Porte-tarauds（Spindle types：BT50）

?* À propos du délai d'expédition et des prix

• 

  Cône de type SKB série CA

  KATO MFG

  [Features]
  · For Processing Machines with High Synchronization Accuracy
  · Supports center through coolant
  · Ideal for high speed tapping
  · Range of Work Expanded with Short Body

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	213.50 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Cône de type ECP série CA

  KATO MFG

  [Features]
  · Eliminates concerns about synchronization errors
  · Thin pencil type
  · Function is limited to tension (shallow screw set prevention)
  · In combination with a TCA-S collet, it is the same length as a conventional SA-III type tapper, and so can be replaced without having to change the program.
  · Tension prevents chipping, etc. even in difficult-to-machine materials

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	344.06 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Cône de type HA-M série SA

  KATO MFG

  [Features]
  · For Synchronization Control Processing Machines
  · Supports high speed tapping
  · Range of Work Expanded with Short Body
  · Unlike the spring collet, tap attachment and detachment can be performed in a single action
  · Remeasurement of tool length after tap replacement is unnecessary

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	338.91 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Cône de type HA-M-OHC série SA

  KATO MFG

  [Features]
  · HA-M type that supports center through coolant
  · Characteristics and specifications conform to the HA-M type
  · The flange through oil hole type (-OHF) is available upon order
  · Unlike the spring collet, tap attachment and detachment can be performed in a single action
  · Remeasurement of tool length after tap replacement is unnecessary
  · The standard specification uses the TC-MO with feed pump pressures up to 2 MPa.
  · Use the TC-MO-SB to handle feed pump pressures up to 5 MPa.
  · Also Supports Mist Specifications

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	349.71 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Cône de type BT-SA-III série SA (foret conique de type poignée de bouteille)

  KATO MFG

  [Features]
  · Best-selling "Kato Tapper"
  · Sizing type screw depth built-in limiting device
  · Tapper that works with all machinery, workpieces, and cutting conditions
  · Ideal for machining valuable workpieces such as prototypes, single articles, molds, etc.
  · The specifications, such as the strength of the spring and extension/contraction amount, can be changed to match the usage conditions.
  · The expansion device absorbs feed errors to realize high thread accuracy

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	700.10 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Cône de type BT-SA-IIS série SA (foret conique de type poignée de bouteille)

  KATO MFG

  [Features]
  · Machining Tapper with the World's Shortest Design
  · Designed with an ultra-short body, it is ideal for narrow work spaces such as five-surface machine tools, turning centers, etc.
  · Expansion Device to Absorb Feed Errors

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	701.65 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  DAISHOWA SEIKI Outil de taraudage automatique / Type B

  BIG KAISER

  [Features]
  · Simple, compact and low priced.
  The variation of the depth of the tap can be kept at ±0.15 mm and is ideal for work done with pipe taps and blind-hole tapping.
  A best seller from the Auto Tapper series.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	367.97 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Porte-taraud Mega synchronisé (foret BBT)

  BIG KAISER

  [Features]
  · Thrust load caused by synchronization error is reduced to 1/10 to improve thread precision and tap longevity.
  · In addition to various tap sizes, the long tap holder is standardized.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	310.92 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Porte-taraud Mega synchronisé (taraud grand diamètre pour MGT36)

  BIG KAISER

  [Features]
  · Compensates for axial misalignment due to synchronization error, and dramatically reduces load during machining.
  · Structure smoothly complies even with excessive cutting torque of large diameter taps.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	677.08 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Porte-taraud à foret BT

  YUKIWA SEIKO

  Torque control that boasts outstanding durability. Revolutionary. Double Roller Clutch Mechanism

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	401.83 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Mandrin de cône à ajustement automatique

  NIKKEN KOSAKUSHO

  [Features]
  · Ideal for gas taps, taps with a base, and lightweight alloys. When the machine forward feed is stopped at a designated point, the tap will continue for the set amount only (4 mm for ZL12 type) before idling.
  · Simply reverse it afterwards to align the tap depth at high precision.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	261.76 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Mandrin de cône

  NIKKEN KOSAKUSHO

  [Features]
  · A tapper ideal for interactive machining centers.
  · Enables safe and reliable tapping, with stable torque and slim design that further improve ease of use.
  · Unmanned operation-orientated tap holding system (PAT).
  · No deflection, detachment, or breakage.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	275.65 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Porte-taraud pour dispositif de synchronisation ancien modèle

  NIKKEN KOSAKUSHO

  [Features]
  · Former Synchro Tap Holder type.
  * Once the stock for this product runs out, sales will be discontinued. Thereafter, use the new ZH-C type.
  · Equipped with a small floating mechanism.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	263.78 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

Loading...