HOZAN Pinces/tenailles（With or without Spring：Disponible）
| Nombre de jours d'expédition |
|
|---|
?* À propos du délai d'expédition et des prix
-
Pince coupante miniature N-34
HOZAN
Copper and other soft wire dedicated nippers that place emphasis on the cutting surface finish.
[Features]
· Compact size of about 100 mm total length that fits in the palm of a woman.
· Ideal for precision work with a sense of size that makes rotation easy to control.
· With a cutting edge that can cut lightly and produces a clean cross-section, finished exclusively for copper wires.
· Has thin and flat blades that can do side cutting with little protrusion of the binding band, and can be used to work without injuring the hands.
· The handle is soft to grip and has anti-static (ESD) specifications that allow it to be used even in an electronic environment without any concerns.
· Adopts a coil spring with excellent durability and recoverability, and allows fatigue-free work even when constantly holding the tool.
[Applications]
· Ideal for cutting zip ties and thin copper wires, or precision work.à partir de∗ ： 31.61 € Délai d'expédition minimum ： 9 jours *Prix unitaire/configuration de base
-
Pince miniature à long bec P-35
HOZAN
Small-mouth long nose pliers that are suitable for precision work in which fine bending and grabbing of small objects are necessary.
[Features]
· The width of the tip is only 0.6 mm, making it as thin as tweezers.
· Since the gripper at the tip is not knurled (serrated), it will not scratch the gripped objects.
· Compact size of 116 mm total length that fits in the palm of a woman.
· Chamfering of sharp projections of the rotating part reduces accidental injuries and promotes safe work.
· Equipped with coil spring to prevent fatigue even during continuous work.
· Anti-static (ESD) specification soft grip for safe work with electronics.
[Applications]
· Besides lead bending of electronic parts, this is also ideal for precision work such as accessory manufacturing and wire crafts.à partir de∗ ： 27.90 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Pince miniature à long bec P-36
HOZAN
Miniature long-nose pliers with anti-slip knurling.
[Features]
· Knurled to enhance the retention force.
· Hardness HRC: 46.
· Weight: 65 g.
· ESD control value: Ground resistance Rg < 1 x 10^12 Ω.
[Applications]
· Miniature longnose pliers.à partir de∗ ： 22.95 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Pince coupante miniature N-32
HOZAN
Small nippers suitable for precision work.
[Features]
· Compact size of 130 mm total length that fits in the palm. It provides excellent maneuverability and ease of use.
· Small body convenient for cutting binding bands in a limited space.
· With a cutting edge that can cut lightly and produces a clean cross-section, finished exclusively for copper wires.
· The cut end of the binding band is less likely to jump out, thus preventing hand injuries.
· Chamfering of sharp projections of the rotating part prevents inadvertent injuries and promotes safe work.
[Applications]
· Ideal for cutting soft wires such as copper.à partir de∗ ： 29.24 € Délai d'expédition minimum ： 8 jours *Prix unitaire/configuration de base
-
Pince coupante miniature N-35
HOZAN
Miniature nippers with an anti-static grip to enable use at electronics sites.
[Features]
· Anti-static (ESD) specification elastomer grip for the handle.
· Adopts a coil spring with excellent durability and recoverability, and does not cause fatigue even when constantly holding the tool.
· For cutting copper wire (thin blade finish).
· The cutting edge is made sharp (shallow angle) to achieve light handling of the handle and excellent sharpness.
[Applications]
· Convenient for cutting copper wire.à partir de∗ ： 29.94 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Pince miniature à long bec P-37
HOZAN
Miniature longnose pliers.
[Features]
· Not knurled.
· Hardness HRC: 46.
· Weight: 60 g.
· ESD control value: Ground resistance Rg < 1 x 10^12 Ω.
[Applications]
· Ideal for narrow and deep spots.
· The grip part is elongated, making it convenient for work in narrow and deep areas.à partir de∗ ： 27.45 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Pinces miniature pour fils P-34
HOZAN
Wide/thin type pliers.
[Features]
· Not knurled.
· Hardness HRC: 42.
· Weight: 40 g.
· ESD control value: Ground resistance Rg < 1 x 10^12 Ω.
[Applications]
· Ideal for extraction and folding.à partir de∗ ： 27.87 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Pince coupante devant N-33
HOZAN
Nippers with a long blade length.
[Features]
· Equipped with coil spring to prevent fatigue even during continuous work.
· As the blade is long, it is possible to cut 4 wires coming out of a modular jack at once.
[Applications]
· Ideal for cutting in deep places (slanted type).à partir de∗ ： 34.78 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Pince coupante devant N-36
HOZAN
Nippers ideal for cutting in deep places.
[Features]
· End component of the nippers has a blade so finish of the cross section is almost flat.
· The thin blade width of 3 mm makes it ideal for densely wired places.
· For cutting in deep places (vertical type).
[Applications]
· Ideal for cutting at dense and deep places.à partir de∗ ： 43.90 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Pince multicoupe N-839
HOZAN
A multi-snip tool that can cut thin plates of aluminum plate in addition to VVR.
[Features]
· Cutting capacity (VCT wire): 3.5 mm2 x 4 cores.
· VVR wire: 3.5 mm2 x 3-cores.
· Aluminum plate: 1.2 mm.
· Copper stranded wire: 8 mm2.
· Hardness HRC (blade): 58.
[Applications]
· Ideal for cutting and stripping thick wires.à partir de∗ ： 32.45 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Pince coupante miniature N-31
HOZAN
Small nippers with a total length of 100 mm to fit the hand for easy use, suitable for precision work.
[Features]
· Cutting edge with emphasis on the cut surface finish for soft wires such as copper wire.
· Small body convenient for cutting binding bands in a limited space.
· Because it is a curved blade that can do side cutting, the band protrudes very little, with consideration given to safety for the fingers.
· Chamfering of sharp projections of the rotating part prevents inadvertent injuries and promotes safe work.
· Anti-static (ESD) specification carbon-free elastomer grip for safe work with electronics.
· Adopts a coil spring with excellent durability and recoverability, reducing fatigue during long-term work.
[Applications]
· The small body makes it convenient for cutting work in limited spaces.à partir de∗ ： 28.66 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Pince miniature ronde P-39
HOZAN
Round mouth type pliers that do not hurt the workpiece.
[Features]
· Not knurled.
· Gripping parts are rounded so the target object can be held without causing damage.
[Applications]
· Ideal for various types of manual work.à partir de∗ ： 27.33 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Ciseaux de précision N-55
HOZAN
Nipper with a high-precision finish achieved via a combination of high-durability material and precision machining.
[Features]
· HOZAN's precision series made of alloy steel molded in precision grinding with toughness and hardness used for cutting tools.
· Enables safe precision wiring work without short circuit, discharge or scratches to parts.
· The machined handle portion has been thinned down to 1.7 mm, opens and closes smoothly, and features improved durability.
· Provides high toughness to the inner material hidden by the grip with an electrostatic discharge (ESD) specification.
· The precision set pin provides a box joint structure with fewer backlashes and smooth sliding part.
· Produces a full flush cut with only a single line, without burrs on the cut cross section.
[Applications]
· Optimal for work in narrow places with its fine blade size.à partir de∗ ： 70.98 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Pince à long bec P-14
HOZAN
Compact general-purpose pliers.
[Features]
· Coil spring device and elastomer grip adopted to reduce fatigue during continuous work.
· Anti-slip knurling helps to hold the workpiece firmly.
· The blade has HRC58 hardness capable of cutting 2.6 mmφ (diameter 2.6 mm) copper wire and 2 mm2 copper stranded wire.
[Applications]
· Convenient for cutting copper wire, etc. General purpose type.à partir de∗ ： 24.96 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Pince coupante N-23
HOZAN
Nippers that come equipped with a coil spring to prevent fatigue even during continuous work.
[Features]
· Uses an elastomer grip which is soft on the hands.
· Equipped with coil spring to prevent fatigue even during continuous work.
· Long blade length.
· Can be used to cut the wires coming out of the modular jack at once.
· Not too long and not too short to be a size that feels just right.
[Applications]
· Cutting wiring cords, etc.à partir de∗ ： 31.28 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Pince en plastique N-25
HOZAN
[Caractéristiques]
Pour le découpage et l'ébavurage des portes.
Porte de produits en plastique moulés par injection. Produit idéal pour la découpe et l'ébavurage.à partir de∗ ： 39.48 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
| Marque |
|---|
| Série du produit |
| à partir de∗ |
| Délai d'expédition minimum ： |
| Product Category |
| Plier Type |
| Plier Type |
| Nipper Type |
| Overall Length(mm) |
| Shaft/hole |
| With or without Spring |
| Steel Wire Cutting Performance(φ/mm) |
| Copper Wire Cutting Performance(φ/mm) |
| Piano Wire Cutting Performance(φ/mm) |
| Plastic Cutting Performance(φ/mm) |
| Stranded Wire Cutting Ability(φ/mm) |
| Stainless steel cutting ability(φ/mm) |
| VA (VVF) Wire Cutting Capacity(φ/mm) |
| With/without tip claw replacement function |
| Tip claw diameter(mm) |
| Compatible Ring Size(mm) |
| Parts Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Marque | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN |
| Série du produit | ||||||||||||||||
| à partir de∗ | 31.61 € *Prix unitaire/configuration de base | 27.90 € *Prix unitaire/configuration de base | 22.95 € *Prix unitaire/configuration de base | 29.24 € *Prix unitaire/configuration de base | 29.94 € *Prix unitaire/configuration de base | 27.45 € *Prix unitaire/configuration de base | 27.87 € *Prix unitaire/configuration de base | 34.78 € *Prix unitaire/configuration de base | 43.90 € *Prix unitaire/configuration de base | 32.45 € *Prix unitaire/configuration de base | 28.66 € *Prix unitaire/configuration de base | 27.33 € *Prix unitaire/configuration de base | 70.98 € *Prix unitaire/configuration de base | 24.96 € *Prix unitaire/configuration de base | 31.28 € *Prix unitaire/configuration de base | 39.48 € *Prix unitaire/configuration de base |
| Délai d'expédition minimum ： | 9 jours | 6 jours | 6 jours | 8 jours | 7 jours | 5 jours | 7 jours | 5 jours | 5 jours | 7 jours | 7 jours | 5 jours | 5 jours | 5 jours | 7 jours | 7 jours |
| Product Category | Pinces de carreleur | Pinces | Pinces | Pinces de carreleur | Pinces de carreleur | Pinces | Pinces | Pinces de carreleur | Pinces de carreleur | Pinces de carreleur | Pinces de carreleur | Pinces | Pinces de carreleur | Pinces | Pinces de carreleur | Pinces de carreleur |
| Plier Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Plier Type | - | Pince à bec | Pince à bec | - | - | Pince à bec | Pince étau | - | - | - | - | Pinces | - | Pince à bec | - | - |
| Nipper Type | Pinces de carreleur | - | - | Pinces de carreleur | Pinces de carreleur | - | - | Pinces de carreleur | Pinces de carreleur | Pinces de carreleur | Pinces de carreleur | - | Pinces de carreleur | - | Pinces de carreleur | Pinces de carreleur |
| Overall Length(mm) | 102.5 | 116 | 125.5 | 128.5 | 128.5 | 138 | 116 | 116 | 117.5 | 190 | 102.5 | 118 | 105 | 150 ～ 163 | 133 | 132.5 |
| Shaft/hole | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| With or without Spring | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible |
| Steel Wire Cutting Performance(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Copper Wire Cutting Performance(φ/mm) | 1 | - | - | 2 | 1.6 | - | - | 1 | 1 | - | 1.6 | - | 1 | 2.6 | 1.6 | - |
| Piano Wire Cutting Performance(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Plastic Cutting Performance(φ/mm) | - | - | - | - | - | - | - | - | 1.5 | - | - | - | - | - | - | 5 |
| Stranded Wire Cutting Ability(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Stainless steel cutting ability(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| VA (VVF) Wire Cutting Capacity(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| With/without tip claw replacement function | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tip claw diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Compatible Ring Size(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Parts Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filtrer par:
Affiner la recherche en précisant les spéc./dim.
-
Product Category
- Pinces
- Pinces
- Pinces de carreleur
- Pièces
-
Plier Type
- Pinces
- Pince pour bague de retenue
-
Plier Type
- Pinces
- Pince étau
- Pince à bec
-
Nipper Type
- Pinces de carreleur
- Pince coupante chauffante
-
Overall Length(mm)
- 36
- 46
- 92
- 100
- 102.5
- 105
- 108
- 110
- 111.5
- 115
- 116
- 117
- 117.5
- 118
- 120
- 123
- 124
- 125
- 125.5
- 126
- 127
- 128
- 128.5
- 130
- 131
- 132
- 132.5
- 133
- 134
- 135
- 138
- 139
- 140
- 140|170|180|130
- 140|180
- 140|180|130|165
- 140|180|165
- 141
- 142
- 143
- 144
- 145
- 146
- 148
- 149
- 150
- 151
- 152
- 152.5
- 153
- 154
- 155
- 156
- 157
- 158
- 158.5
- 159
- 160
- 161
- 162
- 163
- 164
- 165
- 166
- 167
- 168
- 169
- 170
- 170|180
- 171
- 172
- 174
- 175
- 178
- 180
- 180|250
- 181
- 183
- 185
- 186
- 188
- 190
- 192
- 195
- 197
- 199
- 200
- Approx. 200
- 201.5
- 202
- 203
- 204
- 205
- 206
- 208
- 210
- 213
- 214.5
- 215
- 217
- 219
- 220
- 223
- 223.5
- 224
- 225
- 227
- 228
- 229
- 230
- 240
- 242
- 245
- 250
- 260
- 266
- 270
- Approximately 275
- 280
- 282
- Approximately 285
- 290
- 293
- 295
- 297
- 300
- 305
- 310
- 320
- 340
- 400
- 455
- 460
- 560
- 570
- 580
- 585
- 590
- 595
- 600
-
Shaft/hole
- Pour arbre
- Pour trou
- Utiliser avec l'arbre et le trou
-
With or without Spring
- Disponible
- N/A
-
Steel Wire Cutting Performance(φ/mm)
-
Copper Wire Cutting Performance(φ/mm)
-
Piano Wire Cutting Performance(φ/mm)
-
Plastic Cutting Performance(φ/mm)
-
Stranded Wire Cutting Ability(φ/mm)
-
Stainless steel cutting ability(φ/mm)
-
VA (VVF) Wire Cutting Capacity(φ/mm)
-
With/without tip claw replacement function
- Disponible
- N/A
-
Tip claw diameter(mm)
-
Compatible Ring Size(mm)
-
Parts Type
- Pointe de lame
- Ressort
- Griffe de pointe de pince pour anneau de retenue
Affiner la recherche en spécifiant le fabricant
-
- MUROMOTO TEKKO (45)
- HOZAN (16)
- TSUNODA (16)
- KNIPEX (13)
- KTC(KYOTO TOOL) (11)
- ENGINEER (10)
- FUJIYA (10)
- KEIBA (7)
- THREE PEAKS GIKEN (7)
- SMATO (6)
- TRUSCO NAKAYAMA (4)
- IGARASHI PLIERS (3)
- LINDSTROM (3)
- ANEX (1)
- AS ONE (1)
- M & M (1)
- SIGNET (1)
- MAEDAKINNZOKU (1)
- HANDIWORK (0)
- SUPER TOOL (0)
- TRAD (0)
- H & H (0)
- NEPROS (0)
- ONISHI MANUFACTURING (0)
- RITTAL (0)
- WELLER (0)
- HANAZONO TOOL (0)
- SK 11 (0)
- E VALUE (0)
- HAZET (0)
- BAHCO (0)
- BERNSTEIN AG (0)
- WEIDMUELLER (0)
- LOBTEX (0)
- RENNSTEIG (0)
- WIHA (0)
- PHOENIX CONTACT (0)
- 엔더블유에스 (0)
Affiner la recherche en précisant le type de données CAO
-
- 2D
- 3D
Catégories relatives à « Pinces/tenailles »
-
- Clés / clés polygonales /clés à cliquet
- Clés à six pans
- Clés anglaises
- Clés Torx
- Clés à douille
- Tournevis
- Pinces/tenailles
- Ensembles d'outils / boîtes à outils
- Embouts de tournevis
- Brucelles
- Outils d'entretien automobile
- Outils de plomberie et de climatisation
- Outils pour la tôle
- Outils destinés aux installations électriques
-
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.