HOZAN Tournevis（Shaft through：N/A）
| Nombre de jours d'expédition |
|
|---|
?* À propos du délai d'expédition et des prix
-
- En promotion
Tournevis Phillips, embout n° 00–2
HOZAN
A screwdriver enabled to \ deal with screws in hard-to-reach places by reducing the outer diameter of the screwdriver shaft.
[Features]
· Hole diameter is compatible with deep screws because the shaft has a thinner finish than even JIS standards.
· Shaft is thin but still complies with JIS "torsional strength" standards.
· The basic hardening treatment for shaft strength is skilled full quenching.
· The polypropylene grip with pen clip, which can be inserted into your pocket, has both strength and lightness.
· Thin and tough electroless nickel plating is used to maintain accuracy.
[Applications]
· Ideal for screws in deep places as often seen with home appliances.- Remise sur volume
- Stock
à partir de∗ ： 9.31 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Jeu de tournevis de réglage en céramique D-17
HOZAN
A long screwdriver that's convenient for adjustment inside equipment.
[Features]
· With a sewn case that is resistant to friction and pulling.
· Uses zirconia ceramic that stands out among fine ceramics specifically for its exceptional strength and elasticity.
· Has high abrasion resistance and maintains cutting edge precision for a long time even for tip-type semi-fixed knob adjustment work.
[Applications]
· The 110 mm long shaft makes it ideal for adjusting parts in deep places.- Remise sur volume
à partir de∗ ： 64.90 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Visseuse électrique D-331 / D-332
HOZAN
An electric screwdriver equipped with a cushioned handle that is highly effective for slip prevention.
[Features]
· Elastomer resin is used for slip prevention of the handle component.
· Tightly fits on to the handle body and exhibits excellent gripping performance.
· Has a handle shape that makes pressing the screwdriver against screws easy so that force can be transferred well.
· The tip has been magnetically processed to hold screws and the handle is made of polypropylene resin and is lightweight.
· A design without plating in order to avoid changes in tip precision.
[Applications]
· Ideal for screw tightening work in deep and narrow spaces.
· Electric type screwdriver that can be easily pushed and turned, recommended for the Licensed Electrician Proficiency Test.- Remise sur volume
à partir de∗ ： 10.86 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Tournevis de précision, lot de 6【6 pièces par conditionnement】
HOZAN
High-precision screwdriver set with high versatility.
[Features]
· A set of +No.0/+No.1/-1.2 x 0.32/-1.8 x 0.32/-2.3 x 0.35/-3.0 x 0.45.
· Sewn case included.
[Applications]
· Ideal for fast turning of small screws thanks to its rotary-type head that provides high workability.à partir de∗ ： 24.23 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
- En promotion
Tournevis tête plate D-630 – D-655
HOZAN
[Features]
· Designed to deal with the screws in hard-to-reach places by reducing the outer diameter of the screwdriver shaft.
· Hole diameter is compatible with deep screws like those in household appliances because the shaft has a thinner finish than even JIS standards.
· Even when thin, "torsional strength" abides by JIS standards.
· The basic hardening treatment for shaft strength is thermal hardening treatment involving skilled full quenching.
· The polypropylene grip with pen clip has both strength and lightness.
· It uses electroless nickel plating that's thin and tough in order to maintain accuracy, providing surface processing that emphasizes accuracy and strength.
[Applications]
· Convenient for tightening and loosening screws.à partir de∗ ： 5.10 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Tournevis tronqué D-68 / D-69
HOZAN
Screwdriver to be used for screws in narrow spaces.
[Features]
· Convenient for screws that are located in narrow places where ordinary screwdrivers cannot enter.
· Compact design that allows work in narrow locations.
· Handle shape that transfers force.
· A spherical handle allows the screwdriver to be easily pressed against the screw by grasping the handle in the palm.
[Applications]
· The short overall length of 83 mm allows easy handling in narrow spaces. Exhibits great effect in narrow spaces.à partir de∗ ： 5.52 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Tourne-écrou D-840
HOZAN
A convenient nut driver (box driver) handy for quick turning of nuts and bolts.
[Features]
· Shaft length is 100 mm and is also ideal for nuts in deep places where hands get in the way.
· Box depth is 18 mm for screws with a long shaft; the area where the screw protrudes from the nut can also be used.
· Black oxide processing forms an oxidation film during rustproofing treatment.
[Applications]
· Ideal for small nuts for hobby use.
· M2 screws which are ideal for the wheel nuts of electric four-wheel drive vehicles (no lock, 4 mm width across flats).- Remise sur volume
à partir de∗ ： 6.77 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Tournevis d'électricien avec DEL, D-745
HOZAN
An LED type inspection screwdriver with high visibility.
[Features]
· Batteries can be changed.
· Applicable ranges: 100 to 240 VAC, tip size of 2.5 x 0.6 mm, total length of 139 mm, shaft length of 17 mm, shaft diameter of 2.5 mm.
· Handle diameter 16 mm, weight 23 g.
· Be sure to check the light before use.
· Be careful of short circuit and electric shock.
[Applications]
· Used for determining AC polarity and checking electrical conductance.
· Can be used within the applicable range.- Remise sur volume
à partir de∗ ： 14.71 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
| Marque |
|---|
| Série du produit |
| à partir de∗ |
| Délai d'expédition minimum ： |
| Spécifications |
| Tip standards |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| Shaft length L (mm) |
| Single Product/Set Classification |
| Shaft type |
| Magnet |
| Shaft through |
| Bolster |
| Grip Type |
| Tip size / flathead (-) blade thickness (mm) B2 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) |
| (Box/Hex/Ball-Point) Width Across Flats (inch) |
|
|
|
|
|
|
|
| |
| Marque | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN |
| Série du produit | Tournevis de précision, lot de 6【6 pièces par conditionnement】 | |||||||
| à partir de∗ | 9.31 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 64.90 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 10.86 € Prix spécial *Prix unitaire/configuration de base En promotion | 24.23 € *Prix unitaire/configuration de base | 5.10 € Prix spécial *Prix unitaire/configuration de base En promotion | 5.52 € *Prix unitaire/configuration de base | 6.77 € Prix spécial *Prix unitaire/configuration de base En promotion | 14.71 € *Prix unitaire/configuration de base Remise sur volume |
| Délai d'expédition minimum ： | Jour même | Jour même | Jour même | 7 jours | Jour même | Jour même | Jour même | 6 jours |
| Spécifications |
| |||||||
| Tip standards | Phillips (+) | Phillips (+) / tête plate (-) | Phillips (+) | Phillips (+) / tête plate (-) | Tête plate (-) | Phillips (+) | Boîte | Tête plate (-) |
| Tip size / Phillips (+) | N° 2 | N° 0 | N° 2 | N° 0 / N° 1 | - | N° 2 | - | - |
| Tip size / flathead (-) blade width (mm) B1 | - | 1.3 ～ 1.8 | - | 1.2 ～ 3 | 2.5 | - | - | 2.5 |
| Shaft length L (mm) | 100 ～ 300 | 110 | 150 | - | 100 | 35 | 125 | 17 |
| Single Product/Set Classification | Unité | Produit du jeu | Unité | Produit du jeu | Unité | Unité | Unité | Unité |
| Shaft type | Rond | Rond | Rond | Rond | Rond | Rond | Rond | Rond |
| Magnet | N/A | N/A | Disponible | N/A | N/A | N/A | N/A | N/A |
| Shaft through | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
| Bolster | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
| Grip Type | Caoutchouc | Résine | Caoutchouc | Acier inoxydable | Caoutchouc | Caoutchouc | Résine | Résine |
| Tip size / flathead (-) blade thickness (mm) B2 | - | 0.4 | - | 0.32 ～ 0.45 | 0.35 | - | - | 0.6 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) | - | - | - | - | - | - | 8 | - |
| (Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - | - | - | - | - |
Loading...
Filtrer par:
Stock
-
- Stock Items Included
Affiner la recherche en précisant les spéc./dim.
-
Tip standards
- Phillips (+)
- Tête plate (-)
- Phillips (+) / tête plate (-)
- Torx
- Boîte
- Hexagone
- Bille
- Combinaison
- Autre
-
Tip size / Phillips (+)
- N° 000
- N° 00
- N° 0
- N° 1
- N° 2
- N° 3
- N° 4
- Autre
-
Tip size / flathead (-) blade width (mm) B1
-
Shaft length L (mm)
-
Single Product/Set Classification
- Unité
- Produit du jeu
-
Shaft type
- Rond
- Carré
-
Magnet
- Disponible
- N/A
-
Shaft through
- Disponible
- N/A
-
Bolster
- Inclus
- N/A
-
Grip Type
- Résine
- Poignée en bois
- Caoutchouc
- Acier inoxydable
-
Tip size / flathead (-) blade thickness (mm) B2
-
(Box/Hex/Ball-Point) Width Across Flats (mm)
-
(Box/Hex/Ball-Point) Width Across Flats (inch)
Affiner la recherche en spécifiant le fabricant
-
- MAEDAKINNZOKU (20)
- PB SWISS TOOLS (16)
- ANEX (14)
- HOZAN (8)
- KTC(KYOTO TOOL) (8)
- WERA (7)
- ENGINEER (6)
- TRUSCO NAKAYAMA (5)
- TRAD (4)
- HIRAI KOGU (3)
- EIGHT TOOL (2)
- SK 11 (2)
- WIHA (2)
- SUEKAGE TOOL (1)
- GEDORE (0)
- AS ONE (0)
- CUSTOM KOBO (0)
- HANDIWORK (0)
- MATADOR (0)
- PROXXON (0)
- RITTAL (0)
- WOLFCRAFT (0)
- E VALUE (0)
- SMATO (0)
- WEIDMUELLER (0)
- OSG (0)
- SIGNET (0)
- SUNFLAG (0)
- VESSEL (0)
- BAHCO (0)
- BERNSTEIN AG (0)
- HAZET (0)
- KNIPEX (0)
- PHOENIX CONTACT (0)
Affiner la recherche en précisant le type de données CAO
-
- 2D
- 3D
Catégories relatives à « Tournevis »
-
- Clés / clés polygonales /clés à cliquet
- Clés à six pans
- Clés anglaises
- Clés Torx
- Clés à douille
- Tournevis
- Pinces/tenailles
- Ensembles d'outils / boîtes à outils
- Embouts de tournevis
- Brucelles
- Outils d'entretien automobile
- Outils de plomberie et de climatisation
- Outils pour la tôle
- Outils destinés aux installations électriques
-
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.