KAMEDA DENKI Supports de montage

?* À propos du délai d'expédition et des prix

• 

  Mini support, support auxiliaire【10 pièces par conditionnement】

  KAMEDA DENKI

  This auxiliary bracket is convenient for mounting wiring ducts and small components.
  
  [Features]
  · Can be flexibly used for the support of wiring and small components.
  · Grove conformation with series of holes allows for flexible positioning.
  · The product can be further bent for compatibility with hard-to-mount areas.

  à partir de∗ ：	5.93 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Collier pour tuyau

  KAMEDA DENKI

  Open board frame pipe fitting.
  
  [Features]
  · Made from steel plate, so it is lightweight and unbreakable.
  · Has a chrome plated finish and requires no painting.
  · Comes with a set U bolt for convenience.

  à partir de∗ ：	12.39 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Support type L L40, type monotrou

  KAMEDA DENKI

  An L-bracket for supporting piping.

  à partir de∗ ：	9.48 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  U Canada【1-20 pièces par conditionnement】

  KAMEDA DENKI

  In addition to the switchboard’s construction material, it contains U-type channels that allow for electrical projects, etc.

  • Remise sur volume

  à partir de∗ ：	12.87 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Support de barre BHX

  KAMEDA DENKI

  Inserted into low-pressure bus bars for support.
  
  [Features]
  · Capable of a broad range of copper band support, from 8 mm to 20 mm.
  · The width of the groups between face A and face B differs, so please use the group that matches the plate thickness of the copper band.
  · Insulation bolts are included, so please choose a product number based on the width of the copper band.

  à partir de∗ ：	8.87 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Multicanal, type KC【1-20 pièces par conditionnement】

  KAMEDA DENKI

  Perforated C type channel with unlimited applications, including electrical work, piping, air-conditioning work, and switchboards.
  
  [Features]
  · Perforated C type channel with unlimited applications, including electrical work, piping, air-conditioning work, and switchboards.

  • Remise sur volume

  à partir de∗ ：	23.54 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Support de protection S19【10 pièces par conditionnement】

  KAMEDA DENKI

  A support tool to attach DIN rail relay and other protective terminal covers.
  
  [Features]
  ・Jointly fasten terminal block stopping tools to more easily attach protective covers.
  ・Please use the stopping tool for each terminal block market product.
  ・Two varieties: 20 mm and 35 mm height.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	21.41 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Mini fermoir, fermoir de contrefiche【20 pièces par conditionnement】

  KAMEDA DENKI

  A clasp with adjustable height designed for panel doors and devices.
  
  [Features]
  · Easily adjustable with just a screwdriver.
  · Can be adjusted and fine-tuned after attaching it to a device

  à partir de∗ ：	54.01 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Mini supports, supports de montage pour borniers S【10-50 pièces par conditionnement】

  KAMEDA DENKI

  Auxiliary brackets allow the terminal block to be mounted at an angle.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	7.42 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Raccord de montage Minikanagu, S【10 pièces par conditionnement】

  KAMEDA DENKI

  This product is an auxiliary metal fitting for mounting terminal blocks etc.
  
  [Features]
  ・A mounting hole has now been added, making it easier to use.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	12.26 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Mini connecteur / raccord à fixation rapide【50 pièces par conditionnement】

  KAMEDA DENKI

  A supporting clasp useful for wiring ducts and small parts.
  
  [Features]
  · Convenient adjustment of height and dimensions.
  · Use push-mount ties with KS-14 for easy wiring

  à partir de∗ ：	46.92 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Fermoir universel【1-10 pièces par conditionnement】

  KAMEDA DENKI

  Multi-angle U connection clasp.
  
  [Features]
  · Very useful for putting clasps together in various positions. UN-26 coupler series works with the U-1 and U-26; the UN-38 series works with the U-38 and L-40, and the UN-40 series works with the L-40.
  · The UN-26 series includes parts with attractive nickel plating, making them useful support clasps for interior furniture as well

  à partir de∗ ：	5.01 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Support type L, L40 type à deux trous

  KAMEDA DENKI

  An L-type bracket with holes on both ends.
  
  [Features]
  · Connecting holes included for all mounting types.
  · Lightweight and easily handled.
  · Pre-manufactured for to reduce costs and delivery times.
  · Made of hygienic, rust-resistant stainless steel.
  · Screw holes included for easy attachment to a wooden base

  • Remise sur volume

  à partir de∗ ：	9.43 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Collier【50-200 pièces par conditionnement】

  KAMEDA DENKI

  An auxiliary collar for tightening U fixtures.
  
  [Features]
  - A high-strength spacer for equipment mounting/installation.

  à partir de∗ ：	27.37 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Contrefiche à montage rapide, côté charnière

  KAMEDA DENKI

  A hinge-side strut for supporting and opening/closing the inside doors of panel boards.
  
  [Features]
  · Both hinge type and fixed type are available.
  ▪ Supports 5 types of distribution boards of varying depths.
  · Lightweight while retaining adequate strength.
  · The center door can be removed by removing the hinge pin

  à partir de∗ ：	8.61 €
  Délai d'expédition minimum ：	11 jours

  *Prix unitaire/configuration de base

• 

  Contrefiche à montage rapide, côté récepteur de charnière

  KAMEDA DENKI

  A receiver-side strut for supporting and opening/closing the inside doors of panel boards.
  
  [Features]
  · Both hinge type and fixed type are available.
  ▪ Supports 5 types of distribution boards of varying depths.
  · Lightweight while retaining adequate strength.
  · The center door can be removed by removing the hinge pin

  à partir de∗ ：	8.26 €
  Délai d'expédition minimum ：	11 jours

  *Prix unitaire/configuration de base

• 

  Contrefiche à montage rapide, type fixe

  KAMEDA DENKI

  A fixed strut strut for supporting the inside doors of panel boards.
  
  [Features]
  · Both hinge type and fixed type are available.
  ▪ Supports 5 types of distribution boards of varying depths.
  · Lightweight while retaining adequate strength.
  · The center door can be removed by removing the hinge pin

  à partir de∗ ：	9.23 €
  Délai d'expédition minimum ：	11 jours

  *Prix unitaire/configuration de base

• 

  Support de barre, BHS

  KAMEDA DENKI

  A holder for screwing in low-voltage bus bars.
  
  [Features]
  · Freely adjustable bus bar interval widths for supporting each bus bar vertically.
  · Stays in place with a single bolt; compatible with a wide range of copper-band dimensions.
  · Made of polypropylene reinforced with glass fiber, providing ample strength

  à partir de∗ ：	5.49 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Barre plate

  KAMEDA DENKI

  This is a flat bar with holes, with limitless applications in electrical work, piping, air conditioning work, wiring boards, etc.

  • Remise sur volume

  à partir de∗ ：	18.99 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Rail libre renforcé, type multifonction

  KAMEDA DENKI

  A reinforced, multifunctional DIN rail with a useful center nut.
  
  [Features]
  · Component can be attached to the rail center by inserting a free nut* on the inside.
  *Use the NS square nut for DA-301 and 302. N2 and N0 types can also be used.
  · Components that are not DIN rail-compatible can be mounted on this rail. .
  · DIN rail type of terminal block and compact terminal block (Higashizawa RT series or Kasuga TR series) can be mounted on the same rail.
  · By using the AC or NF bases, all types of components can be mounted.
  · Strong torsion resistance due to the unique form which does not shake even when used in long lengths.
  · Heavy-duty parts can also be mounted stably.
  · A simple design where the mounting hole pitch of 25 mm fits the duct hole pitch of 50 mm.

  à partir de∗ ：	10.15 €
  Délai d'expédition minimum ：	13 jours

  *Prix unitaire/configuration de base

• 

  Rail libre (trou long)

  KAMEDA DENKI

  A DIN standard compliant 35mm-width rail. (long hole)
  
  [Features]
  - Made of aluminum for light weight, ease of handling, and a nice finish.
  - Cutting is easy; no need to perform anti-rust treatment on the cut ends.
  - Any part compatible with JIS and DIN-standard rails can be mounted, regardless of manufacturer.
  - Parts and terminal blocks can be freely installed on and removed from any position on the rail, letting it accommodate design changes and added circuits.
  - Even parts which are not DIN rail compatible can be mounted using an attachment bracket such as an NF base

  Fichiers CAD 2D disponibles

  à partir de∗ ：	4.96 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Multi-angles type Z

  KAMEDA DENKI

  This is a Z-type angle with limitless applications in electrical work, air conditioning work, wiring boards etc.

  • Remise sur volume

  à partir de∗ ：	125.12 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Support à montage rapide, KH【10 pièces par conditionnement】

  KAMEDA DENKI

  A bracket for mounting wiring and other things by gripping it at an angle.
  
  [Features]
  - Bracket is fixed with one screw, minimizing the work required to form holes.
  - With the KH-65 and KH-100, the wiring can be directly fixed in place using a zip tie.
  - Brackets with insulation coating also available.

  à partir de∗ ：	18.55 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Mini raccord - Plateforme de montage d'interrupteurs S-14【1-10 pièces par conditionnement】

  KAMEDA DENKI

  Fitting for mounting switches and knobs.
  
  [Features]
  S-14Z is a Z-type for easy retrofitting.
  S-14F can be mounted onto free rail (DIN rail) at any location.

  à partir de∗ ：	3.66 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Mini support, montage d'interrupteurs, ZK【10 pièces par conditionnement】

  KAMEDA DENKI

  The ZK series of brackets is used to mount switches and volume controls.
  
  [Features]
  - A total of five different switch mounting hole sizes are provided: 9 φ, 13 φ, 22 φ, 25 φ, and 30 φ, providing compatibility with all switches and volume controls.
  - Each size supports both one mounting point and two mounting points; multiple mounting points of three or more are also supported by combining multiple instances of the above.
  - The switch mounting surface is wide, making mounting of nameplates easy.
  - For the 9 φ and 13 φ versions, there is a single small hole at the 0° and 90° positions for locking, so both vertical and horizontal uses are supported.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	25.82 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Montage de conduit MINI Canada【10 pièces par conditionnement】

  KAMEDA DENKI

  A tool for mounting a control panel rear door wiring duct.
  
  [Features]
  ・Inserting a metal bracket into the pilot lamp or operation switch to secure the duct avoids the need to place stud bolts.
  ・3 varieties for use with 22φ, 25φ, and 30φ.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	16.71 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Mini support, connexion / montage【10 pièces par conditionnement】

  KAMEDA DENKI

  This is an auxiliary bracket for the mounting, connection, etc. of ducting, wiring, or small components.
  
  [Features]
  · All brackets include tap holes for component mounting, so there is no need for the use of nuts (excluding S-5).
  · S-11 and S-11B are used when directly connecting U-1 or U-26 (the S-11B includes a 9Φ hole rather than a tap hole).
  · The S-20-25 and S-20-32 are sturdy right-angle connection brackets. They can be used for anchoring heavy objects.

  à partir de∗ ：	8.28 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Support triangulaire

  KAMEDA DENKI

  This is a triangular bracket for piping support.
  
  [Features]
  · This is a bracket which is used to support wall surface piping.
  · The stay is welded and is sturdier than L type brackets.
  · Both sides are the same length, so it can be used facing either up, down, left or right.

  à partir de∗ ：	29.74 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Fermoir de maintien de câbles

  KAMEDA DENKI

  A clasp for affixing high-voltage lines to epoxy insulators.
  
  [Features]
  - For wiring high-voltage switchboards, high-voltage support insulators, isolators, and shutoff switches.
  - Manufactured following the JIS standard for resin formation technology (JISC3851) for stable quality.
  - Smaller, lighter, more shock resistant, and provides better electrical and mechanical properties than traditional porcelain insulators.
  - EP-O wire clasp sold separately.

  à partir de∗ ：	3.28 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

Loading...