GANTER Poignées

?* À propos du délai d'expédition et des prix

• • En promotion

  

  Stainless Steel-Cabinet "U" handles

  GANTER

  Stainless Steel-Cabinet "U" handles GN 425 Ø 6, Ø 8 and Ø 10 are supplied with two stainless steel location discs. They guarantee a perfect location even with large holes in the cabinet. The discs are loosely enclosed.
  
  The manufacturing process (bending) allows the production of special lengths in relatively small quantities.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	6.70 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Cabinet "U" handles, Aluminium

  GANTER

  GN 426 cabinet „U“ handles are made from a bent aluminum profile and have excellent stability and ergonomic design. Due to the production process, special designs can be supplied even in relatively small quantities.
  In addition to the standard surfaces, these cabinet „U“ handles are also available with a functional coating.
  The WSA version has a powder coating based on zinc molybdate, which gives it antimicrobial properties. The principle of action, which is activated by the presence of moisture, demonstrably reduces the growth of viruses, bacteria, and fungi within 24 hours, so that contaminated surfaces ultimately have less than 0.2% of the original number of microbes.
  Standard elements with antimicrobial plastic coating are primarily used in the health care sector and in public buildings, such as airports, train stations, stadiums, etc.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	12.94 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Cabinet "U" handles, Hygienic Design

  GANTER

  GN 429 cabinet „U“ handles are intended for use in hygiene areas. The sealed mounting surfaces enable fastening without dead spaces. The high quality finish prevents adherence of dirt and facilitates cleaning.
  The manufacturing process (bending) allows the production of special lengths in relatively small quantities.

  • Remise sur volume

  à partir de∗ ：	28.84 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Cabinet "U" handles, Steel

  GANTER

  Cabinet "U" handles GN 425 Ø 8 and Ø10 are supplied with two stainless steel location discs. They guarantee a perfect location even with large holes in the cabinet. The discs are loosely enclosed.
  The chrome-plated design is only conditionally suitable for outdoor use. The stainless steel design version should be given preference.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	5.42 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Inclined Stainless Steel-Cabinet "U" handles

  GANTER

  Inclined Stainless Steel-Cabinet "U" handles GN 565.7 are produced from profiled Stainless Steel
  extrusions. Their special features are their rigidity and ergonomical shaping.
  The angled contact surface allows improved access even in tight spaces such as corners.
  The manufacturing process (bending) allows the production of special lengths in relatively small quantities.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	45.42 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Tubular arch handles, Tube Aluminum or Stainless Steel

  GANTER

  With their curved type, GN 666.4 tubular arch handles highlight modern machine design.
  The production method used allows special solutions to be realised, e. g. with other radii of curvature or other leg heights.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	102.14 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Poignées encastrables, zinc moulé sous pression, type à visser (GN 7330)

  GANTER

  Les poignées encastrables GN 7330 peuvent être installées facilement et rapidement par l'avant à l'aide de vis fraisées ou par l'arrière à l'aide de vis sans tête.
  
  Les poignées encastrables avec joint de logement (n° 2) empêchent la pénétration des saletés et de liquides à l'intérieur du logement. Le type A est fourni avec quatre vis fraisées d'étanchéité supplémentaires, dotées d'un revêtement en polyamide sur la tête pour une étanchéité parfaite.

  • Remise sur volume

  à partir de∗ ：	11.00 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Cabinet "U" handles, Aluminium

  GANTER

  Aluminium-Cabinet "U" handles GN 425.1 Ø 8 and Ø10 are supplied with two stainless steel location discs. They guarantee a perfect location even with large holes in the cabinet. The discs are loosely enclosed.
  The manufacturing process (bending) allows the production of special lengths in relatively small quantities.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	6.76 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Cabinet "U" handles, Aluminium

  GANTER

  GN 565.1 cabinet „U“ handles are made from a bent aluminum profile and have excellent stability and ergonomic design. Due to the production process, special designs can be supplied even in relatively small quantities.
  In addition to the standard surfaces, these cabinet „U“ handles are also available with a functional coating.
  The SWU version is coated with a highly weather-resistant and UV-protective powder coating system, making this version excellent for outdoor use.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	8.70 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Poignées d’armoire en "U" en acier inoxydable, à souder

  GANTER

  • Remise sur volume

  à partir de∗ ：	16.04 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Poignées d’armoire en "U" en acier inoxydable

  GANTER

  • Remise sur volume

  à partir de∗ ：	33.98 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  „U“ handles

  GANTER

  The dimensisons of the „U“ handles GN 423 have been designed to match a 19“ rack and enclosure layout.
  The values of the height unit HE given in the table refer to the corresponding front panel heights of the housings.
  Handle bar and handle shanks are interconnected via a plug-type connection, with the effect that special lengths are easily realised.
  Thanks to the fixing screws included in the set, the „U“ handles are easily and economically mounted.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	7.26 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Arch handles, Aluminium

  GANTER

  The manufacturing process (bending) allows the production of special lengths in relatively small quantities.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	13.86 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Arch handles, Aluminium

  GANTER

  Arch handles, Aluminium

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	66.22 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Arch handles, Steel

  GANTER

  Arch handles, Steel

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	4.66 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Cabinet "U" handles

  GANTER

  GN 428 cabinet „U“ handles are made from a bent aluminum profile and have excellent stability and ergonomic design. Due to the manufacturing process, special designs can be supplied even in relatively small quantities.
  For type B, socket button head screws, hexagon nuts and washers are included parts of the order.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	28.50 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Cabinet "U" handles for welding

  GANTER

  GN 426.3 cabinet “U” handles are produced through bending. This allows special lengths or special geometries with the same r and s dimensions to be delivered even in comparatively small unit quantities.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	12.92 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Cabinet "U" handles Steel / Polyurethane foam

  GANTER

  The shock absorbing casing of the GN 564 “U” handles made of Thermoplastic polyurethane (TPU) offers protection from injuries, while its elliptical shape give it a nice hold.
  
  The steel core guarantees high durability.
  
  

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	21.26 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Cabinet "U" handles, Aluminium

  GANTER

  Aluminium-Cabinet "U" handles GN 425 Ø 8 and Ø10 are supplied with two stainless steel location discs. They guarantee a perfect location even with large holes in the cabinet. The discs are loosely enclosed.
  The manufacturing process (bending) allows the production of special lengths in relatively small quantities.

  • Remise sur volume

  à partir de∗ ：	6.92 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Cabinet "U" handles, Aluminium

  GANTER

  Cabinet "U" handles GN 426.1 are produced from profiled aluminium extrusions.
  The manufacturing process (bending) allows the production of special lengths in relatively small quantities.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	24.06 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Cabinet "U" handles, Aluminium

  GANTER

  Cabinet "U" handles GN 427 are produced from profiled aluminum extrusions.
  The manufacturing process (bending) allows the production of special lengths in relatively small quantities.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	5.42 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Cabinet "U" handles, Aluminium

  GANTER

  A special characteristic of the Handle GN 559 is the thumb rest pad on the front of the leg. At the same time the extended leg offers an open ended version with wide access.
  The fastening bores of type C are closed by a cap following the handle installation. The cap is included in the delivery contents.
  Handles GN 559 are known for their high stability. They are fixed by two M8 screws whereby type A offers two alternative hole centers (l2 or l3).

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	13.52 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Cabinet "U" handles, Aluminium

  GANTER

  Cabinet "U" handles GN 565.3 are suitable for applications where lower „lifting forces are required such as on lids or protective machine covers.
  The countersunk holes of type B allow fixing with self tapping screws or countersunk rivets.
  The manufacturing process (bending) allows the production of special lengths in relatively small quantities.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	6.96 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Cabinet "U" handles, Aluminium

  GANTER

  GN 565 cabinet „U“ handles are made from a bent aluminum profile and have excellent stability and ergonomic design. Due to the production process, special designs can be supplied even in relatively small quantities.
  In addition to the standard surfaces, these cabinet „U“ handles are also available with a functional coating.
  The SWU version is coated with a highly weather-resistant and UV-protective powder coating system, making this version excellent for outdoor use.
  The WSA version has a powder coating based on zinc molybdate, which gives it antimicrobial properties. The principle of action, which is activated by the presence of moisture, demonstrably reduces the growth of viruses, bacteria, and fungi within 24 hours, so that contaminated surfaces ultimately have less than 0.2% of the original number of microbes.
  Standard elements with antimicrobial plastic coating are primarily used in the health care sector and in public buildings, such as airports, train stations, stadiums, etc.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	6.96 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Cabinet "U" handles, Aluminium

  GANTER

  The installation of cabinet "U" handles GN 728 can be carried out from the back (Type A) as well as from the operator’s side (Type B). The hole centers dimension is identical on all variants. As a result they can be mounted in pairs opposite each other.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	6.72 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Cabinet "U" handles, Cast iron

  GANTER

  Cabinet "U" handles GN 225 are simple, very rugged handles.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	11.12 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Cabinet "U" handles, Steel

  GANTER

  Cabinet "U" handles GN 425 Ø 6, Ø 8 and Ø 10 are supplied with two location discs. They guarantee a perfect location even with large holes in the cabinet. The discs are loosely enclosed.
  The chrome-plated design is only conditionally suitable for outdoor use. The stainless steel design version should be given preference.
  The manufacturing process (bending) allows the production of special lengths in relatively small quantities.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	4.58 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Cabinet "U" handles, Steel, for welding

  GANTER

  The manufacturing process (bending) of the cabinet "U" handles GN 425.3 allows the production of special lengths in relatively small quantities.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	4.48 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Edge handles, Aluminum / Zinc die casting

  GANTER

  The tube extrusion for edge handles GN 481 is formed in such a way that two countersunk self tapping screws are used to cut their own counter thread in the extrusion to hold the end caps in position.
  If an edge handle for a cabinet of non-standard length is required, a standard extrusion can simply be shortened to fit.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	14.08 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Finger handles, Steel

  GANTER

  Finger handles, Steel

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	5.02 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Flat cabinet "U" handles, Aluminium

  GANTER

  Cabinet handles GN 668 are produced from aluminium extrusions.
  They can be mounted either from the back (type A) or by means of the handle base from the operator’s side (type B).
  The manufacturing process (bending) allows the production of special lengths in relatively small quantities.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	5.50 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Folding handles with recessed tray

  GANTER

  The folding handles with recessed tray GN 425.8 are used if the handle is to protrude by a maximum of 3 mm when folded down.
  In type A, the folding handle is held in both end positions by spring-loaded thrust pieces.
  In type B, the folding handle always spring-returns to the starting position after being released, preventing it from protruding with potentially interfering effect.
  

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	36.58 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Folding handles, Steel

  GANTER

  Folding handles GN 425.2 are used in such applications where minimal protrusion is required.
  In both positions the handle is retained by a spring loaded detent.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	25.30 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Folding handles, Steel

  GANTER

  Folding handles GN 425.5 are used in places where the handle must not protrude or protrude only a short distance.
  
  The handle is locked in place in the resting position by means of a spring-loaded (cup springs) thrust bolt.
  
  The static load capacity value given in the table is an approximate value which, if exceeded, may result in permanent deformation or fracture of the plastic attachment part. The folding handle GN 425.2 may be used as an alternative.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	26.02 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Handle legs for tubular handles, Zinc die casting

  GANTER

  Handle legs GN 333.8 can be used for longer tubes or higher loads of tubular handles.
  They can be used for tube Ø 28 of the tubular handles GN 333 and GN 333.2.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	17.58 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Handle legs for tubular handles, Zinc die casting

  GANTER

  Handle legs GN 333.9 can be used for longer tubes or higher loads of tubular handles.
  They can be used for tube Ø 28 of the tubular handles GN 333.1 and GN 333.3.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	17.50 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Inclined cabinet "U" handles, Aluminium

  GANTER

  Inclined cabinet "U" handles GN 565.2 are produced from profiled aluminum
  extrusions. Produced from profiled aluminium extrusions their special features are their rigidity and ergonomical shaping.
  The angled contact surface allows improved access even in tight spaces such as corners.
  The manufacturing process (bending) allows the production of special lengths in relatively small quantities.
  In type B lens screws, hexagon nuts and washers are included parts of the order.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	8.94 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Ledge handles

  GANTER

  Typical applications for ledge handles GN 430 include swivel or sliding doors on protective doors and equipment. They are also suitable for use as drawer handles.
  The screw channel for screw sizes M6 (extruded aluminium) allows an optional number of fixing screws in any position within the dimension l2.
  Special lengths can be manufactured from relatively small quantities upwards.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	8.30 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Ledge handles, Aluminium

  GANTER

  A typical field of application is on hinged protective doors on machinery and installations.
  Manufactured from aluminum extrusion allows special lengths and material sold by the meter to be realised easily.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	6.88 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Ledge handles, with lettering block

  GANTER

  Typical applications for ledge handles with lettering block GN 430.1 include swivel or sliding doors on protective doors and equipment. They are also suitable for use as drawer handles.
  
  The screw channel for screw sizes M6 (extruded aluminium) allows an optional number of fixing screws in any position within the dimension l2.
  
  Special lengths are easily realised because the ledge handle needs no further machining when mounted.
  
  In the design with lettering block, the end cap when delivered is mounted on one side such that the paper / film strip supplied can be lettered and pushed into the groove provided.
  Go to www.ganter-griff.de/service to open a ZIP-file with different documents (Word®, Open Office, PDF) which you can use to create lettering and labels.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	11.42 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Oval tubular handles Mounting from operator‘s side

  GANTER

  Oval tubular handles GN 334.1 are highly stable.
  The handle tube can be mounted without any further machining, allowing special lengths to be realised easily.
  

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	30.18 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Oval tubular handles, Aluminum / Plastic

  GANTER

  Characteristic for the design of the GN 366 oval handles: Tube and handle leg are made in the same elliptical profile.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	41.76 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Oval tubular handles, Aluminum / Zinc die casting

  GANTER

  Oval tubular handles GN 334 are attractive in design and highly stable.
  The handle tube can be mounted without any further machining, allowing special lengths to be realised easily.
  

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	32.10 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Stainless Steel-Arch handles

  GANTER

  Stainless Steel-Arch handles

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	5.80 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Stainless Steel-Arch handles

  GANTER

  The manufacturing process (bending) allows the production of special lengths in relatively small quantities.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	65.90 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

Loading...