CHUO PRECISION INDUSTRIAL Supports pour éléments optiques

?* À propos du délai d'expédition et des prix

• 

  Support de caméra inclinable / rotatif B

  CHUO PRECISION INDUSTRIAL

  [Features]
  · IR-CB Tilting/Rotating Camera Holder B can be used to hold square shaped cameras up to 30 mm in size. It features dual-axis tilt adjustment and single-axis rotation adjustment capabilities.

  à partir de∗ ：	321.20 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Rail de type Y fin de petite taille

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A Y type aluminum rail.
  · Carriers (the C-211(- 1)P and C-211(- 2)P) can be used for X type rails as is.
  · Can be used with a lower optical axis than X types.
  · The spacing between the M6 counterbore holes for attaching to surface plates is 100 mm.
  · With a lever type magnet stand mounted using the M4 counterbore holes, it is possible to magnetically attach and fix to surface plates, etc.
  · Includes memory with scale.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	329.51 €
  Délai d'expédition minimum ：	20 jours

  *Prix unitaire/configuration de base

• 

  Rail de type X fin de petite taille

  CHUO PRECISION INDUSTRIAL

  [Features]
  · An X type aluminum rail.
  · Slides using a dedicated carrier.
  · Dedicated carriers (the C-211-(1)P and C-211-(2)P) can also be used for Y type rails as is.
  · Includes memory with scale.
  · Various stands and stages can be attached to the dedicated carriers (X type carriers C-211-(1)P and C-211-(2)P) using M16P1 screws, and M4 screws, etc.
  · X type rails can be fixed and retained using rail stands or T type carriers.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	140.23 €
  Délai d'expédition minimum ：	15 jours

  *Prix unitaire/configuration de base

• 

  Socle de rail de type X

  CHUO PRECISION INDUSTRIAL

  [Features]
  · An X type aluminum rail.
  · Slides using a dedicated carrier.
  · Dedicated carriers (the C-211-(1)P and C-211-(2)P) can also be used for Y type rails as is.
  · Includes memory with scale.
  · Various stands and stages can be attached to the dedicated carriers (X type carriers C-211-(1)P and C-211-(2)P) using M16P1 screws and M4 screws, etc.
  · X type rails can be fixed and retained using rail stands or T type carriers.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	224.21 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Support de miroir rond cinématique

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A three-point support type mirror holder.
  · The sample is fixed using set screws and a pad (round and square types only).
  · The set screw can be turned using a straight slot flathead screwdriver (not included). The round mirror holder is for circular optical devices. The tilt can be adjusted in the two axial directions.
  · The square mirror holder if for square optical devices. The tilt can be adjusted in the two axial directions.
  · The grooved mirror holder is for rectangular optical devices. The tilt can be adjusted in the two axial directions (square optical devices can also be used).

  Fichiers CAD 2D disponibles

  à partir de∗ ：	160.45 €
  Délai d'expédition minimum ：	16 jours

  *Prix unitaire/configuration de base

• 

  Support de miroir simple

  CHUO PRECISION INDUSTRIAL

  [Features]
  · The mirror holder fixes optical devices by affixing them. As such, it can be used with both circular and rectangular shaped objects.
  · A kinematic type in which the tilt can be adjusted using the inclined fulcrum (right-top) as a guide.
  · Available with a shaft (ø8 mm, length 60 mm) or with a base plate (long hole for M6 screws).

  Fichiers CAD 2D disponibles

  à partir de∗ ：	106.69 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Support de type rainuré

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A holder for mirrors and charts, etc. Insert the corresponding item into the groove and fix in place with a clamp screw.
  · Duracon® is inserted at the tip of the clamp screw and a fluoropolymer sheet is attached to the other side in order to avoid scratching of the clamped item.
  "Duracon®" is a registered trademark of Polyplastics Co., Ltd. in Japan and other countries.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	63.88 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Adaptateur

  CHUO PRECISION INDUSTRIAL

  [Features]
  · For changing the aperture to fit the holder when using a lens that does not fit

  Fichiers CAD 2D disponibles

  à partir de∗ ：	44.48 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Porte-lentilles de type en V

  CHUO PRECISION INDUSTRIAL

  [Features]
  · The HL-C30, HL-C70, and HL-C100 are lens holders with grooves for fixing lenses. There are three products available depending on the maximum size of the object that can be fixed.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	102.83 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Porte-lentilles cylindrique

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A lens holder with a groove for fixing cylindrical lenses.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	115.53 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Porte-lentilles

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A holder for circular lenses (can also be used with mirrors).
  · Metal frame and shaft only. Does not include a tilt adjustment function.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	123.36 €
  Délai d'expédition minimum ：	13 jours

  *Prix unitaire/configuration de base

• 

  Support de polariseur

  CHUO PRECISION INDUSTRIAL

  [Features]
  · The POH-30, POH-50 hold polarizing plates and wave plates and is used for the adjustment of polarizing surfaces, etc.
  · For devices such as Glan-Thompson prisms and wave plates with small external shapes, combine with an adapter for polarizer element holders.
  · When the coarse movement clamp is loosened, it can move coarsely over 360°. When the coarse movement clamp is tightened, it can perform fine adjustments on the micrometer head.
  · Since the scale ring moves independently, the zero point can be set to any angle.
  · The C-301- (1) is a holder for holding cube type prisms. It does not include a tilt adjustment function, etc.

  à partir de∗ ：	338.16 €
  Délai d'expédition minimum ：	15 jours

  *Prix unitaire/configuration de base

• 

  Supports de caméra

  CHUO PRECISION INDUSTRIAL

  [Features]
  · The HC-T3 is a product in which a ø12 mm shaft is attached to a free camera platform with tripod threads (nominal size 1/4)
  · The HC-T2N is a product in which a ø12 mm shaft is attached to a single-handle camera platform with tripod threads (nominal size 1/4).

  Fichiers CAD 2D disponibles

  à partir de∗ ：	115.67 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Jeu de bagues de pressage

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A Duracon® ring set consisting of a press ring and cushioning material.
  "Duracon®" is a registered trademark of Polyplastics Co., Ltd. in Japan and other countries.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	25.38 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Clé polygonale

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A ring wrench that uses bits.
  · Can be used with products that have slits in the press ring such as adapters, mirror holders, and lens holders.
  · The MHZ-1 is a fixed bit type. The range of use for the MHZ-2 can be increased by changing the position of the bit.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	38.36 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Mini support de rail

  CHUO PRECISION INDUSTRIAL

  [Features]
  · Rails with a cross-section of 20 mm × 10 mm. Used in the configuration of systems such as those for small optical parts and small equipment etc.
  · Use M6 screws to fix to surface plates etc.
  · There are two types of dedicated rail carrier available; large and small. Can be used with M6 and M2 screws, etc.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	38.17 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Support de rail type X

  CHUO PRECISION INDUSTRIAL

  [Features]
  · An X type aluminum rail.
  · Slides using a dedicated carrier.
  · Dedicated carriers (the C-211-(1)P and C-211-(2)P) can also be used for Y type rails as is.
  · Includes memory with scale.
  · Various stands and stages can be attached to the dedicated carriers (X type carriers C-211-(1)P and C-211-(2)P) using M16P1 screws, and M4 screws, etc.
  · X type rails can be fixed and retained using rail stands or T type carriers.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	96.64 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Petit support de prisme

  CHUO PRECISION INDUSTRIAL

  [Features]
  · HP-24 is a holder for holding cube type prisms. It does not include a tilt adjustment function, etc.

  à partir de∗ ：	160.60 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Support de prisme inclinable / rotatif

  CHUO PRECISION INDUSTRIAL

  [Features]
  · The IR-P1 tilting/rotating prism holder can be used with prisms up to 25 mm in size.
  · The IR-P1 tilting/rotating prism holder is a prism holder that features dual-axis tilt adjustment and single-axis rotation adjustment capabilities. It also features less protrusion from the main body than conventional types and can be used to install prisms without taking up space.

  à partir de∗ ：	321.46 €
  Délai d'expédition minimum ：	21 jours

  *Prix unitaire/configuration de base

• 

  Petit support de laser inclinable / rotatif

  CHUO PRECISION INDUSTRIAL

  [Features]
  · The IR-CL tilting/rotating laser holder is a laser holder that can be used for mounting small semiconductor lasers and base lasers. It also features dual-axis tilt adjustment and single-axis rotation adjustment capabilities to facilitate optical axis alignment.

  à partir de∗ ：	321.20 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

Loading...