stainless steel.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	48.30 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Jeu de forets à tige droite SD

  NACHI(FUJIKOSHI)

  A general-purpose HSS drill which is used for the widest range of applications.
  [Features]
  · Corresponds to the JIS standard.
  [Applications]
  · Usable in a wide range of applications.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	2.98 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Foret AG-ES AGES

  NACHI(FUJIKOSHI)

  Coated high-speed drill that realizes high speeds and high feed rates approaching that of carbide drills.
  [Features]
  · New AG coating with excellent heat resistance and abrasion resistance is the best match for next generation high alloy high-speed steel.
  · 50C type capable of high-speed machining at a cutting speed of 60 m/min.
  · Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum.
  · The next generation of high alloy steel HSS achieves both anti-chipping performance and friction resistance performance.
  [Applications]
  · Also convenient for lathes where stable machining of carbide is difficult and low-rigidity processing machines.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	12.36 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret DLC HSS DLCHD

  NACHI(FUJIKOSHI)

  High-speed drill for high efficiency machining of aluminum alloys.
  [Features]
  · It utilizes DLC coating (diamond-like carbon) with high hardness, a low coefficient of friction and abrasion resistance.
  · Has low adhesion and eliminates troubles such as chip clogging which are likely to occur in aluminum processing.
  [Applications]
  · The coefficient of friction is small, and since the aluminum is unlikely to weld, high friction efficiency with aluminum alloys is demonstrated.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	6.47 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret G type court GSS

  NACHI(FUJIKOSHI)

  Short type straight shank drill with a TiN coated surface.
  [Features]
  · The original thinning shape (3-rake) improves centripedality and chip separation.
  · TiN coating achieves longer life.
  [Applications]
  · Capable of high efficiency machining of materials ranging from steel to stainless steel and aluminum. High positional accuracy can be obtained.

  • Remise sur volume

  • Stock

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	7.78 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Foret SG-ES SGES

  NACHI(FUJIKOSHI)

  HSS drill of the highest quality featuring a long service life, with high-grade powder HSS and SG coating.
  [Features]
  · High-grade powdered high-speed steel and SG coating allows the HSS drill to have the longest life possible.
  · Optimized cutting edge, groove shape and high precision achieve stable processing and high hole positioning accuracy.
  · Achieves high-efficiency machining based on high speed and high feed.
  · Allows high-speed, high-efficiency machining up to mold steel and aluminum.
  * Cannot be used for austenitic stainless steel.
  [Applications]
  · Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum, enabling high precision drilling.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	12.36 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Aqua EX type standard AQDEXR

  NACHI(FUJIKOSHI)

  Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.
  [Features]
  · Shape of the new cutting edge greatly improves chip discharge performance.
  · The cutting resistance is reduced to provide stable machining even on small machines.
  · A special lubrication function film is provided on the surface layer of the AlCrSi coating.
  · Longer life by improving lubricity and heat/abrasion resistance.
  · The unique thinning shape increases biting and reduces cutting resistance.
  [Applications]
  · Ideal for thin work materials and small low-rigidity processing machines.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	89.32 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Aqua FC AQDFC

  NACHI(FUJIKOSHI)

  A carbide drill with an optimum design for FC materials that provides a longer service life than conventional products.
  [Features]
  · Combination of cemented carbide ideal for FC material and Aquacoat with excellent heat and wear resistance.
  · Longer life than conventional FC drills.
  · The special cutting edge treatment suppresses wear of the corners most easily damaged in FC processing.
  · A lifetime of 70% of that of new products is guaranteed after re-grinding, even if there is no recoating.
  [Applications]
  · Ideal for long life machining of FC, FCD, and low carbon steel.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	89.84 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret G avec trou d'huile GOH

  NACHI(FUJIKOSHI)

  General purpose coated oil hole drill.
  [Features]
  · The original thinning shape (3-rake) improves centripedality and chip separation.
  · TiN coating and internal lubrication provide a cooling effect that results in a long D lifetime.
  [Applications]
  · Capable of high efficiency machining of materials ranging from steel to stainless steel and aluminum.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	857.10 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret G type long GLSD

  NACHI(FUJIKOSHI)

  Coated drill for deep holes.
  [Features]
  · It discharges chips well, making it ideal for drilling deep holes and deep positions.
  · Chip-flow is improved while maintaining rigidity thanks to its non-stepped slot shape.
  · TiN coating adopted to achieve a longer life even for deep holes.
  [Applications]
  · It discharges cutting chips well even for deep holes, enabling high-efficiency machining.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	42.24 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Foret Aqua EX type extra-court AQDEXS

  NACHI(FUJIKOSHI)

  Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.
  [Features]
  · Shape of the new cutting edge greatly improves chip discharge performance.
  · The cutting resistance is reduced to provide stable machining even on small machines.
  · A special lubrication function film is provided on the surface layer of the AlCrSi coating to improve the lubricity, heat resistance and abrasion resistance, thereby prolonging the service life.
  [Applications]
  · The unique thinning shape increases biting and reduces cutting resistance.
  · Stable cutting performance even with thin work materials and small low-rigidity processing machines.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	85.93 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Aqua EX avec trou d'huile 3D AQDEXOH3D

  NACHI(FUJIKOSHI)

  Aqua Drill EX series solid carbide drills with internal coolant.
  [Features]
  · Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.
  · Aqua EX coating achieves stable long life.
  [Applications]
  · Stable processing of mild steel to high hardness materials.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	95.94 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Aqua type extra-court AQDS

  NACHI(FUJIKOSHI)

  A carbide drill that demonstrates outstanding performance in dry processing and high speed wet processing.
  [Features]
  · Adopts Aquacoat with excellent heat resistance and rich lubrication with the work material.
  · Aqua coating and groove shape for excellent chipping discharge, enabling consistent hole drilling.
  · Chipping resistance and corner abrasion resistance are improved due to the special cutting edge shape.
  · High-speed wet machining is 2 to 3 times that of other companies' products, with dry machining efficiency equal to or greater than that of wet machining.
  [Applications]
  · Ideal for high-speed and long-life machining for anything from raw materials to high-hardness steel.
  · Drill for dry machining.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	72.39 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  En carbure type extra-long avec trou de graissage pour moules métalliques haute dureté FTO-H-GDXL

  OSG

  Achieves 20D deep drilling of high hardness mold materials (45 to 55 HRC) with high stability, long life, and high efficiency

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	227.50 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  En carbure pour acier haute dureté, 3 cannelures, type à long cou FHL-GDTS

  OSG

  Enables highly accurate machining of ultra-deep holes of 10 to 20 D in hardened steel which conventionally was only possible via electric discharge machining, realizing a great reduction in total drilling time.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	67.60 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret en carbure ultra-robuste avec trou d'huile, pour cuivre / aluminium CAO-GDXL

  OSG

  Steplessly processes super deep holes of 15D to 30D. Gun drill and HSS drill that achieves several times higher machining efficiency and tool service life

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	292.50 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  HSS type extra-long type 15D TDXL15D

  OSG

  HSS Drill for Machining Extra-Deep Holes Up to 15 D

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	27.90 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  HSS type extra-long type 20D TDXL20D

  OSG

  HSS Drill for Machining Extra-Deep Holes Up to 20 D

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	33.50 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Type moyen pour usinage général EX-GDN

  OSG

  The groove length is between the stubby and regular sizes and achieves non-step high speed machining up to 4 times the diameter, even for small diameters

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	21.63 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Type standard pour usinage général EX-GDR

  OSG

  High-versatility type capable of non-step high-speed machining of up to 4 to 5 times the diameter

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	58.20 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Longue tige type extra-court pour usinage général EX-LS-GDS

  OSG

  Suitable for machining parts adjacent to horizontal machinery, walls, and jigs, where good reach is required.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	18.61 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

Loading...