Clés dynamométriques（Torque adjustment range：10–50）

?* À propos du délai d'expédition et des prix

• 

  Clé dynamométrique à molette (paramétrage direct)

  MAEDAKINNZOKU

  Specialized monkey-type clamping torque wrench which does not damage the corners of bolts or nuts.
  [Features]
  · The lower jaw of the monkey wrench head part is better secured, and has a backlash-less worm function.
  · Digital-type torque setting for easy identification of displayed value.
  · In tightening work, when it reaches the set torque value, there will be a "clicking" sound or sensation to the hand.
  · Can be adjusted to any required sizes, metric or inch, or to square or irregular shapes of nuts and bolts.
  [Applications]
  · For piping of air conditioners, etc. and torque tightening for automobiles and motorcycles.
  · For optical fiber connector/exchanger mounting in communication facilities, as well as for anchor bolts on evacuation equipment in disaster prevention facilities, etc.
  · Wide type ideal for tightening non-ferrous/plastic nuts, etc. at low torque.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	295.56 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique Kanon de marquage (estampage), type N-MQLK

  NAKAMURA MFG

  [Features]
  · Never miss a place where bolts have not been tightened. The bolt head is marked "Pon". Commercially available socket-compatible type.
  · Since marking is done automatically, there is no need to perform marking work after tightening. Truly the last word in error-proofing.
  · Marking is performed after the completion of tightening, serving as "the evidence of proper tightening."
  · The torque wrench's socket supports one commercially available deep socket. (Note: Mounting hole machining is required.)
  · The ink used is an oil-based ink made by Shachihata, so the marks are non-erasable.
  · For each ink charge, sockets of 8 to 13 mm in size can be filled approximately 1,500 times. The 14-24 mm products allow marking approximately 6,000 times.
  · Red ink is included as an accessory.
  · Its simple structure makes maintenance easy
  · The accuracy is guaranteed up to ±3%.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	439.41 €
  Délai d'expédition minimum ：	22 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique à prédéfinition (définition en mémoire)

  MAEDAKINNZOKU

  Dedicated torque wrench for tightening bolts and nuts.
  [Features]
  · A digital type with easy-to-see numerical display that drastically reduces errors in torque setting.
  · In tightening work, when it reaches the set torque value, there will be a "clicking" sound or light "shock" to the hand.
  · Unlike conventional types, there is no need to read the main scale and Vernier scale, so it is convenient for preventing setting errors and confirmation/management of tightening torque.
  · Torque is set based on digitally displayed value of mechanical mechanisms which can be read directly.
  · Torque can be set by inserting a hex L-shape wrench into a configuration thread component in the rear of the wrench.
  [Applications]
  · Ideal for assembly, maintenance, and inspection of places requiring torque setting, such as for ports, electrical facilities, automobiles, heavy machinery, aircraft, etc.
  · Can be used for work ranging from assembly at industrial plants to maintenance of large trucks, automobiles, general industrial equipment and plants.
  · Ideal for various torque management tightening work.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	192.97 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique Kanon paramétrable à tête remplaçable, type N-LCK

  NAKAMURA MFG

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	130.06 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique à prédéfinition (paramétrage direct / constant)

  MAEDAKINNZOKU

  Tip socket is a holding type that prevents bits from falling out, as a torque wrench that dramatically decreases mistakes.
  [Features]
  · Equipped with a hold mechanism that prevents the socket from falling off and provides excellent operability.
  · In tightening work, when it reaches the set torque value, there will be a "clicking" sound or light "shock" to the hand.
  · Unlike conventional types, there is no need to read the main scale and Vernier scale, so it is convenient for preventing setting errors and confirmation/management of tightening torque.
  · Torque is set based on digitally displayed value of mechanical mechanisms which can be read directly.
  [Applications]
  · For assembly, maintenance and inspection at locations in high places where torque control is required.
  · Can be used for work ranging from assembly at industrial plants to maintenance of large trucks, automobiles, general industrial equipment and plants.
  · Ideal for various torque management tightening work.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	228.57 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique à prédéfinition (paramétrage direct)

  MAEDAKINNZOKU

  Dedicated torque wrench for tightening bolts and nuts.
  [Features]
  · Digital-type torque setting for easy identification of displayed value.
  · In tightening work, when it reaches the set torque value, there will be a "clicking" sound or a sensation to the hand.
  · Unlike conventional types, there is no need to read the main scale and Vernier scale, so it is convenient for preventing setting errors and confirmation/management of tightening torque.
  · Torque is set based on digitally displayed value of mechanical mechanisms which can be read directly.
  [Applications]
  · For assembly, maintenance, and inspection of places requiring torque setting, such as for ports, electrical facilities, automobiles, heavy machinery, aircraft, etc.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	193.07 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique préréglée avec poignée

  NAKAMURA MFG

  [Caractéristiques]
  · La poignée est munie d’un manche
  · Vous pouvez régler facilement le couple requis à la main.
  · Vous pouvez permuter des manchons avec la clé à vis, avec une variété de boulons et écrous.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	161.50 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique Kanon isolée, monofonction, type N-QSPK-CE

  NAKAMURA MFG

  [Features]
  · A special dual-layer design for the insulating material prevents accidents with electric shock.
  · A special dual-layer coating of insulating material protects the operator from electric shock.
  · Since the upper and lower layers of the dual-layer coating of insulating material have been color-coded, it is easy to see at a glance the extent of damage to the coating.
  · The withstand voltage is within 1,000 VAC.
  · Ideal for servicing, maintenance, and inspection of electric cars.
  · The insulated coating socket is also a custom order product.
  · The accuracy is guaranteed up to ±3%.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	235.36 €
  Délai d'expédition minimum ：	45 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique Kanon à verrouillage, paramétrable, type N-KQLK

  NAKAMURA MFG

  [Features]
  · The torque adjusting ring is secured using a dedicated tool. Torque value cannot be changed while working.
  · The torque value cannot be changed without a dedicated tool.
  · There are no torque value fluctuations during tightening work.
  · A ratchet type that enhances work efficiency and is suitable for repetitive work.
  · The accuracy is guaranteed up to ±3%.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	191.41 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Clé ouverte à crochet N-QLK

  NAKAMURA MFG

  [Features]
  · Preset type ideal for fastening nuts and round rods with a key groove.
  · Preset type torque wrench N-QLK with open wrench and hook wrench attached.
  · Ideal for fastening nuts and round rods with a key groove.
  · Also useful for setting the tooling to be used for machine tools and attaching blades.
  · Used for piping work and maintenance in thermal and nuclear power stations throughout Japan.
  · The accuracy is guaranteed up to ±3%.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	286.69 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique avec couplemètre de vérification QLLS / PQLLS

  TOHNICHI MFG

  [Features]
  · Torque wrench with wire-type limit switch.
  · The toggle operates when the set torque is attained, and a contact signal is output simultaneously from the limit switch.
  · Combined with the separately-sold count checker (CNA-4mk3), a fool-proofing system can be easily created.
  · Reading signals from the limit switch to a PLC, etc. and interlock with the line is used to establish a tightening assurance system.
  · LS cord uses a curled cord with excellent durability.
  · Can be securely used outside Japan, such as in the EU.
  · ISO 6789 Type II Class A calibration procedure compliant.
  [Applications]
  · Fail-safe (prevents omitted tightening)
  

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	318.75 €
  Délai d'expédition minimum ：	13 jours

  *Prix unitaire/configuration de base

Loading...