MISUMI Straight Center Pins(Shaft diameter tolerance:0/-0.005)


Données à afficher
30
45
60
Trier
  1. 1
Marque
Série du produit
à partir de
Délai de livraison minimum :
Material
Surface treatment
Head thickness
Shaft diameter tolerance
D/P (Shaft diameter)(mm)
Tip shape
With/without cooling hole
Applicable ejector sleeves inner diameter tolerance

    Straight Center Pins With Tip Processed -High Speed Steel SKH51/Shaft Diameter (P) Designation (0.01mm Increments) Type-

      Straight Center Pins With Tip Processed -High Speed Steel SKH51/Shaft Diameter (D) Selection Type-

      Marque

      MISUMI

      MISUMI

      Série du produit

      Straight Center Pins With Tip Processed -High Speed Steel SKH51/Shaft Diameter (P) Designation (0.01mm Increments) Type-

      Straight Center Pins With Tip Processed -High Speed Steel SKH51/Shaft Diameter (D) Selection Type-

      à partir de

      -

      -

      Délai de livraison minimum : Devis Devis
      MaterialSKH51SKH51
      Surface treatmentNoNo
      Head thickness4mm(T4) / 6mm(JIS) / 8mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS)
      Shaft diameter tolerance0/-0.0050/-0.005
      D/P (Shaft diameter)(mm)0.8 ~ 11.991 ~ 12
      Tip shapeC / G / T / R / BC / G / T / R / B
      With/without cooling holeNoNo
      Applicable ejector sleeves inner diameter tolerance--

      Loading...

      1. 1

      Catégories relatives à Straight Center Pins