Vis à billes（Page 2）

?* À propos du délai de livraison

• 

  [PRODUIT ECONOMIQUE] Vis à billes/dia. 20 au pas de 5, 10 ou 25/conforme DIN69051

  MISUMI

  C-BSS

  CAD ：

  2D / 3D

  Délai de livraison minimum ：	8 jours

• 

  Vis à billes de précision, forme BIF

  THK

  [Features]
  · The center ball screw nut assigns a phase to the screws to the left and right sides, reducing shaft direction gaps to zero or less (as in a preloaded state). The ball screw is compact and provides smooth operation.

  CAD ：

  2D / 3D

  Délai de livraison minimum ：	Devis

• 

  Vis à billes rotative de précision, forme DIR

  THK

  This is a THK precision rotary ball screw with a DIR shape.
  · [Structure and features]
  · Structure lead nut rotary ball screw with DIR shape. This nut rotary ball screw features an integrated structure that combines a simple nut ball screw and a support bearing. The ball screw nut uses a deflector method for its ball circulation structure, and the ball screw nut interior has an embedded deflector groove which it follows to the neighboring rolling surface. The load circulates in this way for endless rolling operation.
  · Also, a single center ball screw nut assigns a phase to the screws to the left and right sides, reducing shaft direction gaps to zero or less (as in a preloaded state). Because of this offset preload nut, the unit is more compact and provides smoother operation compared to conventional double nut types (a method where a spacer is inserted between two nuts).

  CAD ：

  2D / 3D

  Délai de livraison minimum ：	Devis

• 

  Vis à billes roulée, forme MTF

  THK

  Recommended tip shape designations are now selectable. If you choose a recommended tip shape designation, accuracy for non-standard lengths can be specified in units of 1 mm, even for C8 and C10 models.
  
  [Features]
  · THK rolling ball screws are low-priced sending screws that modify the screw grinding shaft used in precision ball screws and use a new screw shaft created by combining high accuracy rolling pressing with special surface grinding finishing.
  · Because all the ball rolling surfaces or the combined ball screw nuts have undergone grinding finishing, the gap in the shaft direction is smaller than conventional rolling ball screws, providing smooth operation.
  · Also, an abundant standardized lineup is available so you can select the product that's optimal for your application.

  CAD ：

  2D / 3D

  Délai de livraison minimum ：	Devis

• 

  Vis à billes de précision, produit complet pour bout d'arbre, (forme BNK), diamètre de l'arbre : 10, vis-mère : 10

  THK

  Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.

  • Remise sur volume

  CAD ：

  2D / 3D

  à partir de∗ ：	1,038.07 €
  Délai de livraison minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes de précision, produit complet pour bout d'arbre, (forme BNK), diamètre de l'arbre : 15, vis-mère : 10

  THK

  Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
  
  [Features]
  · The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
  · The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
  · The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.

  • Remise sur volume

  CAD ：

  2D / 3D

  à partir de∗ ：	819.19 €
  Délai de livraison minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes rotative roulée - modèle BLR

  THK

  [Features]
  · This rotary ball screw is a rotary ball screw unit with a unified structure made up of a ball screw nut and a support bearing.
  · The support bearing is a large angular bearing with a contact angle of 60° that provides rigidity in the axial direction where more balls are placed.
  · BLRThe BLR type is available in precision ball screw and rolled ball screw specifications.
  · Smooth operation: provides smooth operation in comparison to the straight line movement of rack and pinion systems. Also, because the screw shaft does not rotate with ball screw nut drive, there is no jumping rope phenomenon, operation is quiet, and heat produced by the unit is reduced.
  · Quiet operation even during high-speed rotation. The BLR type uses an end cap system to scoop up balls extremely quietly, and because the balls are circulated by passing through the interior of the ball screw nut, operation remains quiet even during high-speed rotation.
  · High rigidity: Compared to screw shaft rotation, axial direction rigidity is drastically improved due to the large support bearing.
  · Compact: Because the ball screw nut and support bearing are an integrated structure, the design achieves both high accuracy and a compact size.
  · Simple mounting: Just mount the bolt in the housing to create a simple ball screw nut rotation mechanism.

  CAD ：

  2D / 3D

  Délai de livraison minimum ：	Devis

• 

  Vis à billes rotative de précision - modèle BLR

  THK

  [Features]
  · This rotary ball screw is a rotary ball screw unit with a unified structure made up of a ball screw nut and a support bearing.
  · The support bearing is a large angular bearing with a contact angle of 60° that provides rigidity in the axial direction where more balls are placed.
  · The BLR type is available in precision ball screw and rolled ball screw specifications.
  · Smooth operation: provides smooth operation in comparison to the straight line movement of rack and pinion systems. Also, because the screw shaft does not rotate with ball screw nut drive, there is no jumping rope phenomenon, operation is quiet, and heat produced by the unit is reduced.
  · Quiet operation even during high-speed rotation. The BLR type uses an end cap system to scoop up balls extremely quietly, and because the balls are circulated by passing through the interior of the ball screw nut, operation remains quiet even during high-speed rotation.
  · High rigidity: Compared to screw shaft rotation, axial direction rigidity is drastically improved due to the large support bearing.
  · Compact: Because the ball screw nut and support bearing are an integrated structure, the design achieves both high accuracy and a compact size.
  · Simple mounting: Just mount the bolt in the housing to create a simple ball screw nut rotation mechanism.

  CAD ：

  2D / 3D

  Délai de livraison minimum ：	Devis

• 

  Vis à billes roulée, série BSD, grande vis-mère

  OZAK

  Délai de livraison minimum ：	Devis

• 

  [PRODUIT ECONOMIQUE] Vis à billes roulées/dia. 15 au pas de 5, 10 ou 20/conforme DIN69051

  MISUMI

  C-BSSC,C-BSSCK

  CAD ：

  2D / 3D

  Délai de livraison minimum ：	8 jours

• 

  [PRODUIT ECONOMIQUE] Vis à billes/dia. 10 au pas de 2 ou 4/conforme DIN69051

  MISUMI

  C-BSS

  CAD ：

  2D / 3D

  Délai de livraison minimum ：	8 jours

• 

  [PRODUIT ECONOMIQUE] Vis à billes/dia. 15 au pas de 5, 10 ou 20/conforme DIN69051

  MISUMI

  C-BSS

  CAD ：

  2D / 3D

  Délai de livraison minimum ：	8 jours

• 

  Vis à billes de précision avec retenue à bille, forme SBKH

  THK

  [Features]
  · Because this ball screw includes a ball retainer, there are no collisions with other balls, and wear and tear from balls grinding against one another is eliminated. This in turn improves the holding power of grease.
  · For this reason, it provides low noise and small torque fluctuation. Long-term maintenance-free operation.
  · Also provides superior high speed performance due to its ideal circulation structure, strengthened circulation part, and adoption of a ball retainer.

  CAD ：

  2D / 3D

  Délai de livraison minimum ：	Devis

• 

  Vis à billes de précision avec retenue à bille, forme SBK

  THK

  [Features]
  · Because this ball screw includes a ball retainer, there are no collisions with other balls, and wear and tear from balls grinding against one another is eliminated. This in turn improves the holding power of grease.
  · For this reason, it provides low noise and small torque fluctuation. Long-term maintenance-free operation.
  · Also provides superior high speed performance due to its ideal circulation structure, strengthened circulation part, and adoption of a ball retainer.

  CAD ：

  2D / 3D

  Délai de livraison minimum ：	Devis

• 

  Vis à billes de précision avec retenue à bille, forme SDA

  THK

  [Features]
  · Because this ball screw includes a ball retainer, there are no collisions with other balls, and wear and tear from balls grinding against one another is eliminated. This in turn improves the holding power of grease.
  · For this reason, it provides low noise and small torque fluctuation. Long-term maintenance-free operation.
  · Also provides superior high speed performance due to its ideal circulation structure, strengthened circulation part, and adoption of a ball retainer.

  CAD ：

  2D / 3D

  Délai de livraison minimum ：	Devis

• 

  Vis à billes de précision, sans usinage en bout d'arbre, forme MBF

  THK

  [Features]
  · This product has no machining on the shaft ends, and is a standard series precision ball screw mass-produced at specified lengths.
  · Additional work on screw shaft ends can be easily performed.
  · Also, a variety of nut shapes are available to suit different purposes such as the BNFN shape double nut, BNF shape single nut, BIF shape offset preload nut, MDK shape miniature ball screw, and MBF shape.
  · Dust-proof: The following model number nuts have labyrinth seals mounted.

  • Remise sur volume

  CAD ：

  2D / 3D

  à partir de∗ ：	3.24 €
  Délai de livraison minimum ：	Devis

  *Prix unitaire/configuration de base

• 

  Vis à billes roulée, forme JPF

  THK

  [Features]
  · THK rolling ball screws are low-priced sending screws that modify the screw grinding shaft used in precision ball screws and use a new screw shaft created by combining high accuracy rolling pressing with special surface grinding finishing.
  · Because all the ball rolling surfaces or the combined ball screw nuts have undergone grinding finishing, the gap in the shaft direction is smaller than conventional rolling ball screws, providing smooth operation.
  · An abundant standardized lineup is available so you can select the product that's optimal for your application.
  · Lead accuracy to achieves a C7 class: Aside from the C10 class, the shaft tips for the C7 and C8 classes are both standardized for movement amount tolerance, so they can be used for a wide variety of applications.
  · Screw shaft ball rolling surface roughness of 0.20a or less: After rolling is completed, the ball rolling surface of the screw shaft undergoes a special surface polishing process, finishing the surface at a roughness of 0.20a or less, identical to the precision ball screw product line after screw grinding.
  · Ball screw nut ball rolling surface grinding and finishing: Rotating ball screw nuts also undergo a ball rolling surface grinding and finishing process just like precision ball screws, which provides durability and smooth operation.
  · High dust-proofing effectiveness: Because the ball screw nut has either a compact labyrinth seal or a brush seal built-in, it operates with low friction and high level dust-proofing, lengthening the life of ball screws.

  CAD ：

  2D / 3D

  Délai de livraison minimum ：	Devis

• 

  Vis à billes roulée, forme WTF

  THK

  [Features]
  · High speed sending ball screw which achieves DN values of 100,000 through the adoption of a new circulation structure.
  · Compatible with the nut outer diameter and mount hole size of conventional WTF shape products, so it can be used as a replacement.
  (WHF1530, WHF2040, WHF2550)

  CAD ：

  2D / 3D

  Délai de livraison minimum ：	Devis

• 

  Vis à billes roulée, type sans précharge (unité simple d'écrou) BNT

  THK

  [Features]
  · THK rolling ball screws are low-priced sending screws that modify the screw grinding shaft used in precision ball screws and use a new screw shaft created by combining high accuracy rolling pressing with special surface grinding finishing.
  · Because all the ball rolling surfaces or the combined ball screw nuts have undergone grinding finishing, the gap in the shaft direction is smaller than conventional rolling ball screws, providing smooth operation.
  · Also, an abundant standardized lineup is available so you can select the product that's optimal for your application.

  • Remise sur volume

  CAD ：

  2D / 3D

  à partir de∗ ：	227.85 €
  Délai de livraison minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes de précision, produit fini en bout d'arbre, (forme BNK), diamètre de l'arbre 12, vis-mère 5

  THK

  Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
  
  [Features]
  · The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
  · The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
  · The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
  · An appropriate amount of grease is enclosed with ball screw nuts.
  · Also, for ball screw nuts larger than the BNK0802 shape model, a labyrinth seal is built-in (BNK1510 shape, BNK1520 shape, BNK1616 shape, BNK2020 shape, and BNK2520 shape use a combination end cap).
  · In addition, for cases where contaminants are a concern, dust-proof equipment (bellows, etc.) must always be used to completely cover the screw shafts.
  · BNK Type: Dimensions Table—A15-116 Standardized ball screw with a screw shaft diameter of 4 to 25 mm, and lead of 1 to 20 mm.

  • Remise sur volume

  CAD ：

  2D / 3D

  à partir de∗ ：	581.47 €
  Délai de livraison minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes de précision, produit complet pour bout d'arbre, (forme BNK), diamètre de l'arbre : 16, vis-mère : 16

  THK

  Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
  
  [Features]
  · The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
  · The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
  · The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
  · An appropriate amount of grease is enclosed with ball screw nuts.
  · Also, for ball screw nuts larger than the BNK0802 shape model, a labyrinth seal is built-in (BNK1510 shape, BNK1520 shape, BNK1616 shape, BNK2020 shape, and BNK2520 shape use a combination end cap).
  · In addition, for cases where contaminants are a concern, dust-proof equipment (bellows, etc.) must always be used to completely cover screw shafts.
  · BNK A ball screw with shape standardization to screw shaft diameter ø4 - 25 mm and lead 1 - 20 mm.

  CAD ：

  2D / 3D

  à partir de∗ ：	887.59 €
  Délai de livraison minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes roulée, forme BLK

  THK

  Recommended tip shape designations are now selectable. If you choose a recommended tip shape designation, accuracy for non-standard lengths can be specified in units of 1 mm, even for C8 and C10 models.

  CAD ：

  2D / 3D

  Délai de livraison minimum ：	Devis

• 

  Vis à billes de précision MBF

  THK

  [Features]
  · THK precision ball screws are available in an abundant variety of standardized types with screw shafts and nuts that have undergone high accuracy grinding machining to ensure that customers can choose a product that is optimal for their applications.
  · Abundant combinations of shaft diameter and lead: Within the series, return pipe nuts have the most abundant variety of types available of any part. With all kinds of nut shapes and screw shaft lead combinations such as compact simple nuts and large lead end cap nuts, you can select the shaft diameter and lead combination that fits your usage conditions.
  · Standard stock products (products with unfinished shaft ends and products with finished shaft ends) available: The unfinished shaft end types are mass produced types with specified lengths. Types with finished shaft ends have shaft ends machined to match the support units.
  · Complies with JIS (ISO) accuracy standards: The accuracy of ball screws is quality controlled according to JIS standards (JIS B1192-1997.)

  CAD ：

  2D / 3D

  Délai de livraison minimum ：	Devis

• 

  Vis à billes roulée, série MV (sans traitement de surface de l'arbre de vis)

  MORIMOTO_SHAFT

  Generally speaking, ball screws have a dramatically higher transmission efficiency than slide screws. We have blanks in abundant variations, and can provide quick delivery thanks to our proprietary machining technology.

  CAD ：

  2D

  Délai de livraison minimum ：	6 jours

• 

  Vis à billes roulées/Écrous compacts/dia. 10 au pas de 4

  MISUMI

  BSSC,BSSCK

  CAD ：

  2D / 3D

  Délai de livraison minimum ：	18 jours

• 

  Vis à billes de précision, produit complet pour bout d'arbre, (forme BNK), diamètre de l'arbre : 4, vis-mère : 1

  THK

  Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.

  • Remise sur volume

  CAD ：

  2D / 3D

  à partir de∗ ：	631.09 €
  Délai de livraison minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes de précision, produit complet pour bout d'arbre, (forme BNK), diamètre de l'arbre : 6, vis-mère : 1

  THK

  Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
  
  [Features]
  · The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
  · The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
  · The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.

  CAD ：

  2D / 3D

  à partir de∗ ：	330.61 €
  Délai de livraison minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes de précision, produit complet pour bout d'arbre, (forme BNK), diamètre de l'arbre : 8, vis-mère : 1

  THK

  Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
  
  [Features]
  · The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
  · The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
  · The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
  [Dust-proofing and lubrication.]
  · An appropriate amount of grease is enclosed with ball screw nuts.
  · Also, for ball screw nuts larger than the BNK0802 shape model, a labyrinth seal is built-in (BNK1510 shape, BNK1520 shape, BNK1616 shape, BNK2020 shape, and BNK2520 shape use a combination end cap).
  · In addition, for cases where contaminants are a concern, dust-proof equipment (bellows, etc.) must always be used to completely cover screw shafts.

  • Remise sur volume

  CAD ：

  2D / 3D

  à partir de∗ ：	646.49 €
  Délai de livraison minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes de précision, forme BLW

  THK

  CAD ：

  2D / 3D

  Délai de livraison minimum ：	Devis

• 

  Vis à billes de précision de type DIK

  THK

  [Features]
  · THK precision ball screws are available in an abundant variety of standardized types with screw shafts and nuts that have undergone high accuracy grinding machining to ensure that customers can choose a product that is optimal for their applications.
  · With abundant combinations of shaft diameter and lead, return pipe nuts have the most variety of types available of any part in the series. With all kinds of nut shapes and screw shaft lead combinations such as compact simple nuts and large lead end cap nuts, you can select the shaft diameter and lead combination that fits your usage conditions.
  · Standard stock products (products with unfinished shaft ends and products with finished shaft ends) available: The unfinished shaft end types are mass produced types with specified lengths. Types with finished shaft ends have shaft ends machined to match the support units.
  · Complies with JIS (ISO) accuracy standards: The accuracy of ball screws is quality controlled according to JIS standards (JIS B1192-1997.)

  CAD ：

  2D / 3D

  Délai de livraison minimum ：	Devis

• 

  Vis à billes de précision de type DKN

  THK

  [Features]
  · THK precision ball screws are available in an abundant variety of standardized types with screw shafts and nuts that have undergone high accuracy grinding machining to ensure that customers can choose a product that is optimal for their applications.
  · With abundant combinations of shaft diameter and lead, return pipe nuts have the most variety of types available of any part in the series. With all kinds of nut shapes and screw shaft lead combinations such as compact simple nuts and large lead end cap nuts, you can select the shaft diameter and lead combination that fits your usage conditions.
  · Standard stock products (products with unfinished shaft ends and products with finished shaft ends) available: The unfinished shaft end types are mass produced types with specified lengths. Types with finished shaft ends have shaft ends machined to match the support units.
  · Complies with JIS (ISO) accuracy standards: The accuracy of ball screws is quality controlled according to JIS standards (JIS B1192-1997.)

  CAD ：

  2D / 3D

  Délai de livraison minimum ：	Devis

• 

  Vis à billes de précision, forme WGF

  THK

  CAD ：

  2D / 3D

  Délai de livraison minimum ：	Devis

• 

  Vis à billes roulée, forme CNF

  THK

  Recommended tip shape designations are now selectable. If you choose a recommended tip shape designation, accuracy for non-standard lengths can be specified in units of 1 mm, even for C8 and C10 models.
  
  [Features]
  · THK rolling ball screws are low-priced sending screws that modify the screw grinding shaft used in precision ball screws and use a new screw shaft created by combining high accuracy rolling pressing with special surface grinding finishing.
  · Because all the ball rolling surfaces or the combined ball screw nuts have undergone grinding finishing, the gap in the shaft direction is smaller than conventional rolling ball screws, providing smooth operation.
  · Also, an abundant standardized lineup is available so you can select the product that's optimal for your application.
  · Aside from the C10 class, the shaft tips for the C7 and C8 classes are both standardized for movement amount tolerance.

  CAD ：

  2D / 3D

  Délai de livraison minimum ：	Devis

• 

  Vis à billes roulée, type sans précharge (unité simple d'écrou) BLK

  THK

  [Features]
  · Uses an end cap method for high speed rotation, providing stable operation.

  CAD ：

  2D / 3D

  à partir de∗ ：	375.55 €
  Délai de livraison minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes roulée, type sans précharge (unité simple d'écrou) BTK

  THK

  • Remise sur volume

  CAD ：

  2D / 3D

  à partir de∗ ：	182.78 €
  Délai de livraison minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes roulée, type sans précharge (unité simple d'écrou) WTF

  THK

  [Features]
  · THK rolling ball screws are low-priced sending screws that modify the screw grinding shaft used in precision ball screws and use a new screw shaft created by combining high accuracy rolling pressing with special surface grinding finishing.
  · Because all the ball rolling surfaces or the combined ball screw nuts have undergone grinding finishing, the gap in the shaft direction is smaller than conventional rolling ball screws, providing smooth operation.
  · Also, an abundant standardized lineup is available so you can select the product that's optimal for your application.
  · Aside from the C10 class, the shaft tips for the C7 and C8 classes are both standardized for movement amount tolerance, so they can be used for a wide variety of applications.
  · After rolling is completed, the ball rolling surface of the screw shaft undergoes a special surface polishing process, finishing the surface at a roughness of 0.20a or less, identical to the precision ball screw product line after screw grinding.
  · Rotating ball screw nuts also undergo a ball rolling surface grinding and finishing process just like precision ball screws, which provides durability and smooth operation.
  · After rolling is completed, the screw shaft is treated with either high frequency or charcoal immersion quenching, followed by a special surface grinding and finishing process. Due to the manufacturing methods used, this product is comparatively cheaper than the precision ball screw line made through grinding.
  · Because the ball screw nut has either a compact labyrinth seal or a brush seal built-in, it operates with low friction and high level dust-proofing, lengthening the life of ball screws.

  CAD ：

  2D / 3D

  à partir de∗ ：	410.61 €
  Délai de livraison minimum ：	23 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes roulée, type sans précharge (unité simple d'écrou) CNF

  THK

  A no preloading type rolling ball screw with a single unit CNF shape nut.
  [Features]
  · Due to the large lead, this unit can be combined with long nuts in four types of load conditions, and has a long life.

  • Remise sur volume

  CAD ：

  2D / 3D

  à partir de∗ ：	538.30 €
  Délai de livraison minimum ：	Devis

  *Prix unitaire/configuration de base

• 

  Vis à billes de précision, produit complet pour bout d'arbre, (forme BNK), diamètre de l'arbre : 10, vis-mère : 2

  THK

  Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
  
  [Features]
  · The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
  · The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
  · The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.

  CAD ：

  2D / 3D

  à partir de∗ ：	612.25 €
  Délai de livraison minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes de précision, produit complet pour bout d'arbre, (forme BNK), diamètre de l'arbre : 10, vis-mère : 4

  THK

  Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.

  • Remise sur volume

  CAD ：

  2D / 3D

  à partir de∗ ：	537.00 €
  Délai de livraison minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes de précision, produit complet pour bout d'arbre, (forme BNK), diamètre de l'arbre : 14, vis-mère : 2

  THK

  Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
  
  [Features]
  · The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
  · The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
  · The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
  · An appropriate amount of grease is enclosed with ball screw nuts.
  · Also, for ball screw nuts larger than the BNK0802 shape model, a labyrinth seal is built-in (BNK1510 shape, BNK1520 shape, BNK1616 shape, BNK2020 shape, and BNK2520 shape use a combination end cap).
  · In addition, for cases where contaminants are a concern, dust-proof equipment (bellows, etc.) must always be used to completely cover screw shafts.

  • Remise sur volume

  CAD ：

  2D / 3D

  à partir de∗ ：	518.20 €
  Délai de livraison minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes de précision, produit complet pour bout d'arbre, (forme BNK), diamètre de l'arbre : 15, vis-mère : 20

  THK

  Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
  
  [Features]
  · The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
  · The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
  · The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.

  • Remise sur volume

  CAD ：

  2D / 3D

  à partir de∗ ：	808.70 €
  Délai de livraison minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes de précision, produit complet pour bout d'arbre, (forme BNK), diamètre de l'arbre : 20, vis-mère : 10

  THK

  Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.

  • Remise sur volume

  CAD ：

  2D / 3D

  à partir de∗ ：	834.57 €
  Délai de livraison minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes de précision, produit complet pour bout d'arbre, (forme BNK), diamètre de l'arbre : 20, vis-mère : 20

  THK

  Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
  
  [Features]
  · The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
  · The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
  · The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.

  • Remise sur volume

  CAD ：

  2D / 3D

  à partir de∗ ：	1,007.32 €
  Délai de livraison minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes de précision, produit complet pour bout d'arbre, (forme BNK), diamètre de l'arbre : 8, vis-mère : 2

  THK

  Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
  
  [Features]
  · The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
  · The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
  · The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.

  • Remise sur volume

  CAD ：

  2D / 3D

  à partir de∗ ：	564.37 €
  Délai de livraison minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Vis à billes de précision, produit complet pour bout d'arbre, (forme BNK), diamètre de l'arbre : 12, vis-mère : 2

  THK

  Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
  
  [Features]
  · The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
  · The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
  · The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.

  • Remise sur volume

  CAD ：

  2D / 3D

  à partir de∗ ：	622.50 €
  Délai de livraison minimum ：	7 jours

  *Prix unitaire/configuration de base

Loading...