Supports pour éléments optiques（Page 2）
Rechercher en précisant la catégorie inférieure
Supports de miroir
Supports à mouvement transversal
Adaptateurs à mouvement transversal
Supports de lentille
Supports de polariseur
Supports de prisme
Supports de filtre
Sténopés, diaphragmes
Supports laser- Supports fixes, accessoires de support
Stations optiques
| Nombre de jours d'expédition |
|
|---|
?* À propos du délai d'expédition et des prix
-
Supports de trous pour broche variables
SURUGA SEIKI
The rotating disc features eight small-diameter holes of different sizes every 45°. Positioning for each hole is done by a click-stop method. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 163.27 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Porte-lentilles, modèle coaxial
SURUGA SEIKI
A holder that can fix lenses of any diameter and always keep the center of the held lens constant. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 162.29 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Adaptateur à rotation
SURUGA SEIKI
[Features]
· An adapter for attaching and rotating adapters for FC connectors and adapters for ferrules.
· Used by attaching to various types of cross motion holder.
· When using, fix the rotation adapter in the holder and then set the adapter and device.
· The scale features degrees markings every 1°.- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 134.97 € Délai d'expédition minimum ： 10 jours *Prix unitaire/configuration de base
-
Adaptateur pour lentille d'objectif
SURUGA SEIKI
Used by attaching to various types of cross motion holder.
[Features]
· An adapter for objective lenses.
· Used by attaching to various types of cross motion holder.
· The objective lens is fixed by screwing in.- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 38.20 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Supports de miroir activés par le haut, modèle compact
SURUGA SEIKI
[Features]
· A small top operated mirror holder with excellent stability and operability.
· Can hold small mirrors up to ø30. The tilt can be adjusted in the two axes.
· The tilt axis can be locked using the included lock nut.
· The mirror can be fixed using either adhesive or via the three-point support method.
· Types with a rod and types without a rod are available.
· With the three-point support type, mirrors from ø20 to ø30 mm can be fixed by replacing the pins on two of the points.- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 144.27 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Supports de miroir, modèle compact et mouvement précis
SURUGA SEIKI
A holder that can hold small mirrors up to ø30. The tilt can be adjusted in the two axes.
[Features]
· The fine-movement resolution is 0.7°/rotation, two times that of F58N.
· Adhesive type and three-point support type fixing are available for the mirror fixing methods.
· Both the adhesive and screw types are available with or without a rod.
· With the rod-less type, M3 or M6 screws are used for fixing.
· With the three-point support type, mirrors from ø20 to ø30 mm can be fixed by replacing the pins on two of the points.- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 108.18 € Délai d'expédition minimum ： 9 jours *Prix unitaire/configuration de base
-
Support de miroir compact à mouvement précis (avec verrouillage)
SURUGA SEIKI
[Features]
· The FM58 with an added tilt-lock nut.
· Adhesive type and three-point support type fixing are available for the mirror fixing methods.
· Both the adhesive and screw types are available with or without a rod.
· With the rod-less type, M3 or M6 screws are used for fixing.
· With the three-point support type, mirrors from ø20 to ø30 mm can be fixed by replacing the pins on two of the points.- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 108.48 € Délai d'expédition minimum ： 9 jours *Prix unitaire/configuration de base
-
Supports de prisme avec mécanisme d'ajustement fin
SURUGA SEIKI
Can rotate prisms, cube beam splitters, and similar other objects and tilt them in the two axes. Prisms are fixed using the slide clamp screw on the upper part and an element clamp screw.- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 226.17 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Support de polariseur avec réglage précis
SURUGA SEIKI
[Features]
· A holder consisting of the F62 type polarizer holder with additional fine adjustment functionality.
· Allows for 360° coarse movement with the clamp loosened. With the clamp tightened, it can perform micro adjustments on the micrometer head to ±4°.
· The F63-30N can be fitted with the F69polarizing prism adapter.
· The scale is structured in a way that allows zero point alignment, and so can be set to any angle from the reference angle.
· Calculating the optical axis of the rod stand.- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 316.01 € Délai d'expédition minimum ： 10 jours *Prix unitaire/configuration de base
-
Supports de filtre avec ressort à lame
SURUGA SEIKI
[Features]
· A holder for holding square and round filters.
· Can be fitted with up to four filters with external diameters of ø50 mm.
· Filters are fixed by inserting them from the top whereupon the leaf spring will push them against the reference surface.
· As the tilt of the filter (even when replacing them) remains constant in relation to the optical axis, the optical axis will not shift dramatically.
· The filters will not abut against each other.
· The filter-contacting portion of the leaf spring is made of resin.- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 126.45 € Délai d'expédition minimum ： 10 jours *Prix unitaire/configuration de base
-
Bague en résine
SURUGA SEIKI
[Features]
· A product for fixing lenses and mirrors to holders by the manufacturer.
· Note that this product has been designed exclusively for holders from the manufacturer.
· Note that even when the diameters are the same, the shapes can differ depending on the product.- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 5.21 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Adaptateur refroidi par eau
SURUGA SEIKI
[Features]
· A water cooling adapter for F125/F126/F127 LD holders
· Connect to water tanks which circulate water at low temperatures to enable superior temperature stability and low temperature control.
· Connect using a 1/4 inch hose (hose not included)- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 106.89 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Précision de support transversal différentiel
SURUGA SEIKI
Can support and hold various types of adapter, and finely adjust them in the YZ axes. Enables a smooth and straight feed. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 341.88 € Délai d'expédition minimum ： 10 jours *Prix unitaire/configuration de base
-
Support à mouvement transversal de précision (type □45)
SURUGA SEIKI
A holder with a through hole of ø14 mm that can support and fix various types of adapter, and finely adjust them in the YZ axes and Yzθyθz axes. Delivers both in terms of thinness and high precision movement.
[Features]
· V-groove rails and cross rollers are used for the guide. Boasts a thickness of just 16 mm (YZ part) and high precision movement.- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 387.89 € Délai d'expédition minimum ： 9 jours *Prix unitaire/configuration de base
-
Support à mouvement transversal de précision (modèle □60)
SURUGA SEIKI
A holder with a through hole of ø25 mm that can support and fix various types of adapter, and finely adjust them in the YZ axes and Yzθyθz axes. Delivers both in terms of thinness and high precision movement.
[Features]
· V-groove rails and cross rollers are used for the guide. Boasts a thickness of just 16 mm (YZ part) and high precision movement.- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 415.88 € Délai d'expédition minimum ： 9 jours *Prix unitaire/configuration de base
-
Support à mouvement transversal de précision, type plaque
SURUGA SEIKI
[Features]
· A holder with a through hole of ø14 mm that can support and fix various types of adapter, and finely adjust them in the YZ axes and Yzθyθz axes.
· A plate type with good stability. Ideal for experiments with low optical axes.- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 396.88 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Supports pour adaptateurs d'élément optique
SURUGA SEIKI
A bracket to which various types of adapter can be mounted. Can be mounted to a tilt stage. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 117.10 € Délai d'expédition minimum ： 23 jours *Prix unitaire/configuration de base
-
Porte-lentilles centrés : pour modèle de lentille collimatrice, sur support
SURUGA SEIKI
[Features]
· Can be used for the construction of optical systems.› Configurer maintenantà partir de∗ ： 58.15 € Délai d'expédition minimum ： 10 jours *Prix unitaire/configuration de base
-
Porte-lentilles centrés : modèle assurant la stabilité / l'exploitation des lentilles collimatées
SURUGA SEIKI
[Features]
· Can be used for the construction of optical systems.› Configurer maintenantà partir de∗ ： 394.07 € Délai d'expédition minimum ： 10 jours *Prix unitaire/configuration de base
-
Porte-lentilles centrés : pour lentille alignée, modèle à rouleau croisé de précision
SURUGA SEIKI
[Features]
· Can be used for the construction of optical systems.› Configurer maintenantà partir de∗ ： 368.94 € Délai d'expédition minimum ： 10 jours *Prix unitaire/configuration de base
-
Porte-lentilles centrés : pour modèle de lentille d'objectif unique, sur support
SURUGA SEIKI
Can be used for optical system constructions. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.- Fichiers CAD 2D disponibles
› Configurer maintenantà partir de∗ ： 85.29 € Délai d'expédition minimum ： 8 jours *Prix unitaire/configuration de base
-
Porte-lentilles centrés : pour la stabilité de la lentille de focalisation simple / modèle axé sur la capacité opérationnelle
SURUGA SEIKI
Can be used for optical system constructions. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 413.86 € Délai d'expédition minimum ： 11 jours *Prix unitaire/configuration de base
-
Porte-lentilles centrés : pour modèle de lentille d'objectif, sur support
SURUGA SEIKI
[Features]
· Can be used for the construction of optical systems.- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 77.45 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Porte-lentilles centrés : pour la stabilité de la lentille de focalisation / modèle axé sur la capacité opérationnelle
SURUGA SEIKI
[Features]
· Can be used for the construction of optical systems.
· When using objective lenses with large outer diameters. The F504-40 series high rigidity cross motion holder is recommended.- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 404.87 € Délai d'expédition minimum ： 10 jours *Prix unitaire/configuration de base
-
Porte-lentilles centrés : pour lentille de focalisation, modèle à rouleau croisé de précision
SURUGA SEIKI
[Features]
· Can be used for the construction of optical systems.
· When using objective lenses with large outer diameters. The F504-40 series high rigidity cross motion holder is recommended.- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 368.94 € Délai d'expédition minimum ： 11 jours *Prix unitaire/configuration de base
-
Supports de polariseur étroits (axe optique : 25mm)
SURUGA SEIKI
A holder used for retaining and rotating polarizing plates, polarizing filters, and wave plates, etc. The optical axis height is standardized at 25 mm from the bottom. Scale notches are placed every 90°.- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 128.90 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Diaphragme iris
SURUGA SEIKI
[Features]
· A holder with an iris diaphragm.
· The aperture diameter is variable from ø1.5 to ø27 mm.
· Rotate the aperture-adjustment knob (shared with the clamp) to fix.- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 203.78 € Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Adaptateur pour diaphragme d'ouverture
SURUGA SEIKI
Used by attaching to various types of cross motion holder. The diaphragm diameter can be changed from ø1 to ø12 mm. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 128.66 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Support de miroir rectangulaire
SURUGA SEIKI
[Features]
· A holder for fixing square mirrors, filters, and projection plates, etc.
· Fix by tightening the two screws.
· The holder is for fixing purposes only.
· The holder is available with a width of 60 mm or 100 mm.- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 65.03 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Support différentiel en croix haute rigidité
SURUGA SEIKI
A precision cross motion holder that can support and hold various types of adapter, and finely adjust them in the YZ axes. Includes a direct lock mechanism that can directly fix the movable parts. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 351.07 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Support de miroir haute stabilité
SURUGA SEIKI
A product that is ideal for applications where a high level of precision and alignment is necessary, or where stability and operability are important. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 144.31 € Délai d'expédition minimum ： 10 jours *Prix unitaire/configuration de base
-
Supports de miroir hautes performances (axe optique : 25mm)
SURUGA SEIKI
[Features]
· A compact version of the FM532.
· Designed with an optical axis height of 25 mm. For use with the Opt Station.
· A product that is ideal for applications where a high level of precision and alignment is necessary, or where stability and operability are important.- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 117.16 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Support croisé différentiel haute performance
SURUGA SEIKI
Can be mounted with various types of adapter and then finely adjust them in the YZ axes. Capable of a smooth and straight feed. Designed with an optical axis height of 25 mm from the bottom. For use with the Opt Station.- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 377.82 € Délai d'expédition minimum ： 10 jours *Prix unitaire/configuration de base
-
Supports de filtre (en Y)
SURUGA SEIKI
[Features]
· A holder for setting round and square type filters.
· Can be fitted with up to four filters with external diameters of ø50 mm.
· Filters are inserted from the top, but as they are only placed down, they can be angled depending on the filter thickness.- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 129.71 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Supports de filtre (forme de bloc)
SURUGA SEIKI
[Features]
· A holder for setting filters with diameters of ø15 mm or ø20 mm.
· The optical axis height is standardized at 25 mm from the bottom.
· Can be fitted with two filters.
· Fix by loosening the clamp and sliding the holding part backwards or forwards in line with the thickness of the filter.
· Filters with a thickness of up to 4 mm are supported.
· The bottom plate features an M4 tapped hole. Mount a rod to change to a rod type.
· The F561-20 can also be used as a simplified polarizing element holder by directly turning the element.- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantà partir de∗ ： 125.94 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Support de miroir rond cinématique
CHUO PRECISION INDUSTRIAL
[Features]
· A three-point support type mirror holder.
· The sample is fixed using set screws and a pad (round and square types only).
· The set screw can be turned using a straight slot flathead screwdriver (not included). The round mirror holder is for circular optical devices. The tilt can be adjusted in the two axial directions.
· The square mirror holder if for square optical devices. The tilt can be adjusted in the two axial directions.
· The grooved mirror holder is for rectangular optical devices. The tilt can be adjusted in the two axial directions (square optical devices can also be used).- Fichiers CAD 2D disponibles
› Configurer maintenantà partir de∗ ： 160.45 € Délai d'expédition minimum ： 16 jours *Prix unitaire/configuration de base
-
Support de miroir simple
CHUO PRECISION INDUSTRIAL
[Features]
· The mirror holder fixes optical devices by affixing them. As such, it can be used with both circular and rectangular shaped objects.
· A kinematic type in which the tilt can be adjusted using the inclined fulcrum (right-top) as a guide.
· Available with a shaft (ø8 mm, length 60 mm) or with a base plate (long hole for M6 screws).- Fichiers CAD 2D disponibles
› Configurer maintenantà partir de∗ ： 106.69 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Support de type rainuré
CHUO PRECISION INDUSTRIAL
[Features]
· A holder for mirrors and charts, etc. Insert the corresponding item into the groove and fix in place with a clamp screw.
· Duracon® is inserted at the tip of the clamp screw and a fluoropolymer sheet is attached to the other side in order to avoid scratching of the clamped item.
"Duracon®" is a registered trademark of Polyplastics Co., Ltd. in Japan and other countries.- Fichiers CAD 2D disponibles
› Configurer maintenantà partir de∗ ： 63.88 € Délai d'expédition minimum ： 8 jours *Prix unitaire/configuration de base
-
Adaptateur
CHUO PRECISION INDUSTRIAL
[Features]
· For changing the aperture to fit the holder when using a lens that does not fit- Fichiers CAD 2D disponibles
› Configurer maintenantà partir de∗ ： 44.48 € Délai d'expédition minimum ： 8 jours *Prix unitaire/configuration de base
-
Porte-lentilles de type en V
CHUO PRECISION INDUSTRIAL
[Features]
· The HL-C30, HL-C70, and HL-C100 are lens holders with grooves for fixing lenses. There are three products available depending on the maximum size of the object that can be fixed.- Fichiers CAD 2D disponibles
› Configurer maintenantà partir de∗ ： 102.83 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Porte-lentilles cylindrique
CHUO PRECISION INDUSTRIAL
[Features]
· A lens holder with a groove for fixing cylindrical lenses.- Fichiers CAD 2D disponibles
› Configurer maintenantà partir de∗ ： 115.53 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Porte-lentilles
CHUO PRECISION INDUSTRIAL
[Features]
· A holder for circular lenses (can also be used with mirrors).
· Metal frame and shaft only. Does not include a tilt adjustment function.- Fichiers CAD 2D disponibles
› Configurer maintenantà partir de∗ ： 123.36 € Délai d'expédition minimum ： 13 jours *Prix unitaire/configuration de base
-
Support de polariseur
CHUO PRECISION INDUSTRIAL
[Features]
· The POH-30, POH-50 hold polarizing plates and wave plates and is used for the adjustment of polarizing surfaces, etc.
· For devices such as Glan-Thompson prisms and wave plates with small external shapes, combine with an adapter for polarizer element holders.
· When the coarse movement clamp is loosened, it can move coarsely over 360°. When the coarse movement clamp is tightened, it can perform fine adjustments on the micrometer head.
· Since the scale ring moves independently, the zero point can be set to any angle.
· The C-301- (1) is a holder for holding cube type prisms. It does not include a tilt adjustment function, etc.› Configurer maintenantà partir de∗ ： 338.16 € Délai d'expédition minimum ： 15 jours *Prix unitaire/configuration de base
-
Supports de caméra
CHUO PRECISION INDUSTRIAL
[Features]
· The HC-T3 is a product in which a ø12 mm shaft is attached to a free camera platform with tripod threads (nominal size 1/4)
· The HC-T2N is a product in which a ø12 mm shaft is attached to a single-handle camera platform with tripod threads (nominal size 1/4).- Fichiers CAD 2D disponibles
› Configurer maintenantà partir de∗ ： 115.67 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Jeu de bagues de pressage
CHUO PRECISION INDUSTRIAL
[Features]
· A Duracon® ring set consisting of a press ring and cushioning material.
"Duracon®" is a registered trademark of Polyplastics Co., Ltd. in Japan and other countries.- Fichiers CAD 2D disponibles
› Configurer maintenantà partir de∗ ： 25.38 € Délai d'expédition minimum ： 8 jours *Prix unitaire/configuration de base
| Marque |
|---|
| Série du produit |
| CAD |
| à partir de∗ |
| Délai d'expédition minimum |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Marque | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | CHUO PRECISION INDUSTRIAL | CHUO PRECISION INDUSTRIAL | CHUO PRECISION INDUSTRIAL | CHUO PRECISION INDUSTRIAL | CHUO PRECISION INDUSTRIAL | CHUO PRECISION INDUSTRIAL | CHUO PRECISION INDUSTRIAL | CHUO PRECISION INDUSTRIAL | CHUO PRECISION INDUSTRIAL | CHUO PRECISION INDUSTRIAL |
| Série du produit | Support de miroir compact à mouvement précis (avec verrouillage) | Porte-lentilles centrés : pour modèle de lentille collimatrice, sur support | Porte-lentilles centrés : modèle assurant la stabilité / l'exploitation des lentilles collimatées | Porte-lentilles centrés : pour lentille alignée, modèle à rouleau croisé de précision | Porte-lentilles centrés : pour modèle de lentille d'objectif unique, sur support | Porte-lentilles centrés : pour modèle de lentille d'objectif, sur support | Porte-lentilles centrés : pour lentille de focalisation, modèle à rouleau croisé de précision | ||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
| à partir de∗ | 163.27 € *Prix unitaire/configuration de base | 162.29 € *Prix unitaire/configuration de base | 134.97 € *Prix unitaire/configuration de base | 38.20 € *Prix unitaire/configuration de base | 144.27 € *Prix unitaire/configuration de base | 108.18 € *Prix unitaire/configuration de base | 108.48 € *Prix unitaire/configuration de base | 226.17 € *Prix unitaire/configuration de base | 316.01 € *Prix unitaire/configuration de base | 126.45 € *Prix unitaire/configuration de base | 5.21 € *Prix unitaire/configuration de base | 106.89 € *Prix unitaire/configuration de base | 341.88 € *Prix unitaire/configuration de base | 387.89 € *Prix unitaire/configuration de base | 415.88 € *Prix unitaire/configuration de base | 396.88 € *Prix unitaire/configuration de base | 117.10 € *Prix unitaire/configuration de base | 58.15 € *Prix unitaire/configuration de base | 394.07 € *Prix unitaire/configuration de base | 368.94 € *Prix unitaire/configuration de base | 85.29 € *Prix unitaire/configuration de base | 413.86 € *Prix unitaire/configuration de base | 77.45 € *Prix unitaire/configuration de base | 404.87 € *Prix unitaire/configuration de base | 368.94 € *Prix unitaire/configuration de base | 128.90 € *Prix unitaire/configuration de base | 203.78 € *Prix unitaire/configuration de base | 128.66 € *Prix unitaire/configuration de base | 65.03 € *Prix unitaire/configuration de base | 351.07 € *Prix unitaire/configuration de base | 144.31 € *Prix unitaire/configuration de base | 117.16 € *Prix unitaire/configuration de base | 377.82 € *Prix unitaire/configuration de base | 129.71 € *Prix unitaire/configuration de base | 125.94 € *Prix unitaire/configuration de base | 160.45 € *Prix unitaire/configuration de base | 106.69 € *Prix unitaire/configuration de base | 63.88 € *Prix unitaire/configuration de base | 44.48 € *Prix unitaire/configuration de base | 102.83 € *Prix unitaire/configuration de base | 115.53 € *Prix unitaire/configuration de base | 123.36 € *Prix unitaire/configuration de base | 338.16 € *Prix unitaire/configuration de base | 115.67 € *Prix unitaire/configuration de base | 25.38 € *Prix unitaire/configuration de base |
| Délai d'expédition minimum | 5 jours | 5 jours | 10 jours | 5 jours | 5 jours | 9 jours | 9 jours | 5 jours | 10 jours | 10 jours | 5 jours | 5 jours | 10 jours | 9 jours | 9 jours | 5 jours | 23 jours | 10 jours | 10 jours | 10 jours | 8 jours | 11 jours | 5 jours | 10 jours | 11 jours | 5 jours | Jour même | 5 jours | 5 jours | 5 jours | 10 jours | 5 jours | 10 jours | 5 jours | 5 jours | 16 jours | 5 jours | 8 jours | 8 jours | 5 jours | 5 jours | 13 jours | 15 jours | 5 jours | 8 jours |
Loading...
Filtrer par :
Stock
-
- Afficher les articles en stock uniquement
Type de données CAO
-
- 2D
- 3D
Catégories relatives à Supports pour éléments optiques
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.