GANTER Dispositifs de serrage à genouillère à maintien vertical
| Nombre de jours d'expédition |
|
|---|
?* À propos du délai d'expédition et des prix
-
Heavy duty vertical acting toggle clamps, with horizontal mounting base, „Longli
GANTER
GN 910 heavy duty vertical acting toggle clamps can accommodate an application-specific screw.
The steel sheet metal design of the clamp and lever arms is replaced by precision casting or die-forged components. The remaining steel sheet parts have been reinforced, and bearing pins and rivets are hardened and ground.
These vertical clamps are therefore suitable for applications in which substantial forces occur and in which a long service life is required.
During extensive testing, with trouble free function and under load, the clamp has withstood over one million opening and closing cycles.
Stepped side washers are included.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 159.78 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Heavy duty vertical acting toggle clamps, with vertical mounting base
GANTER
GN 813 heavy duty vertical acting toggle clamps are used for applications where a very high holding force is required, such as closing of foam molds.
These clamps have been designed for easy dismantling: i.e. the bearing pins are locked with circlips.
After dismantling the individual parts, they can be modified to suit individual applications.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 223.76 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Heavy duty vertical acting toggle clamps, with vertical mounting base „Longlife“
GANTER
GN 910.1 heavy duty vertical acting toggle clamps can accommodate an application-specific screw. The steel sheet design of the clamp and lever arms is replaced by precision or die-forged components. The remaining steel sheet metal parts have been reinforced, bearing pins and rivets are toughened and ground.
These vertical clamps are therefore suitable for applications in which substantial forces occur and in which a long service life is required.
During extensive testing, with trouble free function and under load, the clamp has withstood over one million opening and closing cycles.
Type B - clamping arm with slotted hole (sizes 220 and 440 mm) includes flanged washers.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 159.78 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
- En promotion jusqu’au 30/11/2024
Stainless Steel-Vertical acting toggle clamps with horizontal mounting base
GANTER
GN 810 vertical acting toggle clamps work according to the toggle principle: lever and clamping bar move in the same direction. In the clamped position the operating lever is in its vertical position.
Vertical acting toggle clamps in the U-bar version with two flanged washers (Type A) can accommodate an application specific clamping screw. A spindle assembly with neoprene rubber tip is also included for Type C.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 48.90 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Stainless Steel-Vertical acting toggle clamps with vertical mounting base
GANTER
GN 810.1 vertical acting toggle clamps work according to the toggle principle: lever and clamping bar move in the same direction. In the clamped position the operating lever is in its vertical position.
Vertical acting toggle clamps in the U-bar version with two flanged washers (Type B) can accommodate an application specific clamping screw. A spindle assembly with neoprene rubber tip is also included
for Type BC.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 48.66 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Vertical acting toggle clamps with dual flanged mounting base
GANTER
GN 812.1 vertical acting toggle clamps work according to the toggle principle: lever and clamping bar move in the same direction. In the clamped position the operating lever is in its vertical position.
They can be mounted in two planes via the dual flanged mounting base and require less space for the clamping action.
Vertical acting toggle clamps in the U-bar version with two flanged washers (Type AVF) can accommodate an application specific clamping screw. A spindle assembly with neoprene rubber tip is also included for Type CVF.
Type EVF version can either be utilized by welding the clasp which can then accommodate an application specific hold-down fastener component, or by utilizing the bar in conjunction with the GN 809 Clamp Mounts to hold the work piece in place.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 43.26 € Délai d'expédition minimum ： 4 jours *Prix unitaire/configuration de base
-
- En promotion jusqu’au 30/11/2024
Vertical acting toggle clamps with dual flanged mounting base
GANTER
GN 812 vertical acting toggle clamps work according to the toggle principle: lever and clamping bar move in the same direction. They can be mounted in two planes via the dual flanged mounting base and require less space for the clamping action because the clamping arm and the operating lever move in opposite directions.
Vertical acting toggle clamps in the U-bar version with two flanged washers (Type AV) can accommodate an application specific clamping screw. A spindle assembly with neoprene rubber tip is also included for Type CV.
Type EV version can either be utilized by welding the clasp which can then accommodate an application specific hold-down fastener component, or by utilizing the bar in conjunction with the GN 809 Clamp Mounts to hold the work piece in place.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 45.32 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion jusqu’au 30/11/2024
Vertical acting toggle clamps with horizontal mounting base
GANTER
GN 810 vertical acting toggle clamps work according to the toggle principle: lever and clamping bar move in the same direction. In the clamped position the operating lever is in its vertical position.
Vertical acting toggle clamps in the U-bar version with two flanged washers (Type A) can accommodate an application specific clamping screw. A spindle assembly with neoprene rubber tip is also included for Type C.
Type E version can either be utilized by welding the clasp which can then accommodate an application specific hold-down fastener component, or by utilizing the bar in conjunction with the GN 809 Clamp Mounts to hold the work piece in place.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 21.76 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Vertical acting toggle clamps with vertical mounting base
GANTER
GN 810.1 Vertical acting toggle clamps work according to the toggle principle: lever and clamping bar move in the same direction. In the clamped position the operating lever is in its vertical position.
Vertical acting toggle clamps in the U-bar version with two flanged washers (Type B) can accommodate an application specific clamping screw. A spindle assembly with neoprene rubber tip is also included for Type BC.
Type F version can either be utilized by welding the clasp which can then accommodate an application specific hold-down fastener component, or by utilizing the bar in conjunction with the GN 809 Clamp Mounts to hold the work piece in place.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 21.76 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Sauterelles, levier de commande vertical, mécanisme de verrouillage, mo horizontal
GANTER
- Remise sur volume
à partir de∗ ： 52.68 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Sauterelles acier inoxydable, levier d’actionnement vertical, mécanisme de verrouillage, wi
GANTER
- Remise sur volume
à partir de∗ ： 93.26 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Sauterelles, levier d’actionnement vertical, mécanisme de verrouillage, montage vertical
GANTER
- Remise sur volume
à partir de∗ ： 52.68 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
| Marque |
|---|
| Série du produit |
| CAD |
| à partir de∗ |
| Délai d'expédition minimum ： |
| Méthode de fixation |
| Force de serrage(N) |
| Matériau du corps |
| Taille de vis de serrage |
| Matériel de vis de serrage |
| Catégorie |
| Force de serrage (plage)(N)(N) |
| Type à embout à boulon |
| Réglage de la position de l'embout à boulon |
|
|
|
|
|
|
|
|
|
|
|
| |
| Marque | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER |
| Série du produit | Heavy duty vertical acting toggle clamps, with horizontal mounting base, „Longli | Heavy duty vertical acting toggle clamps, with vertical mounting base | Heavy duty vertical acting toggle clamps, with vertical mounting base „Longlife“ | Stainless Steel-Vertical acting toggle clamps with horizontal mounting base | Stainless Steel-Vertical acting toggle clamps with vertical mounting base | Vertical acting toggle clamps with dual flanged mounting base | Vertical acting toggle clamps with dual flanged mounting base | Sauterelles, levier de commande vertical, mécanisme de verrouillage, mo horizontal | Sauterelles acier inoxydable, levier d’actionnement vertical, mécanisme de verrouillage, wi | Sauterelles, levier d’actionnement vertical, mécanisme de verrouillage, montage vertical | ||
| CAD |
|
|
|
|
|
|
|
|
| |||
| à partir de∗ | 159.78 € *Prix unitaire/configuration de base Remise sur volume | 223.76 € *Prix unitaire/configuration de base Remise sur volume | 159.78 € *Prix unitaire/configuration de base Remise sur volume | 48.90 € Prix spécial *Prix unitaire/configuration de base En promotion jusqu’au 30/11/2024Remise sur volume | 48.66 € *Prix unitaire/configuration de base Remise sur volume | 43.26 € *Prix unitaire/configuration de base Remise sur volume | 45.32 € Prix spécial *Prix unitaire/configuration de base En promotion jusqu’au 30/11/2024Remise sur volume | 21.76 € Prix spécial *Prix unitaire/configuration de base En promotion jusqu’au 30/11/2024Remise sur volume | 21.76 € *Prix unitaire/configuration de base Remise sur volume | 52.68 € *Prix unitaire/configuration de base Remise sur volume | 93.26 € *Prix unitaire/configuration de base Remise sur volume | 52.68 € *Prix unitaire/configuration de base Remise sur volume |
| Délai d'expédition minimum ： | 7 jours | 7 jours | 7 jours | Jour même | 7 jours | 4 jours | Jour même | Jour même | 7 jours | 7 jours | 7 jours | 7 jours |
| Méthode de fixation | - | - | - | - | - | - | - | - | - | - | - | - |
| Force de serrage(N) | - | - | - | - | - | - | - | - | - | - | - | - |
| Matériau du corps | - | - | - | Acier inoxydable | Acier inoxydable | - | - | - | - | - | - | - |
| Taille de vis de serrage | - | - | - | - | - | - | - | - | - | - | - | - |
| Matériel de vis de serrage | - | - | - | - | - | - | - | - | - | - | - | - |
| Catégorie | - | - | - | - | - | - | - | - | - | - | - | - |
| Force de serrage (plage)(N)(N) | - | - | - | - | - | - | - | - | - | - | - | - |
| Type à embout à boulon | - | - | - | - | - | - | - | - | - | - | - | - |
| Réglage de la position de l'embout à boulon | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filtrer par:
Stock
-
- Stock Items Included
Affiner la recherche en précisant les spéc./dim.
-
Méthode de fixation
- Base de l'embase
- Base droite
- Base latérale
- IKOU
-
Force de serrage(N)
- 1–120
- 1–400
- 1–500
- 50
- 60
- 80
- 100
- 120
- 130
- 150
- 160
- 186
- 190
- 200
- 230
- 250
- 260
- 280
- 290
- 294
- 294-980
- 300
- 340
- 392
- 400
- 440
- 441
- 450
- 500
- 560
- 670
- 680
- 750
- 784
- 800-1500
- 882
- 890
- 900
- 910
- 980
- 1000
- 1000-3700
- 1078
- 1110
- 1470
- 1500
- 1560
- 1670
- 1780
- 1800
- 1960
- 2000
- 2205
- 2220
- 2250
- 2270
- 2500
- 2670
- 2700
- 2800
- 3000
- 3200
- 3332
- 3340
- 3400
- 3500
- 3600
- 3700
- 4000
- 4400
- 4450
- 4500
- 5340
- 5500
- 6230
- 7000
- 10000
- 11000
- 11100
- 17800
- 21916
- 22500
-
Matériau du corps
- Acier
- Acier inoxydable
- IKOU
-
Taille de vis de serrage
- M4
- M5
- m6
- M8
- M10
- M12
- 1/4
- 5/16
- 3/8
- 1/2
- 5/8
- N° 10
-
Matériel de vis de serrage
- Acier
- Acier inoxydable
- Nylon
- Acier + tampon en caoutchouc
-
Catégorie
- Corps principal
- Pièces secondaires
-
Force de serrage (plage)(N)(N)
- Jusqu'à 499
- 500 à 1049
- 1050 à 2259
- 2260 ou plus
- Variable
-
Type à embout à boulon
- Boulon avec caoutchouc
- Boulon en acier
- Boulon en acier inoxydable
- Boulon en nylon
- Écrous
- Non fourni
-
Réglage de la position de l'embout à boulon
- Non ajustable (fixe)
- Réglage de la glissière
Affiner la recherche en spécifiant le fabricant
-
- MISUMI (35)
- AMF (82)
- GOODHANDCLAMP (47)
- KAKUTA (44)
- KIPP (43)
- NORELEM (40)
- DESTACO (12)
- GANTER (12)
- FLECLAM (10)
- HALDER (5)
- SUPER TOOL (5)
- TUENKERS (3)
Affiner la recherche en précisant le type de données CAO
-
- 2D
- 3D
Catégories relatives à « Dispositifs de serrage à genouillère à maintien vertical »
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.