SMC Unités FRL（Diamètre de raccordement：NPT3/4）

?* À propos du délai d'expédition et des prix

• 

  Régulateur de pression avec filtre / Filtre régulateur de pression AW20 à 60-B / Filtre régulateur de pression avec fonction de retour AW20K à 60K-B

  SMC

  Filter regulators and filter regulators with backflow function, with both filter and regulator integrated in one unit.
  [Features]
  · Helps save on space, and requires less piping.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	78.11 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  Vanne à démarrage en douceur, AV2000 / 3000 / 4000 / 5000

  SMC

  Low power consumption Soft Start-Up Valve AV2000/3000/4000/5000 Series.
  [Features]
  · Start-up valves for a low-speed air supply which gradually raises the initial pressure in an air system and for quick exhausting by cutting off the air supply.
  · Includes manually operated supply and exhaust functions.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	180.56 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  AV2000/3000/4000/5000-A, Valve de coupure et mise en pression progressive

  SMC

  SMC soft start-up valve.
  [Features]
  · Start-up valves for a low-speed air supply which gradually raises the initial pressure in an air system and for quick exhausting by cutting off the air supply.
  · Power Consumption: 0.35 W.
  · Improved flow rate characteristics: Up to 2.3 times C [dm3/(s·bar)]: 9.2.
  · Energy saving: No air flow when switching the main valve.
  · Improved adjustment sensitivity with a low speed air supply.
  · Features a built-in silencer to save on space and for less overall work.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	184.84 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  AW10-40-A, Filtre AW/Combinaison de régulateur

  SMC

  SMC modular-type F.R.L. combination unit.
  [Features]
  · Uses a transparent bowl guard.
  · A transparent bowl guard with improved environmental resistance that provides all-round protection.
  · The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
  · Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
  · Superior visibility: 360°
  · The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle
  · Without corrosion. The use of a resin body ensures there is no rusting.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	78.11 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  AC20-B to AC60-B, Nouveau modèle modulaire, filtre à air + régulateur + lubrificateur

  SMC

  [Features]
  · Improved visibility and environmental resistance.
  · The bowl is completely covered by transparent bowl guard.
  & nbspThe inside can be seen from all angles (360°).
  & nbspThe bowl is completely protected from the external environment, helping improve safety.
  · Easy to work with.
  & nbspThe element and bowl are combined into one unit, making it possible to replace the element by hand.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	134.84 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  AC20B-B to AC60B-B, Nouveau modèle modulaire, filtre à air + régulateur

  SMC

  [Features]
  · Improved visibility and environmental resistance.
  · The bowl is completely covered by transparent bowl guard.
  & nbspThe inside can be seen from all angles (360°).
  & nbspThe bowl is completely protected from the external environment, helping improve safety.
  · Easy to work with.
  & nbspThe element and bowl are combined into one unit, making it possible to replace the element by hand.
  · The amount of space required for maintenance has been reduced.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	129.27 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  AC10-40-A (FRL), Nouveau modèle modulaire, filtre à air + régulateur + lubrificateur

  SMC

  SMC modular-type F.R.L. combination unit.
  [Features]
  · Uses a transparent bowl guard.
  · A transparent bowl guard with improved environmental resistance that provides all-round protection.
  · The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
  · Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
  · Superior visibility: 360°
  · The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle.
  · Weight reduction: reduced by up to 90 g
  · Without corrosion. The use of a resin body ensures there is no rusting.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	134.84 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  AC20D-40D-A (FRL), Nouveau modèle modulaire, filtre régulateur + filtre micronique

  SMC

  SMC modular-type F.R.L. combination unit.
  [Features]
  · Uses a transparent bowl guard.
  · A transparent bowl guard with improved environmental resistance that provides all-round protection.
  · The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
  · Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
  · Superior visibility: 360°
  · The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle.
  · Weight reduction: reduced by up to 90 g
  · Without corrosion. The use of a resin body ensures there is no rusting.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	207.53 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  Électrovannes de décharge à 3 voies / pour la décharge de la pression résiduelle avec trou de serrure (simple effet) VHS20/30/40/50

  SMC

  Conforming To OSHA Standard, Pressure Relief 3-Port Valve (Single Action) With Locking Holes by SMC.
  [Features]
  · The safety-measure manually operated valve can be used to prevent accidents caused by residual pressure in pneumatic lines.
  · Designed so that the supply and exhaust status of the air flow can be checked at a glance.
  · When residual pressure is being released, the valve handle can be locked in position to prevent accidental operation.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	51.02 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  AC20A-B to AC60A-B, Nouveau modèle modulaire, filtre régulateur + lubrificateur

  SMC

  [Features]
  · Improved visibility and environmental resistance.
  · The bowl is completely covered by transparent bowl guard.
  & nbspThe inside can be seen from all angles (360°).
  & nbspThe bowl is completely protected from the external environment, helping improve safety.
  · Easy to work with.
  & nbspThe element and bowl are combined into one unit, making it possible to replace the element by hand.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	133.94 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  AC10A-40A-A (FRL), Nouveau modèle modulaire, filtre régulateur + lubrificateur

  SMC

  Air Combination Filter Regulator + Lubricator with a bowl that is completely covered by transparent bowl guard.
  [Features]
  · The inside can be seen from all angles (360°).
  · The bowl is protected from the external environment, ensuring high levels of safety.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	123.63 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  AC10B-40B-A (FRL), Nouveau modèle modulaire, filtre à air + régulateur

  SMC

  SMC modular-type F.R.L. combination unit.
  [Features]
  · Uses a transparent bowl guard.
  · A transparent bowl guard with improved environmental resistance that provides all-round protection.
  · The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
  · Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
  · Superior visibility: 360°
  · The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle.
  · Weight reduction: reduced by up to 90 g
  · Without corrosion. The use of a resin body ensures there is no rusting.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	90.53 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  Électrovannes 3 voies pour la décharge de pression résiduelle avec trou de serrure (double effet) VHS2510/3510/4510/5510

  SMC

  With this OSHA compliant Pressure Relief 3-Port Valve (Double Action) With Locking Holes, the supply and exhaust status of air flow can be checked at a glance.
  [Features]
  · The safety-measure manually operated valve can be used to prevent accidents caused by residual pressure in pneumatic lines.
  · A specification in which when residual pressure is being released, the valve handle can be locked in position to prevent accidental operation.
  · The double action type is structured so that the handle has to be pushed down before turning, helping prevent accidental operation.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	54.55 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  E*00-A, Fixations de brides d'extrémité

  SMC

  A piping adapter that allows for easy installation and removal of the component without removing piping.
  [Features]
  · Attachment for AC Series Air Combination.
  · E100-M5-A applicable model: AC10□-A.
  · E200-□01-A, 02-A, 03-A applicable model: AC20□-A.
  · E300-□02-A, 03-A, 04-A applicable models: AC25□-A, AC30□-A.
  · E400-□02-A, 03-A, 04-A, □06-A applicable model: AC40□-A.
  · E500-□06-A applicable model: AC40□-06-A.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	5.48 €
  Délai d'expédition minimum ：	37 jours

  *Prix unitaire/configuration de base

• 

  Filtre/régulateur / vanne de régulation du filtre, 10/20/21-AW-B, 10/20/21-AWKB

  SMC

  [Caractéristiques]
  "Série 10": Série propre
  · Convient à l'environnement des salles blanches.
  · Empêche la génération de poussière dans les salles blanches.
  "Série 20": Spécifications sans cuivre et sans fluor
  · Convient aux environnements où les matériaux à base de cuivre et de fluor sont indésirables.
  · Dimensions extérieures sont identiques à celles du modèle norme .
  "Série 21": Cuivre/ Fluor/ sans silicone + faible génération de poussière
  · Convient aux environnements avec des restrictions de Matériau en Cuivre, Fluor et silicone .
  · Structure équivalente à la série propre (graisse et forme de conditionnement différentes de la série propre).

  à partir de∗ ：	147.39 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

Loading...