GANTER Boutons de serrage

?* À propos du délai d'expédition et des prix

• • En promotion

  

  Stainless Steel-Knurled screws with recessed stud for loss prevention

  GANTER

  Stainless Steel-Knurled screws GN 653.2 can be used for to prevent loss of the thumb screw, due to the d4 recessed portion of the stud.
  When using, instead of a typical tapped and bore hole, it is necessary to provide tapped bores with a thread d1 on each of the two elements to be assembled. Additionally, a clearance bore of d5 on one or both sides must be cut.
  Depending on the design and required clamping length a1 ... a3 of the component being attached, there are a number of assembly options as shown above.
  

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	5.22 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Knurled screws, Stainless Steel

  GANTER

  All Stainless Steel-Knurled screws DIN 464 are machined from solid bar.
  Unlike in the official standard sheet, they are generally made with thread right up to the head and without recess groove at the end of the thread.

  • Remise sur volume

  à partir de∗ ：	2.68 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Star knobs with loss protection

  GANTER

  Star knobs GN 6336.13 can be captive-attached to a base element with the help of a ball chain or a retaining cable.
  The star knobs are supplied ready assembled (with retaining ring and ball chain or retaining cable).

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	4.56 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Star knobs, Cast iron

  GANTER

  Star knobs, Cast iron

  • Remise sur volume

  à partir de∗ ：	3.98 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Star knobs with loss protection

  GANTER

  Star knobs GN 6336.13 can be captive-attached to a base element with the help of a ball chain or a retaining cable.
  The star knobs are supplied ready assembled (with retaining ring and ball chain or retaining cable).

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	6.30 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Quick release star knobs, Plastic

  GANTER

  Quick release star knobs GN 6336.3 are used in such applications where the knob has to be completely removed after the releasing operation and refitted rapidly for re-clamping.
  The knob is tilted over the threaded spindle. When in position, the knob is brought into a straight position for meshing of the two threads on nut and spindle. The knob will then have to be turned only by fraction of a rotation to achieve clamping.
  Functional safety exists only if the clamping surface lies at a right angle to the threaded bolt.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	6.28 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Star knobs, Stainless Steel

  GANTER

  Star knobs, Stainless Steel

  • Remise sur volume

  à partir de∗ ：	10.12 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Control knobs with adjustable spindle, Aluminium / Steel

  GANTER

  Control knobs with adjustable spindle GN 727 allow precise adjustment or aligning i. e. of a positive stop. The spindle thread is without backlash.
  The graduations on the control knob are non-abrasive and well legible,
  The light grey cover shrouds the fixing components as well as the shaft end.
  Regarding design, numbering run, numbering position and mubering sequence of the scale please see the layout for scale rings on the order sheet "How to order Graduations".

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	90.80 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Quick release toggle nuts

  GANTER

  Quick release toggle nuts GN 6305.1 are used in such applications where the knob has to be completely removed after the releasing operation and refitted rapidly for re-clamping.
  Plug the toggle nut onto the threaded bolt at an oblique angle. During the clamping action, it engages into the threads of the bolt.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	19.20 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Hand knobs, Duroplast, with protruding steel bushing

  GANTER

  Hand knobs GN 6335.1 with protruding steel bushing have important advantages:
  The face of the bushing is exactly square to the bore and is with the complete diameter out of steel. The protruding steel bushing allows a perfect cross-dowels connection.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	2.22 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Hand knobs, Plastic, with Threaded bolt, Stainless Steel

  GANTER

  Star knobs GN 6335.5 comply with DIN 6335 type L.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	1.68 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Quick release star knobs, Plastic, bushing, Stainless Steel

  GANTER

  Quick release star knobs GN 6336.3 are used in such applications where the knob has to be completely removed after the releasing operation and refitted rapidly for re-clamping.
  The knob is tilted over the threaded spindle. When in position, the knob is brought into a straight position for meshing of the two threads on nut and spindle. The knob will then have to be turned only by fraction of a rotation to achieve clamping.
  Functional safety exists only if the clamping surface lies at a right angle to the threaded bolt.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	10.08 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Stainless Steel-Wing nuts

  GANTER

  Stainless Steel-Wing nuts

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	5.72 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Star knobs, Plastic

  GANTER

  Star knobs DIN 6336 with bore H7 are available under code GN 6336.1 and GN 6336.2.

  • Remise sur volume

  à partir de∗ ：	0.90 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Star knobs, plastic, threaded bolt Stainless Steel

  GANTER

  Star knobs GN 6336.5 comply with DIN 6336 type L.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	1.32 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Star knobs, plastic, with protruding steel bushing, with threaded bolt steel

  GANTER

  The star knobs have an immaculate contact or clamping surface thanks to the protruding steel bushing.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	0.76 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Star knobs, plastic, with threaded bolt steel

  GANTER

  Star knobs GN 6336.4 comply with DIN 6336 type L.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	0.76 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Boutons moletés, plastique

  GANTER

  • Remise sur volume

  à partir de∗ ：	2.70 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Torque limiting knob screws

  GANTER

  Torque limiting knob screws GN 3663 are used when the manually applied torque is to be limited.
  When turned clockwise, the torque mechanical system of the knurled knob triggers an „over-engagement“ as soon as the specified torque is reached. When turning anti-clockwise, the mechanical system locks such that the torque is not limited. When tightening, this will ensure that the maximum permissible torque is not exceeded. On the other hand, the torque necessary for releasing will always be transferred reliably.
  After removing the cover and loosening the countersunk screw, the thread or bore insert can be dismantled.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	58.58 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Adjustable knobs

  GANTER

  With GN 700 adjustable knobs a shaft can be infinitely adjusted in both directions. The anti-backlash mechanism with a max. load of 15 Nm ensures the firm locking of the shaft in any position.
  This mechanism prevents any uncontrolled movement of the shaft. The locking action is a safety feature to prevent unwanted re-adjustments caused by backlash and vibration.
  Scale and arrow on the control knobs are indelibly marked and easily legible.
  Besides the standard scale (Type AS) the control knob version may be supplied with any other scale (Type KS).
  Regarding design, numbering run, numbering position and numbering sequence of the scale please see the layout for scale rings on the order sheet „How to order Graduations“

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	220.20 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Control knobs for position indicators

  GANTER

  Control knobs GN 957 are used in connection with position indicators. These control knobs offer a simple solution when the assembly requires manual fine adjustment for the application for which it has been designed.
  The design of this knob adapts it to the diameter of the adjustment shaft, so that no adapter bushings GN 952.1 are needed.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	15.54 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Control knobs, Aluminium, black anodized

  GANTER

  The light grey cover of the control knobs GN 726.1 shrouds the fixing components as well as the shaft end. The cover also lends itself for a logo or other symbols.
  The collet version permits a simple adjustment of the types with scale or arrow.
  Scale and arrow on the control knobs are indelibly marked and easily legible.
  Besides the standard scale (Type S) the control knobs can be supplied with any type of graduation.
  Regarding design, numbering run, numbering position and numbering sequence of the scale please see the layout for scale knobs on the order sheet „How to order Graduations“
  
  

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	9.28 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Control knobs, Aluminium, black anodized

  GANTER

  The light grey cover of the control knobs GN 726.2 shrouds the fixing components as well as the shaft end. The cover also lends itself for a logo or other symbols.
  The collet version permits a simple adjustment of the types with scale or arrow.
  Besides the standard scale (Type S) the control knobs can be supplied with any type of graduation.
  Regarding design, numbering run, numbering position and numbering sequence of the scale please see the layout for scale knobs on the order sheet „How to order Graduations“

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	10.78 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Control knobs, Aluminium, black anodized

  GANTER

  The light grey cover of the control knobs GN 726 shrouds the fixing components as well as the shaft end. The cover also lends itself for a logo or other symbols.
  Made from an aluminum extrusion allows the manufacture of customized solutions in existing diameters at relatively low cost.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	9.04 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Control knobs, Aluminium, black anodized

  GANTER

  Control knobs GN 729 are usually selected for applications which require a limited movement within 180°.
  With the aid of limiting pins which protrude into the circular groove the angle of rotation can be restricted. The bore d4 is for a spring plunger GN 614 to act as a simple detent.
  The indexing line is indelible and visible from two sides.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	16.38 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Control knobs, Aluminium, natural colour, anodized

  GANTER

  Control knobs GN 723.4 can be combined with reference flanges GN 723.3 which offer the following advantages:
  - they are provided with a reference mark relating to the scale on the control knobs
  - they give additional support to the control shaft,
  - the version with a friction ring prevents unexpected movement through vibration.
  Scale and arrow on the control knobs are indelibly marked and easily legible.
  Besides the standard scale (Type S) they can be supplied with any type of graduation.
  Regarding design, numbering run, numbering position and numbering sequence of the scale please see the layout for scale knobs on the order sheet „How to order Graduations“

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	26.56 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Control knobs, Stainless Steel

  GANTER

  Scale and arrow on the Stainless Steel-control knobs GN 436.1 are indelibly marked and easily legible.
  Besides the standard scale (Type S) the control knobs can be supplied with any type of graduation.
  Regarding design, numbering run, numbering position and numbering sequence of the scale please see the layout for scale knobs on the order sheet „How to order Graduations“
  

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	21.24 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Control knobs, Stainless Steel

  GANTER

  Control knobs, Stainless Steel

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	18.32 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Flat knurled screws with brass / plastic pivot

  GANTER

  Flat knurled screws GN 653.10 with pivot in brass or plastic are used in applications, where marks and damages on the workpiece are unacceptable.
  The head dimensions comply with flat knurled thumb screws DIN 653.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	4.52 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Flat Knurled screws, Stainless Steel

  GANTER

  All Stainless Steel-Flat knurled screws DIN 653 are produced from one piece and threaded over its full length.

  • Remise sur volume

  à partir de∗ ：	2.48 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Flat knurled screws, Steel

  GANTER

  All flat knurled screws DIN 653 are produced from one piece and threaded over ist full length.

  • Remise sur volume

  à partir de∗ ：	1.12 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Hand knobs with increased clamping force

  GANTER

  Hand knobs GN 6335.9 have a clamping contact area which is connected to the knob via an axial ball bearing. This has led to the following advantages:
  Doubled clamping force through vastly reduced friction. There is no movement on the contact area between star knob and component which greatly reduces any marking on the clamping area. In addition a reduced creep factor has been achieved by the indreased preload.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	27.86 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Hand knobs with threaded bushing in brass

  GANTER

  Hand knobs DIN 6335 with bore H7 are available as GN 6335.1.

  • Remise sur volume

  à partir de∗ ：	0.92 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Hand knobs, Aluminum

  GANTER

  Hand knobs, Aluminum

  • Remise sur volume

  à partir de∗ ：	7.36 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Hand knobs, Aluminum with Stainless Steel-Threaded bolt

  GANTER

  Hand knobs, Aluminum with Stainless Steel-Threaded bolt

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	13.52 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Hand knobs, Cast iron

  GANTER

  Hand knobs, Cast iron

  • Remise sur volume

  à partir de∗ ：	3.60 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Hand knobs, cast, iron, with threaded bolt steel

  GANTER

  Hand knobs, cast, iron, with threaded bolt steel

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	7.66 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Hand knobs, Casting only, Cast iron / Aluminum, without bore

  GANTER

  Hand knobs GN 6335 in cast iron (GG) or Aluminum (AL) plastic coated on request.

  • Remise sur volume

  à partir de∗ ：	1.06 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Hand knobs, Plastic

  GANTER

  Hand knobs DIN 6335 with bore H7 are available as GN 6335.1.

  • Remise sur volume

  à partir de∗ ：	0.80 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Hand knobs, Plastic, protruding Stainless Steel bushing, Stainless Steel-Threade

  GANTER

  The hand knobs have an immaculate contact or clamping surface thanks to the protruding Stainless Steel bushing.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	2.96 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Hand knobs, Plastic, protruding steel bushing, threaded bolt, Steel

  GANTER

  The hand knobs GN 6335.4 have an immaculate contact or clamping surface thanks to the protruding steel bushing.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	2.22 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Hand knobs, plastic, with threaded bolt, Steel

  GANTER

  Hand knobs GN 6335.4 comply with DIN 6335 type L.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	0.88 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Hand knobs, Stainless Steel

  GANTER

  Hand knobs, Stainless Steel

  • Remise sur volume

  à partir de∗ ：	9.52 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Hand knobs, Technopolymer, with protruding Stainless Steel bushing

  GANTER

  Hand knobs GN 6335.2 with protruding Stainless Steel bushing have important advantages:
  The face of the bushing is exactly square to the bore and is with the complete diameter out of Stainless Steel. The protruding Stainless Steel bushing allows a perfect cross-dowels connection.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	3.42 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Hand knobs, Technopolymer, with protruding steel bushing

  GANTER

  Hand knobs GN 6335.2 with protruding steel bushing have important advantages:
  The face of the bushing is exactly square to the bore and is with the complete diameter out of steel. The protruding steel bushing allows a perfect cross-dowels connection.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	1.62 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

Loading...