TRUSCO NAKAYAMA Roues avec arbres（Type：Rabat avec arbre）

?* À propos du délai d'expédition et des prix

• 

  "Mini roue à rabat en papier" (diamètre de l'arbre : 3mm)【5 pièces par conditionnement】

  TRUSCO NAKAYAMA

  [Features]
  · For ordinary metals. As the space between the polishing cloths is somewhat open, it causes less clogging and can be used until the end. It has a high heat dissipation effect to prevent distortion of the workpiece. Can be used for any type of polishing, including inner surfaces, curved surfaces, and flat surfaces. The rotational speed can be adjusted to polish (hairline processing possible) everything from soft to hard materials.
  [Applications]
  · For polishing small irregular shapes, such as semicylindrical interior and corner parts.
  · Tool used: micro grinder. (Pneumatic/Electric)

  à partir de∗ ：	29.88 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  "Roue à rabat avec arbre diamant" (type tout en diamant / diamètre de l'arbre : 3mm)

  TRUSCO NAKAYAMA

  [Features]
  · For glass, stone and non-ferrous metals. Precision finishing can be done with high polishing power.
  · Electrodeposited genuine all diamond sheet is used.
  [Applications]
  · For surface polishing of difficult-to-cut materials, polishing on the inner surface and curved surface.
  · Tool used: straight grinder.

  à partir de∗ ：	19.20 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Roue à rabat (diamètre de l'arbre : 6mm)【5 pièces par conditionnement】

  TRUSCO NAKAYAMA

  [Features]
  · For ordinary metals. As the space between the polishing cloths is somewhat open, it causes less clogging and can be used until the end.
  · It can be used to polish anything including inner surface, curved surface and flat surface.
  · Only the side can be used. As it has a shaft, it can be used flexibly, and the direction of the hairline is constant.
  · Fits well onto the shape of the workpiece to be processed.
  · Autogenous action enables continuous grinding with new abrasive surfaces constantly formed.
  · It has a high heat dissipation effect to prevent distortion of the workpiece.
  [Applications]
  · Commercially available electric grinder, electric drill, drilling machine, etc.
  · Deburring, rust removal, pre-coat polishing, inner-surface and curved-surface polishing, polishing of metal surface.
  · Tool used: straight grinder. (Pneumatic/Electric)

  à partir de∗ ：	23.93 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Roues à lamelles / à clapet avec tige filetée Spin (arbre interchangeable), SF-30/40/50/60【5 pièces par conditionnement】

  TRUSCO NAKAYAMA

  [Features]
  · Shaft is screw-in type, so mounting and removing can be done with one touch.
  · Shaft can be replaced while chuck is mounted.
  · By using a spin shaft (sold separately), shaft length can be changed for standard length (40 mm) and hole depth (100 mm).
  [Applications]
  · For rust removal, deburring, and brazing.
  · Polishing interior of cylinders, corners, etc.
  · Tools used: straight grinder (pneumatic/electric) / electric drill / drilling machine.

  à partir de∗ ：	33.64 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Roues à lamelles / roues à lamelles sur tige filetée (arbre interchangeable) SS-6040/SS-6100

  TRUSCO NAKAYAMA

  [Features]
  · Shaft is screw-in type, so mounting and removing can be done with one touch.
  · Once chuck power section is mounted to shaft, polished section can be changed.
  · 2 items: standard shaft length (SS-6040) (40 mm), for deep holes (SS-6100) (100 mm).
  [Applications]
  · Shaft for spin screw type flap wheels.

  à partir de∗ ：	2.72 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  "Roue à rabat Miracle" (type diagonal / diamètre de l'arbre : 6mm)【5 pièces par conditionnement】

  TRUSCO NAKAYAMA

  [Features]
  · For ordinary metals.
  · Has diagonally attached flaps and gently contacts workpieces.
  · It utilizes the characteristics of a general-purpose flap wheel with shaft to improve the grindability and sustainability. (Increased by 30% compared to conventional)
  [Applications]
  · For rust/corrosion removal, deburring, and pipe internal surface polishing.
  · For grinding metals, curved surfaces of wood, and irregularly shaped items.
  · Tool used: straight grinder. (air + electric)

  à partir de∗ ：	35.89 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  "Roue à rabat avec arbre diamant" (type tout en diamant / diamètre de l'arbre : 6mm)

  TRUSCO NAKAYAMA

  [Features]
  · For glass, stone and non-ferrous metals. Precision finishing can be done with high polishing power.
  · Electrodeposited genuine diamond sheet is used.
  [Applications]
  · For surface polishing of difficult-to-cut materials, polishing on the inner surface and curved surface.
  · Tool used: straight grinder.

  à partir de∗ ：	55.71 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  "Roue à rabat biseauté" (diamètre de l'arbre : 6mm)【5 pièces par conditionnement】

  TRUSCO NAKAYAMA

  [Features]
  · For ordinary metals. As the polishing cloth is implanted in a way that covers the base, it is possible to simultaneously polish the bottom and the side. It has improved versatility and efficiency in grinding while maintaining the characteristics of the flap wheel with shaft.
  · No clogging, allowing a uniform finish to be achieved throughout.
  · Autogenous action enables continuous grinding with new abrasive surfaces.
  · The polished material is not burnt or distorted due to the air cooling effect.
  [Applications]
  · For polishing bottom surfaces, corners, flat surfaces, and curved surfaces.
  · Tool used: straight grinder. (air + electric)

  à partir de∗ ：	46.17 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  "GP Top Mini" (type fileté M7 X P0.75)【5 pièces par conditionnement】

  TRUSCO NAKAYAMA

  [Features]
  · All-round type that features an abundant grain size variation to handle rough finishing polishing. Grinding burn, a shortcoming of elastic grindstones, is prevented, and it has high grindability and life 5 to 6 times as long as conventional products. In addition, it has cushioning characteristics compared to a grinding wheel, and contacts the ground material more softly.
  [Applications]
  · Optimal for removing spot-welding burrs on automobiles, home appliances, etc., and especially polishing molds.
  · For use with ordinary metal.
  · Tool used: air grinder.

  • Remise sur volume

  à partir de∗ ：	22.89 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  "Buffle souple sur arbre" (diamètre de l'arbre 6mm)【5 pièces par conditionnement】

  TRUSCO NAKAYAMA

  [Features]
  · For ordinary metals.
  · As it is finely slit into the polishing cloth, it is ideal for polishing irregular surfaces as well as fine parts.
  · The autogenous property prevents clogging.
  · Can be used to polish with a soft touch.
  · It has improved versatility in grinding while maintaining the characteristics of the flap with shaft.
  [Applications]
  · For polishing uneven surfaces, wood and plastic surfaces, and for light deburring work.
  · Tool used: straight grinder. (air + electric)

  à partir de∗ ：	57.80 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  "Roue avec arbre en nylon" (diamètre de l'arbre : 6mm)【5 pièces par conditionnement】

  TRUSCO NAKAYAMA

  [Features]
  · It can be used with both stainless steel and general metals.
  · The nylon fiber acts as a cushion to avoid shaving too much off the polished material.
  · Abrasive material is adhered to nylon fiber non-woven fabric using a special resin adhesive which provides excellent resistance to chemicals and water, and features superior elasticity.
  · Autogenous action constantly generates a new surface so it is difficult to clog and delivers consistent surface roughness of the finished surface from initial grinding through to final.
  · Maintains its shape for a long time. Edges also do not chip in a disorderly manner.
  [Applications]
  · Removing paint and polishing prior to plating. Ideal for polishing of stainless steel, iron, alloys, wood and plastics.
  · Tool used: straight grinder. (air + electric)

  à partir de∗ ：	48.94 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  "Roue en nylon mélangé" (diamètre de l'arbre : 6mm)【5 pièces par conditionnement】

  TRUSCO NAKAYAMA

  [Features]
  · Mixed type of nylon and paper (A abrasive grains).
  · Uses a nylon abrasive agent in which abrasive is set between intertwined nylon fibers, so compared to paper abrasive cloths, the fibers embedded in the nylon abrasive agent act as a cushion, preventing excessive snagging of the workpiece.
  · A new surface will always appear thanks to its autogenous properties, which prevent clogging and maintain a constant surface roughness of the finishing surface from the beginning until the end of polishing.
  · Compact, lightweight tool especially for scratch and hairline removal.
  [Applications]
  · Optimal for hairline work on stainless steel and aluminum.
  · For removal of scratches, burrs and beads on metallic products.
  · For polishing the wooden surface of wooden products or coating polishing.
  · Tool used: straight grinder. (air + electric)

  à partir de∗ ：	55.00 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  "Mini rabat en nylon" (type dur / diamètre de l'arbre : 3mm)【10 pièces par conditionnement】

  TRUSCO NAKAYAMA

  [Features]
  · Hard type for both stainless steel and general metals.
  · Wears less and grinds well thanks to its nylon non-woven fabric which has been compressed and hardened appropriately.
  · Works quietly, does not produce odor like rubber grindstones, generates less dust, and will not break.
  [Applications]
  · Finishing and polishing of stainless steel, aluminum and other nonferrous machining finishes.
  · Hairline work.
  · Finish polishing of molds.
  · Tools used: micro grinder, electric drill.

  à partir de∗ ：	64.85 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  "Mini roue en nylon" (type souple / diamètre de l'arbre : 3mm, avec 1 adaptateur)【25 pièces par conditionnement】

  TRUSCO NAKAYAMA

  [Features]
  · Gentle type made from non-woven nylon fibers, suitable for gentle processing of finished products.
  [Applications]
  · Ideal for polishing narrow grooves, etc.
  · Hairline work on small items, stainless steels and aluminum.
  · For satin finishing prior to mirror finishing.
  · Tools used: micro grinder, electric drill.

  à partir de∗ ：	35.93 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  "Roue en sisal sur arbre" (diamètre de l'arbre : 6mm)【5 pièces par conditionnement】

  TRUSCO NAKAYAMA

  [Features]
  · Sisal (hemp + cotton) buff enabling beautiful polishing with a sharp cut.
  · Used for intermediate polishing and base polishing of stainless steel, aluminum, etc. with oil and fat abrasive.
  · Ideal for paper polishing before mirror finishing.
  [Applications]
  · Steel, stainless steel, aluminum, and other medium polishing and sub polishing.

  • Remise sur volume

  à partir de∗ ：	46.88 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  "Roue en feutre sur arbre" (diamètre de l'arbre : 6mm)【5 pièces par conditionnement】

  TRUSCO NAKAYAMA

  [Features]
  · It can be used with stainless steel and general metals.
  · Felt wheels for the final finish with the use of oil and grease abrasive according to applications.
  [Applications]
  · Glazing and wiping work on mirror finish.
  · Tool used: straight grinder. (air + electric)

  à partir de∗ ：	66.79 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Mini-roue en feutre (diamètre d'arbre 3 mm) / vitesse de fonctionnement maximale (tr/min) : 5000【10 pièces par conditionnement】

  TRUSCO NAKAYAMA

  [Features]
  · A green rouge-based oil-and-grease impregnation-type abrasive that can be used as it is. It produces a beautiful finished surface.
  · It is a felt wheel for final finishing. There are two types, flat and shell types.
  · It can be used with both stainless steel and general metals.
  [Applications]
  · Mirror finish and final polishing on detailed parts.
  · Tools used: micro grinder, electric drill.

  à partir de∗ ：	71.26 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  "Roue à rabat fileté rotative" (arbre remplaçable) arbre rotatif (arbre hexagonal) :

  TRUSCO NAKAYAMA

  Shaft is screw-in type, so mounting and removing can be done with one touch. Once chuck power section is mounted to shaft, polished section can be changed. Shaft for spin screw type flap wheels.

  à partir de∗ ：	2.77 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Roue à rabat en nylon type vis rotative (type échange d'arbre)【5 pièces par conditionnement】

  TRUSCO NAKAYAMA

  It can be used with both stainless steel and general metals. The nylon fiber acts as a cushion to avoid shaving too much off the polished material. Abrasive material is adhered to nylon fiber non-woven fabric using a special resin adhesive which provides excellent resistance to chemicals and water, and features superior elasticity.

  à partir de∗ ：	65.23 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Roue à rabat pour meulage intensif (type diagonal, diamètre de l'arbre : 6mm)【5 pièces par conditionnement】

  TRUSCO NAKAYAMA

  [Features]
  · Flap wheel with grinding speed twice the normal and grinding amount with doubled speed and durability.
  · The flaps are attached diagonally.
  · Zirconia abrasive is used for heavy duty grinding and long service life.
  [Applications]
  · For rust/corrosion removal, deburring, and pipe internal surface polishing.
  · For grinding metals, curved surfaces of wood, and irregularly shaped items.
  · Tool used: straight grinder. (Pneumatic/Electric)

  à partir de∗ ：	50.37 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

Loading...