GANTER Montants doubles

?* À propos du délai d'expédition et des prix

• 

  Swivel clamp connector joints, Aluminium

  GANTER

  GN 284 swivel clamp connector joints are an assembly of the swivel clamp connectors GN 274 and GN 276.
  For the type with stepless adjustment (Type S) swivel clamp connectors with a centring step are used. Within the identical swivel width “b”, all bores „d1 / d2" can be combined as required.
  The clamping bores are mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	46.58 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Twistable two-way clamp mountings

  GANTER

  Twistable two-way clamp mountings GN 490 clamp the rods or tubes via a prism, allowing a greater Ø tolerance to be bridged. The pressure spring makes clamping and releasing easier.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	11.24 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Two-way clamp mountings, Aluminium

  GANTER

  The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 511 (see table of dimensions).

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	11.08 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Parallel clamp mountings, Aluminium

  GANTER

  The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 511 (see table of dimensions).

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	14.78 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Swivel clamp connector joints, Aluminium

  GANTER

  GN 283 swivel clamp connector joints are an assembly of the swivel clamp connectors GN 273 and GN 275. Since the swivel clamp connectors have an identical swivel width “b”, all bores “d1/d2” can be combined as required.
  The clamping bores are mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).
  

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	42.26 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Swivel clamp connector joints, Aluminium

  GANTER

  GN 285 swivel clamp connector joints are an assembly of two GN 275 swivel clamp connectors.
  Since the swivel clamp connectors have an identical swivel width “b”, all bores „d1/ d2“ can be combined as required.
  The clamping bores are mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	42.30 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Swivel clamp connector joints, Aluminium

  GANTER

  GN 286 swivel clamp connector joints are an assembly of two GN 276 swivel clamp connectors.
  For the type with stepless adjustment (Type S) swivel clamp connectors with a centring step are used. Within the identical swivel width „b”, all bores „d1/ d2” can be combined as required.
  The clamping bores are mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	47.70 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Swivel clamp connector joints, Aluminium

  GANTER

  GN 287 swivel clamp connector joints are an assembly of swivel clamp connectors GN 275 and GN 277.
  Since the swivel clamp connectors have an identical swivel width “b”, all bores “d1/d2” can be combined as required.
  The clamping bores are mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	42.30 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Swivel clamp connector joints, Aluminium

  GANTER

  GN 288 swivel clamp connector joints are an assembly of swivel clamp connectors GN 276 and GN 278.
  For the type with stepless adjustment (Type S) swivel clamp connectors with a centring step are used. Within the identical swivel width “b”, all bores “d1/d2” can be combined as required.
  The clamping bores are mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).
  

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	47.68 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Swivel clamp connector joints, two-part clamp pieces

  GANTER

  GN 289 swivel clamp connector joints are an assembly of two GN 279 swivel clamp connetors.
  The clamping bores of GN 289 swivel clamp connector joints are not machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The swivel clamp connectors have an identical swivel width “b”, so that all bores „d1/s1" und „d2/s2“ can be combined as required.
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (see table of dimensions).

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	103.68 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  T-Clamp mountings, Aluminium

  GANTER

  The T-Clamp mountings GN 476 (Type W) are an alternative to twistable two-way clamp mountings GN 475 if high angular forces are required.
  The standard version of the clamping screw at the clamping thread d4 is a socket cap screw with hexagonal socket DIN 912. It can be replaced by an adjustable clamping lever GN 511 (description see table of dimensions).

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	10.66 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Twistable two-way clamp mountings, Aluminium

  GANTER

  Twistable two-way clamp mountings GN 475 connect rods and tubes within the clamp mounting system under any adjustable angle. With the angle adjustment released, the clamp mounting halves stay connected with formlocking effect.
  The standard version of the clamping screws at the clamping threads d3 and d4are a socket cap screws with hexagonal socket DIN 912.They can be replaced by an adjustable clamping lever GN 511 (description see table of dimensions).

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	26.38 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

Loading...