GANTER Doigts diviseurs
Affiner la recherche en précisant Type
-
Bouton standard -
Type de levier -
Avec bague -
Composants associés -
Sans bouton -
Boutons spéciaux
?* À propos du délai d'expédition et des prix
-
- En promotion
Mini indexing plungers, covered indexing mechanism
GANTER
Mini indexing plungers GN 822 are distinguished for their small dimensions. They have been designed for installation in thin walled sheet metal constructions.
They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
With Type C the knob can be turned by 30° and a notch keeps the knob in this position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 5.36 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Cam action indexing plunger, Plunger pin retracted
GANTER
Cam action indexing plungers GN 712.1 are used in such applications where the plunger pin has to protrude only occasionally. When turning the cam by 90° resp. 120° degrees in clockwise direction, the plunger pin is moved through a curved opening in the body. After that, the plunger pin is protruded.
Depending on the type, the plunger pin is moved back by a spring in its original position (Type A), is held in protruded position (Type R), resp. is secured against accidental operation (Type S). In order to move the plunger pin, safety version Type S requires an additional pushing of the latch.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 25.62 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
- En promotion
Cam action indexing plungers, Stainless Steel
GANTER
Stainless Steel-Cam action indexing plungers GN 612 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A groove is provided in either position to prevent the lock from rotating.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 17.32 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Indexing plungers, Steel / Plastic-knob
GANTER
Indexing plungers GN 817 with rest position (Type C / CK) are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 7.80 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Indexing plunger, Steel / Plastic knob
GANTER
Type G or GK of the GN 617 indexing plungers have been designed for applications where the indexing plunger is not operated with the standard knob.
The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 8.86 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Indexing plungers with rest position, Steel / Plastic knob
GANTER
Indexing plungers GN 617.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted.
A notch keeps the plunger in this position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 10.48 € Délai d'expédition minimum ： 4 jours *Prix unitaire/configuration de base
-
Indexing plungers, Stainless Steel / plastic knob
GANTER
Type G or GK of the indexing plungers GN 613 have been designed for applications where the indexing plunger is not operated with the standard knob.
The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.
A special screw driver GN 613.1 is available. Two slots are provided in the upper end of the body which are accessible with the knob in its retracted position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 11.28 € Délai d'expédition minimum ： 3 jours *Prix unitaire/configuration de base
-
Indexing plungers, Steel / plastic knob
GANTER
Type G or GK of the GN 613 indexing plungers have been designed for applications where the indexing plunger is not operated with the standard knob.
The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.
A special screw driver GN 613.1 is available. Two slots are provided in the upper end of the body which are accessible with the knob in its retracted position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 7.60 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
- En promotion
Indexing plungers, Steel, with knob, with and without rest position
GANTER
GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 5.12 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Locking plungers, PUSH-PUSH locking mechanism
GANTER
The indexing pin in the locking plungers GN 514 is moved via a so-called cardioid mechanism.
This mechanism means that the indexing pin is both extended and retracted alone by pressing the operating button (PUSH-PUSH locking mechanism).
Please note that the indexing pin cannot absorb any axial forces and that it retracts virtually by spring action; the indexing pin must therefore remain free and easy to move.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 14.76 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Mini indexing plungers, covered indexing mechanism, with red knob
GANTER
Mini indexing plungers GN 822 are distinguished for their small dimensions. They have been designed for installation in thin walled sheet metal constructions.
They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
With type C the knob can be turned by 30° and a notch keeps the knob in this position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 5.36 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Mini indexing plungers, open indexing mechanism
GANTER
Mini indexing plungers GN 822.1 are distinguished for their small dimensions. They have been designed for installation in thin walled sheet metal constructions.
Type C with rest position is used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 5.40 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
- En promotion
Stainless Steel-Spring latches with flange for surface mounting
GANTER
Spring latches GN 722.3 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°. A lock notch will hold the latch in both positions.
Spring latches GN 722.3 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 31.88 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Cam action indexing plungers, Steel
GANTER
Cam action indexing plungers GN 612 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A groove is provided in either position to prevent the lock from rotating.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 14.22 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Indexing plungers with rest position, Plunger Steel
GANTER
Indexing plungers GN 608.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
Indexing plungers GN 608.1 are distinguished for their small dimensions. The locking tab is integrated into the knob thus giving reliable operation at all times.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 9.12 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Indexing plungers, Plunger Steel
GANTER
Indexing plungers GN 608 are distinguished for their small dimensions.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 8.62 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Indexing plungers, removable
GANTER
Indexing plungers GN 817.9 have been designed such that special versions of the indexing pins can also be made economically in smaller unit quantities.
If reqired, the indexing pins can be machined or made by the user as shown in the drawing above. They are assembled with a countersunk screw and can therefore be assembled several times. All parts are supplied in a non-assembled set.
The indexing plungers type C are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 14.82 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
- En promotion
Indexing plungers, Stainless Steel, with knob, with and without rest position
GANTER
GN 717 Stainless Steel-Indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 5.52 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Indexing plungers, Steel, with lifting ring / with wire loop, without rest posit
GANTER
GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 4.08 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Locking plungers, Plunger protruded
GANTER
If not operated, the plunger of the locking plungers GN 816 protrudes. To retract, move against the spring force and hold in the end position by turning by 90°.
The shape of the cam curve secures the plunger against accidental operation.
When operating the button (Type AR / ARK), the visible red covering sleeve indicates the locking status: Indexing pin does not protrude.
For the execution with operation with key (Type B / BK) a key is required to move the plunger. In this execution, a cover sleeve provides additional security and safety from unauthorized removal of the locking plunger. The cover sleeve also provides additional protection against malfunction caused by dirt.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 19.58 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Mini indexing plungers Zinc die casting / Plastic-knob
GANTER
Mini indexing plungers GN 822.8 are distinguished for their small dimensions. They are mounted by countersunk screws.
The mini indexing plungers present an affordable alternative to the GN 608 and GN 608.1 indexing plungers.
In type C, the button can be turned by 30° after retracting the indexing pin, holding it in the “retraced” position using the indexing lock.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 6.24 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Spring latches with flange for surface mounting
GANTER
Spring latches GN 722.2 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°. A lock notch will hold the latch in both positions.
Spring latches GN 722.2 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 13.78 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Spring latches with flange for surface mounting
GANTER
Spring latches GN 722.3 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°.
A lock notch will hold the latch in both positions.
Spring latches GN 722.3 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 15.46 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Stainless Steel-Indexing plungers
GANTER
The indexing plungers GN 617 are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 19.62 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Stainless Steel-Indexing plungers
GANTER
Stainless Steel-Indexing plungers GN 617.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 30.50 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Stainless Steel-Indexing plungers / Plastic knob
GANTER
Stainless Steel-Indexing plungers GN 817 with rest position (Type C / CK) are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 12.32 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Stainless Steel-Indexing plungers with T-handle
GANTER
Stainless Steel-Indexing plungers GN 817.4 are similar to GN 817, but with a T-handle instead of a round head.
This shape allows better visual orientation of the indexing position of Type C and is advantageous when greater unlocking forces occur.
Type C with rest position is used in such applications where the plunger must not protrude continually. In that case the knob is retracted and afterwards turned by 90°. A notch keeps the plunger in this position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 17.96 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Stainless Steel-Indexing plungers, removable
GANTER
Indexing plungers GN 817.8 have been designed such that special versions of the indexing pins can also be made economically in smaller unit quantities.
If reqired, the indexing pins can be machined or made by the user as shown in the drawing above. They are assembled with a countersunk screw and can therefore be assembled several times. All parts are supplied in a non-assembled set.
The indexing plungers type C / CK are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 17.90 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Cam action indexing plungers for welding
GANTER
Cam action indexing plungers GN 612.3 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A notch keeps the plunger in this position.
The square body can therefore be welded in any required position. In order to prevent a change in the spring load by the transferred heat we recommend spot welding the plunger body.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 20.90 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
- En promotion
Cam action indexing plungers with flange
GANTER
Cam action indexing plungers GN 612.10 are used in cases where the plunger must not protrude all the time. By rotating the lever through 180° the plunger withdraws itself. The notch allows safe positioning.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 10.12 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Cam action indexing plungers with flange
GANTER
Cam action indexing plungers GN 612.9 are used in cases where the plunger must not protrude all the time. By rotating the lever through 180° the plunger withdraws itself. The notch allows safe positioning.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 9.42 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Cam action indexing plungers, flange for surface mounting
GANTER
Cam action indexing plungers GN 612.2 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A notch keeps the plunger in this position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 32.48 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Cam action indexing plungers, Plunger pin protruded
GANTER
Cam action indexing plungers GN 712 are used in such applications where the plunger pin must not protrude continually. When turning the cam by 90° resp.120° degrees in anti-clockwise direction, the plunger pin is moved through a curved opening in the body. After that, the plunger pin is retracted.
Depending on the type, the plunger pin is moved back by a spring in its original position (Type A), is held in retracted position (Type R), resp. is secured against accidental operation (Type S).
In order to move the plunger pin, safety version Type S requires an additional lifting of the latch.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 24.32 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Cam action indexing plungers, Steel, with locking function
GANTER
The groove on GN 721.1 cam action indexing plungers ensures that the locking pin remains in its withdrawn position.
For opposing cam action indexing plungers the left or right-handed types allow practical use, that is the same setting of the lock.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 18.28 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Cam action indexing plungers, Steel, without locking function
GANTER
For GN 721 cam action indexing plungers the indexing plunger pin is withdrawn by turning the lock by 180°.
When the cam action indexing plungers are positioned symmetrically, the left or right handed types allow for a practical, i.e. equal, direction setting of the lock.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 18.30 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Cam action indexing plungers, Zinc die casting
GANTER
Cam action indexing plungers GN 612.8 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. The notch allows safe positioning.
These cam action indexing plungers made of die-cast zinc are very reasonably priced design versions.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 7.80 € Délai d'expédition minimum ： 3 jours *Prix unitaire/configuration de base
-
Clamping indexing plungers with safety function
GANTER
Clamping indexing GN 7336.8 plungers are an advanced development of the GN 7336.7 clamping knobs with indexing plunger.
Like the latter, they are used for positioning, securing and clamping adjusting elements at the same time. This configuration ensures that the indexing pin cannot be pulled from the indexing bore by turning the knurled knob, but only be deliberately pulling the handle (safety function).- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 26.18 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
- En promotion
Clamping knobs with indexing plunger
GANTER
Clamping knobs with indexing plunger GN 7336.7 are used for positioning, securing and clamping adjusting elements at the same time.
The axial movement of the handle (pulling) pulls the indexing pin from the engaged position against the spring force, with the star know at the same time remaining connected with form-lock to the clamping screw via a hexagonal element, allowing both clamping and releasing.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 8.56 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
à partir de∗ ： 3.16 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
- En promotion
Indexing plungers for precision locating
GANTER
Indexing plungers GN 817.3 realize a reasonable priced precision locating when guide bushes DIN 179 are used.
For this purpose a guide bush DIN 179 is used as guide, whereby the dimension l3 of the plunger determines the length of the bush.
The precise location is, therefore, not dependent on the guide pin in the plunger, but on the accuracy of the guide bush (bore tolerance F7) and the plunger (tolerance h7). Both components are hardened and ground. It goes without saying that the bush length also influences the accuracy of the positioning.
Type C is used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 27.02 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Indexing plungers for thin walled equipment
GANTER
Indexing plungers GN 607.2 have been developed for installation in thin walled equipment.
It has to be taken into consideration that, depending on the mounting plate thickness 's', the protruding plunger length 'l1' and the position of the hexagon nut on its centre bush, the plunger nose might not always be fully retractable.
For design reasons the positional accuracy of this indexing plunger is not as precise as plunger GN 607.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 17.36 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Indexing plungers for welding, with rest position
GANTER
Indexing plungers GN 607.5 with rest position are used in cases where the indexing pin is temporarily not allowed to protrude. After pulling out, the knob is turned by 90°.
A notch keeps the plunger in this position.
The GN 607.5 indexing plungers are intended for welded fixing, in particular for use in steel square tubings.
The lug d2 is intended for positioning.
The plastic knob with the in-moulded indexing pin is driven on after the welding process.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 15.66 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
- En promotion
Indexing plungers for welding, without rest position
GANTER
Indexing plungers GN 607.4 are designed for welded fixing, in particular for use in steel square tubings.
The lug d2 is intended for positioning.
The plastic knob with the in-moulded indexing pin is driven on after the welding process.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 14.96 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Indexing plungers with red knob
GANTER
Indexing plungers GN 817.1 (Type C) are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 10.42 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Indexing plungers with rest position, for thin walled equipment
GANTER
Indexing plungers GN 607.3 have been developed for installation in thin walled equipment.
It has to be taken into consideration that, depending on the mounting plate thickness 's', the protruding plunger length 'l1' and the position of the hexagon nut on its centre bush, the plunger nose might not always be fully retractable.
For design reasons the positional accuracy of this indexing plunger is not as precise as plunger GN 607.
Indexing plungers with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 20.32 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
| Marque |
|---|
| Série du produit |
| CAD |
| à partir de∗ |
| Délai d'expédition minimum ： |
| Type |
| Mécanisme de verrouillage |
| Méthode de montage |
| Longueur totale |
| Matériau du corps |
| Tout inoxydable |
| Matériau de l'embout |
| D.E. du corps / filetage M(mm) |
| Course S(mm) |
| Traitement de surface d'embout |
| Traitement thermique de l'embout |
| D.E. de l'embout d(Ø) |
| Longueur L(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Marque | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER |
| Série du produit | Indexing plungers, Steel, with knob, with and without rest position | Mini indexing plungers, covered indexing mechanism, with red knob | Stainless Steel-Spring latches with flange for surface mounting | Indexing plungers, Stainless Steel, with knob, with and without rest position | Indexing plungers, Steel, with lifting ring / with wire loop, without rest posit | Cam action indexing plungers, Steel, without locking function | Indexing plungers with rest position, for thin walled equipment | ||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| à partir de∗ | 5.36 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 25.62 € *Prix unitaire/configuration de base Remise sur volume | 17.32 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 7.80 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 8.86 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 10.48 € *Prix unitaire/configuration de base Remise sur volume | 11.28 € *Prix unitaire/configuration de base Remise sur volume | 7.60 € *Prix unitaire/configuration de base Remise sur volume | 5.12 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 14.76 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 5.36 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 5.40 € *Prix unitaire/configuration de base Remise sur volume | 31.88 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 14.22 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 9.12 € *Prix unitaire/configuration de base Remise sur volume | 8.62 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 14.82 € *Prix unitaire/configuration de base Remise sur volume | 5.52 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 4.08 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 19.58 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 6.24 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 13.78 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 15.46 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 19.62 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 30.50 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 12.32 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 17.96 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 17.90 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 20.90 € *Prix unitaire/configuration de base Remise sur volume | 10.12 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 9.42 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 32.48 € *Prix unitaire/configuration de base Remise sur volume | 24.32 € *Prix unitaire/configuration de base Remise sur volume | 18.28 € *Prix unitaire/configuration de base Remise sur volume | 18.30 € *Prix unitaire/configuration de base Remise sur volume | 7.80 € *Prix unitaire/configuration de base Remise sur volume | 26.18 € *Prix unitaire/configuration de base Remise sur volume | 8.56 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 3.16 € *Prix unitaire/configuration de base Remise sur volume | 27.02 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 17.36 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 15.66 € *Prix unitaire/configuration de base Remise sur volume | 14.96 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 10.42 € *Prix unitaire/configuration de base Remise sur volume | 20.32 € *Prix unitaire/configuration de base Remise sur volume |
| Délai d'expédition minimum ： | Jour même | 7 jours | Jour même | Jour même | Jour même | 4 jours | 3 jours | 7 jours | Jour même | Jour même | Jour même | 7 jours | Jour même | Jour même | Jour même | Jour même | 7 jours | Jour même | Jour même | Jour même | Jour même | Jour même | Jour même | Jour même | Jour même | Jour même | Jour même | Jour même | 7 jours | Jour même | Jour même | 7 jours | 7 jours | 7 jours | 7 jours | 3 jours | 7 jours | Jour même | 7 jours | Jour même | Jour même | 7 jours | Jour même | 7 jours | 7 jours |
| Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mécanisme de verrouillage | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Méthode de montage | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Longueur totale | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Matériau du corps | Acier / Acier inoxydable | - | Acier inoxydable | - | - | - | Acier inoxydable | - | Acier | - | Acier / Acier inoxydable | Acier / Acier inoxydable | Acier inoxydable | - | - | - | - | Acier inoxydable | Acier | - | - | Acier inoxydable | - | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | - | - | - | - | - | - | - | - | - | - | - | - | Acier | Acier | Acier | - | Acier |
| Tout inoxydable | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Matériau de l'embout | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| D.E. du corps / filetage M(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 16 ～ 20 | 16 ～ 20 | 16 ～ 20 | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Course S(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Traitement de surface d'embout | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Traitement thermique de l'embout | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| D.E. de l'embout d(Ø) | 4 ～ 7 | 6 ～ 8 | 4 ～ 12 | 4 ～ 16 | 5 ～ 10 | 5 ～ 10 | 5 ～ 10 | 5 ～ 10 | 3 ～ 10 | 6 ～ 8 | 4 ～ 7 | 4 ～ 7 | 8 ～ 14 | 4 ～ 12 | 6 ～ 8 | 6 ～ 8 | 7 ～ 10 | 3 ～ 10 | 3 ～ 10 | 6 ～ 10 | 4 ～ 10 | 8 ～ 14 | 8 ～ 14 | 5 ～ 10 | 5 ～ 10 | 4 ～ 16 | 6 ～ 12 | 7 ～ 12 | - | 6 ～ 12 | 6 ～ 12 | 6 ～ 12 | 6 ～ 10 | 5 ～ 10 | 5 ～ 10 | 4 ～ 12 | - | - | - | 6 ～ 10 | 6 ～ 8 | 6 ～ 8 | 6 ～ 8 | 6 ～ 10 | 6 ～ 8 |
| Longueur L(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filtrer par:
Stock
-
- Stock Items Included
Affiner la recherche en précisant les spéc./dim.
-
Mécanisme de verrouillage
-
Non fourni
-
Avec verrouillage
-
Sans verrouillage
-
Non fourni
-
Méthode de montage
- À visser
- Ajustement forcé
- Montage par boulon
- Autres
- Embase
-
Longueur totale
- Standard
- Court
-
Matériau du corps
- Acier
- Acier inoxydable
- Zinc moulé sous pression
- Autres
-
Tout inoxydable
- Applicable
- Non conforme
-
Matériau de l'embout
- Acier
- Acier inoxydable
-
D.E. du corps / filetage M(mm)
-
Course S(mm)
-
Traitement de surface d'embout
-
Traitement thermique de l'embout
-
D.E. de l'embout d(Ø)
-
Longueur L(mm)
Affiner la recherche en spécifiant le fabricant
-
- MISUMI (19)
- NORELEM (183)
- KIPP (142)
- GANTER (88)
- HALDER (37)
- NABEYA BI-TECH (25)
- KONISHI MFG (19)
- ELESA (4)
- NABEYA (1)
- TOSHIN CASTER (1)
Affiner la recherche en précisant le type de données CAO
-
- 2D
- 3D
Affiner la recherche en précisant le délai
-
- Tous les articles
- Jour même
- 2 jours ou moins
- 3 jours ou moins
- 4 jours ou moins
- 5 jours ou moins
- 6 jours ou moins
- 7 jours ou moins
- 8 jours ou moins
- 9 jours ou moins
- 11 jours ou moins
Catégories relatives à « Doigts diviseurs »
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.