HIROSE ELECTRONIC Connecteurs coaxiaux

?* À propos du délai d'expédition et des prix

• 

  Connecteurs MMCX

  HIROSE ELECTRONIC

  The MMCX connector is a small push-on lock coaxial connector.
  
  [Features]
  · Simple push-on format used for easy insertion and extraction.
  · Able to load PCMCIA type II cards: MMCX-LR-SMT (40) have a thickness of 3.51 mm and can be loaded to the back side of type II cards.
  · Moreover, if a 0.36 mm degree of eccentricity from the central card line is used when mounting a card on the circuit board mounting surface, the central card axis and central connector axis will be aligned.
  · Ultra-thin cable compatibility: RG type high frequency coaxial cable... RG-178B/U (⌀1.8), ... RG-316/U (⌀2.59MAX), ⌀1.48 (single layer shield) fluorine resin coaxial cable, ⌀1.32 (double layer shield) ultra-thin fluoride resin coaxial cable, ⌀1.13 (single layer shield) ultra-thin fluoride resin coaxial cable, ⌀1.37 (single layer shield) ultra-thin fluoride resin coaxial cable.
  · Dual terminal connection with other series: Capable of dual terminal connection with U.FL, N, BNC, HRM, and TNC series.
  · Highly coordinated: high frequency traits are realized with a voltage standing wave ratio (V.S.W.R.) of less than 1.2 at a frequency of up to DC 6 GHz (possessing representative value and not compatible with all products).
  ・Compatibility: the opening is standard, allowing for mating with MMCX connectors.

  • Remise sur volume

  à partir de∗ ：	7.25 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Atténuateur fixe (type SMA)

  HIROSE ELECTRONIC

  A fixed attenuator with SMA connector shape mating components. An abundant selection of products featuring various plug and jack combinations and attenuation volume variations is available.
  
  [Features]
  • Abundant variations of all kinds of attenuation volume: Attenuation is available in ranges from 0 - 4 dB in 0.5 dB steps, 4 - 10 dB in 1 dB steps, and 12, 13, 14, 15, 20, 26, and 30 dB models with fine level adjustment options, for an abundant selection of variations.
  • SMA type: The mating shape features a combination of plug and jack components, and the exterior is made from stainless steel with a small and durable structure.
  • Highly adjustable with high reliability: The attenuation element design uses a constant distribution circuit and metal film resistance, and V.S.W.R. provides a high level of adjustability as shown in the separate table.
  • Also, this unit has stable operation properties in a variety of different environments in terms of temperatures, humidity levels, gas conditions and other factors.

  • Remise sur volume

  à partir de∗ ：	86.53 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur coaxial petit format, à verrouillage encliquetable, série MSS

  HIROSE ELECTRONIC

  Utilizing a slide snap lock method, both the internal and external conductors are in almost perfect contact, providing excellent durability. There are two types of wiring methods used: crimp wire connection and screw clamps. Compliant with Japan Defense Agency DSPC-6206.
  
  [Features]
  • The Japan Defense Agency has enacted a specifications document: DSPC-6206.
  • Every aspect of performance for mid-size connectors is specifically demonstrated, and although the size is exceedingly miniaturized, performance is comparable to mid-sized high frequency connectors.
  • A slide snap locking system is utilized within the external conductor, and this conductor has near complete contact and also demonstrates excellent vibration resistance.
  • Wire connection work can be conducted in a thoroughly simplified and assured manner using one of these two methods: the crimp wire connection method or the screw clamp method.

  • Remise sur volume

  à partir de∗ ：	8.34 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur coaxial de forme TNC - série TNC

  HIROSE ELECTRONIC

  A small, locking type screw coupling coaxial connector. This connector is optimally suited to connecting to mobile radio equipment antennas due to its mechanical robustness.
  
  [Features]
  · 1. Mechanically robust due to center locking contact.
  · 2. The center wire is connected by solder and the outer wires are connected by crimped terminal connectors.
  · 3. Optimally suited to connecting to mobile radio equipment antennas.

  • Remise sur volume

  à partir de∗ ：	30.66 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• • En promotion jusqu’au 30/11/2024

  

  Connecteurs BNC

  HIROSE ELECTRONIC

  Coaxial connector and BNC connector can be used with a wide variety of devices. · There is a rich selection of product types.
  
  [Features]
  ・The most common 50Ø-type cable: BNC series is the most widely used 50Ø cable (there is also the 75Ø type).
  ・Bayonet lock for quick attachment and detachment: bayonet lock mechanism for easy attachment and detachment.
  ・Applicable cables: complete coaxial cables with an outer diameter of Ø3 - Ø8 (RG-55・58/U, etc.)
  ・Applicable regulations: Japan Defense Agency (DSPC6202).
  ▪ Japanese Industrial Regulations (JISC5412): based on MIL regulations.

  • Remise sur volume

  à partir de∗ ：	7.44 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Connecteur coaxial type C05, série UM

  HIROSE ELECTRONIC

  This is a quick-lock type coaxial connector. · There is a rich selection of product types.
  
  [Features]
  · Optimized for ultra-thin coaxial cables: ultra-small coaxial connector optimized for ultra-thin coaxial cables with high reliability.
  · Lock system: The lock system is the quick lock type system.
  · The quick lock type is regulated by Japan Defense Agency Standard DSPC6205.
  · Connection system: The connection system is the extremely easy-to-use and reliable crimp attachment system.

  • Remise sur volume

  à partir de∗ ：	3.73 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur SMA série HRM

  HIROSE ELECTRONIC

  This is a MIL standard coaxial connector, SMA connector. We were the first company to successfully develop this . With high reliability and different variations, it is used with a wide range of equipment.

  • Remise sur volume

  à partir de∗ ：	4.56 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur coaxial SMT petit format, série E.FL

  HIROSE ELECTRONIC

  This small coaxial cable occupies a circuit board area of 9.4 mm².
  
  [Features]
  ・Occupied circuit board area: Compared to the manufacturer of the H.FL series, the occupied circuit board area is reduced by approximately 49% - 56% with an occupied area of 9.2 mm².
  ・Ultra-thin fluorine resin cable: bendable Ø0.81 and Ø1.32 ultra-thin fluorine resin cables are used in an effort to make laying cable easier.
  ・High coordination: the ability to handle high-frequency waves up to DC 2 GHz and a V.S.W.R. of 1.3 or less.
  ・Automatic mount compatibility: the receptacle's embossed packaging allows for automatic mounting.
  ・Easy connector removal: connectors can be easily removed using a removal tool.
  ・Easy mate confirmation: a definite lock feel can be used to confirm mating, even with ultra small models.

  • Remise sur volume

  à partir de∗ ：	0.95 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur coaxial SMT petit format, série H.FL【100 pièces par conditionnement】

  HIROSE ELECTRONIC

  This is a small coaxial connector for circuit board mounting. It is low-profile with a height of 3 mm on mating.

  • Remise sur volume

  à partir de∗ ：	96.89 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Interrupteur coaxial (CC - 6GHz) pour contrôle type petit format, sans halogène, hauteur 1.6mm

  HIROSE ELECTRONIC

  An ultra-small coaxial switch for circuit checking with a mount height of 1.6 mm. 2.7 mm × 2.7 mm space saving design. Corresponds to halogen-free specifications.
  
  [Features]
  · Low insertion losses: 6 GHz TYP when not mated. Low insertion losses of 0.1 dB.
  · Space-efficient design: 2.7 mm × 2.7 mm space-efficient design.
  · Low profile: Working towards profile with height of 1.6 mm.
  · Lightweight: Lightweight, weighing 0.025 g.
  · Long life: Sufficient reliability ensured for 100 circuit insertions and extractions.
  · Wide range of use: Usable with frequencies up to DC 6 GHz.
  · Prevents solder oozing: signal terminals are plated and a nickel barrier is placed between the connection and mounting portions in order to prevent solder oozing for a variety of soldering styles.
  · Corresponds to automatic mounting: embossed tape allows for automatic mounting.
  · Also available with absorbent cap.
  · Halogen free: The receptacle does not use chlorine or bromine.

  • Remise sur volume

  à partir de∗ ：	35.51 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Interrupteur coaxial (CC - 10GHz) pour interface type ultra-petit format, hauteur 2.5mm

  HIROSE ELECTRONIC

  An ultra-small coaxial switch with a mount height of 2.5 mm. Can also be used as an external antenna connector in addition to circuit checking.
  
  [Features]
  · Wide range of use (compatible with up to DC 10 GHz): Usable with frequencies up to DC 10 GHz.
  · Low insertion losses: 1 GHz TYP 0.08 dB, 2 GHz TYP 0.12 dB when not mated.
  · Space saving: The outer dimensions are 3.5 mm x 3.1 mm to save space.
  · Low profile: Working towards profile with MAX height of 2.5 mm.
  · Lightweight: Lightweight, weighing 0.043g.
  · Long life: a life span of 12,000 insertions and extractions.
  · Compatible with automatic mounting: embossed tape allows for automatic mounting.
  · Self alignment: ±0.5 mm guide amount when mating with plug.
  · Beryllium and halogen free: the receptacle does not use beryllium, chlorine, or bromine.

  • Remise sur volume

  à partir de∗ ：	25.72 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Connecteurs / Connecteurs coaxiaux légers, compacts SMT, série U.FL (1,9, 2,3, 2,4 mm)

  HIROSE ELECTRONIC

  The de facto standard for low-profile miniature coaxial connectors. Used for various devices, including many types of antenna connections, wireless modules, and more.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Remise sur volume

  à partir de∗ ：	26.52 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Borne d'extrémité non réfléchissante (type SMA), série HRM-TM

  HIROSE ELECTRONIC

  This is a highly functional and non-reflective end terminal using our independent high-frequency wave coordination technology. The opening is an SMA connector.
  
  [Features]
  · High performance: an end-terminal device that achieves an ultra wide range and ultra high frequency coordination without reflection using independent, high-frequency wave coordination technology.
  · With SMA connector: using externally-equipped stainless steel and a hard SMA connector (HRM series).

  • Remise sur volume

  à partir de∗ ：	31.82 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Connecteur coaxial en N - série N

  HIROSE ELECTRONIC

  A medium-sized coaxial connector with a screw coupling lock for broadband (up to DC 10 GHz). We stock a wide array of variations, such as plugs, jacks, and adapters, etc.
  
  [Features]
  · 1. Constant Impedance Connector - 50 Ω Series
  · The N Series are medium-sized constant impedance connectors suitable for medium-sized coaxial cables (75 Ω Series is also available).
  · 2. Lock-type Screw Coupling.
  · A screw coupling with a locking mechanism for secure locking.
  · 3. Compatible Cables
  · RG-5/6/8/9/U, etc.
  · 4. Compatible Standards
  · Japan Defense Agency (DSPC6201).
  · Japan Industrial Standards (JISC5411).
  · MIL Standards Compliant.

  • Remise sur volume

  à partir de∗ ：	24.60 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

Loading...