GANTER Unités de positionnement

?* À propos du délai d'expédition et des prix

• 

  Installation kits for position indicators

  GANTER

  The GN 296 installation kits are needed for mounting a position indicator on linear units. The installation kits comprise an adapter shaft and a torque support including attachment screws.
  Order mechanical position indicators GN 953 / GN 954 / GN 955 with a counter pitch that corresponds to that of the trapezoidal threaded spindle.
  For position indicators GN 9053 / GN 9054, the position indicator pitch is programmed.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	68.66 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Turret levers, Steel

  GANTER

  Turret levers GN 213 can also be supplied as standard with:
  Square DIN 79 V + Bore diameter
  Keyway DIN 6885 K + Bore diameter

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	41.36 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Adjustable Tenison levers, Stainless Steel

  GANTER

  Adjustable tension levers GN 212.5 have proved to be ideal whenever parts have to be clamped in a confined space or a particular lever position is re-quired. The threaded insert is connected with the hub via serrations which can be disengaged.
  Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever it will automatically re-engage.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	29.78 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Adjustable Tension levers, Stainless Steel

  GANTER

  Adjustable tension levers GN 212.5 have proved to be ideal whenever parts have to be clamped in a confined space or a particular lever position is required. The threaded insert is connected with the hub via serrations which can be disengaged.
  Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever it will automatically re-engage.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	29.52 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Adjustable tension levers, Steel

  GANTER

  Adjustable tension levers GN 212.3 have proved to be ideal whenever parts have to be clamped in a confined space or a particular lever position is required. The threaded insert is connected with the hub via serrations which can be disengaged.
  Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever it will automatically re-engage.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	19.20 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Control levers, Steel

  GANTER

  Control levers GN 223 can also be supplied as standard with:
  Square DIN 79 V + Bore diameter
  Keyway DIN 6885 K + Bore diameter

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	15.50 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Control levers, Steel

  GANTER

  Control levers GN 211 can be used in connection with indexing elements, grooves for angle limitations and such like due to their comparably big hub diameter.
  Spring plungers as well as indexing plungers can be used as indexing elements.
  Control levers GN 211 can also be supplied as standard with:
  Square DIN 79 V + Bore diameter
  Keyway DIN 6885 K + Bore diameter

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	16.80 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Indexing levers, Steel

  GANTER

  With indexing levers GN 215 shafts can be turned through a predetermined angle and positively locked. To index, lift the lever against spring pressure from serrations (one hand control).
  Limiting the indexing angle can be achieved with two dowels (sketch).
  The bushing is connected to the shaft via keyway.
  The location flange is bolted to the machine with two socket head cap screws (M 5).
  
  The lever, via the location pin, provides the connection between shaft and location flange.
  The serrations are protected from swarf and similar particles by the cover. This cover can be inserted by hand (elastic segments engage into a groove) and removed with a screw driver.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	98.86 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Installation kits for position indicators

  GANTER

  The GN 295 installation kits are needed for mounting a position indicator on linear units. The installation kits comprise an adapter shaft and a torque support including attachment screws.
  Order mechanical position indicators GN 953 / GN 954 / GN 955 with a counter pitch that corresponds to that of the trapezoidal threaded spindle.
  For position indicators GN 9053 / GN 9054, the position indicator pitch is programmed.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	35.60 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Installation kits for position indicators

  GANTER

  The installation kits GN 491.1 are required for the attachment of a position indicator to double tube linear actuators. They consist of an adapter shaft and, depending on the position indicator, a torque support including fixing screws.
  Mechanical position indicators GN 953 / GN 954 / GN 955 must be ordered so that the counter is aligned with the rising of the trapezoidal thread spindle.
  For the position indicators GN 9053 / GN 9054 the respective rising is set at the position indicator for every programming.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	16.88 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Stainless Steel-Tension levers

  GANTER

  Stainless Steel-Tension levers GN 212 are used as clamping element as well as operating levers.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	17.94 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Tension levers, Steel

  GANTER

  Tension levers GN 212 are used as clamping element as well as operating levers.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	14.48 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

Loading...