Plaques de base

?* À propos du délai d'expédition et des prix

• 

  Tige universelle

  SURUGA SEIKI

  The length, diameter, and tap can be configured from the table. Please ask for special taps and special outer diameters. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Sélectionner et comparer

  › Configurer maintenant
  Délai d'expédition minimum ：	12 jours

• 

  Plaques d'outillage (pour M3)

  SURUGA SEIKI

  [Features]
  · An aluminum breadboard for Opt Station 40 mm stages.
  · Includes a handle so that assembled optical systems can be carried as is.
  · The upper surface features 16 mm M3 tapped holes.
  · Flatness: 0.20 mm or less.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	688.02 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Bases magnétiques

  SURUGA SEIKI

  [Features]
  · Switch the lever ON/OFF to attach or detach to or from magnetized vibration removal boards and laboratory tables etc.
  · Allows for fixing in any position, regardless of the position of the tapped holes.
  · A variety of types are available; from highly magnetized types to thin types. Select the most appropriate product to match the intended application.
  · Rod stands etc., can be mounted with mounting screws of A22-1: M16P=1
  · Use an adapter plate to mount □40 mm and □60 mm stages.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	82.01 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Supports en L

  SURUGA SEIKI

  Can be attached to a rod. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	38.64 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Plaque de suspension

  SURUGA SEIKI

  A plate for attaching to stage units and positioning tilt stages. Used when stage units are interfering with each other, making it difficult to place them in close proximity to each other.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	116.28 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Supports de base

  SURUGA SEIKI

  A carrier for A10 connections. Used for fixing optical benches to bases such as those on optical surface plates etc. A magnet plate may be required depending on the base. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	109.55 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Petite platine d'expérimentation

  SURUGA SEIKI

  Allows for the easy modularization of optical systems.
  
  [Features]
  · The smallest breadboard in the product line-up.
  · Features a modularized Opt Station and 40 mm stage combination etc. Can be fixed to the top of vibration removal boards and breadboards and easily moved and stored.
  · The top surface is configured of a 25 mm matrix of tapped holes for the M6 type, and 8 mm or 16 mm for the M3 type. All holes are through-holes.
  · Features M6 bolt holes for fixing to vibration removal boards etc.
  · Allows for the easy modularization of optical systems configured with Opt Stations and a 40 mm stage, etc.

  • Stock

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	185.70 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Collier en croix sur support

  CHUO PRECISION INDUSTRIAL

  [Features]
  · Used to retain holder shafts and poles orthogonally (at 90°) to each other.
  · Available with three diameters; ø8 mm, 12 mm, and ø20 mm. Products are available combining different diameters.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	36.26 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Vis de fixation de plaque de base【10 pièces par conditionnement】

  CHUO PRECISION INDUSTRIAL

  [Features]
  · Can be used for fixing to surface plates.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	35.00 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Pôles

  SURUGA SEIKI

  A stainless steel pole. Used by standing on various types of stage, base, or similar using an M16P = 1 thread, and then connecting to cross clamps, etc. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Sélectionner et comparer

  › Configurer maintenant
  Délai d'expédition minimum ：	10 jours

• 

  Tiges

  SURUGA SEIKI

  A stainless steel rod for mounting optical parts. A holder for the Opt Station that can be used as a rod type holder. Includes M4 screws.
  
  [Features]
  ■ [A40M/A41M] A stainless steel rod for mounting optical parts.
  · A holder for the Opt Station that can be used as a rod type holder. Includes M4 screws.
  ■ [A40/A41/A42] A stainless steel rod for mounting optical parts.
  · Includes an M6 (P=1) screw, which can be used together with models A40 to A42, enabling mounting to various types of holder etc. From A40 to A42, M6P=1 screws are included, making mounting possible on a variety of holders.
  · There is a through hole with a diameter of ø3 mm or 4 mm at the bottom of the M6 screw. Insert a wrench or similar into this hole when mounting to a holder in order to fix it securely.

  Sélectionner et comparer

  › Configurer maintenant
  Délai d'expédition minimum ：	9 jours

• 

  Tige Shirttail

  SURUGA SEIKI

  By using this rod, holders and other similar items can be set to various optical axis heights without having to purchase new rods. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Sélectionner et comparer

  › Configurer maintenant
  Délai d'expédition minimum ：	9 jours

• 

  Jeu Paul, hauteur variable

  SURUGA SEIKI

  Use for changing the height of the height adjustment platform, etc. Any length within 300 mm can be specified in increments of 1 mm. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Sélectionner et comparer

  › Configurer maintenant
  Délai d'expédition minimum ：	13 jours

• 

  Maquette en aluminium (poignées A64)

  SURUGA SEIKI

  Laboratory units can be configured in saving space installations by placing on existing laboratory benches. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	70.87 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Plaques d'outillage en aluminium (pour M4 / M6)

  SURUGA SEIKI

  Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Laboratory units can be configured in saving space installations by placing on existing laboratory benches.
  · Units configured on the breadboard can be moved to and stored at any location.
  · Made of aluminum and the surface is anodized. It also comes with a handle which is useful for transportation.
  · The top surface is configured of a 25 mm matrix of tapped holes for both M4 and M6 hole types. All holes are through holes.
  · Features M6 bolt holes for fixing to vibration removal boards.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	517.15 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Banc d'optique en aluminium

  SURUGA SEIKI

  Lightweight, and rust-proof. Can be used for constructing a linear optical experiment system using a dedicated carrier.
  
  [Features]
  · Can be directly mounted to a vibration removal board using M6 bolts.
  · Bench Width: 50 mm, Height: 25 mm. Low optical axis and high stability.
  · Products with a /ST at the end of the model number include a scale.
  · For total loads applied onto the optical bench, as a general rule, avoid unbalanced or concentrated loads and ensure that it is equal to or less than 10 times the weight of the bench itself.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	133.04 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Colonnes de tige de type mandrin

  SURUGA SEIKI

  Holds items via a collet type tightening method. This ensures excellent stability and more effective holding. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	107.47 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Plaque de glissière

  SURUGA SEIKI

  Can load and slide Opt Station holders. Can be used for adjusting the position shift of mirror holders, etc. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	64.74 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Colonne souple

  SURUGA SEIKI

  ø12 or ø20 rods can be fixed and freely positioned. Uses cam type fixing, meaning that three joints can handily be fixed using a single clamp knob.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	229.80 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Consoles, modèle à plaque

  SURUGA SEIKI

  [Features]
  · A stand for fixing rods with a length of 10 mm.
  · Also includes a 10 mm length rod.
  · Can be used as the rod stand for the Opt Station holder, fixing it in any position (360°).

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	64.52 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Plaque de base

  SURUGA SEIKI

  The base plate is compatible with a variety of stages.
  
  [Features]
  · A plate for connecting stages and holders to vibration removal boards with M6 tapped holes etc.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	32.29 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Vis de montage de base

  SURUGA SEIKI

  Used for fixing base plates and similar items to vibration removal boards etc. Can fix in any position.
  
  [Features]
  · Used for fixing base plates and similar items to vibration removal boards etc. Can fix in any position.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	24.56 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Fourche de montant

  SURUGA SEIKI

  A tool for fixing posts. Lightly secure by hand and then, after finely positioning, tighten with a hex wrench. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	32.79 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Base sur montant

  SURUGA SEIKI

  [Features]
  · A pedestal for posts.
  · Can be used, even when attached to a rod stand.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	21.30 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Mini banc d'optique

  SURUGA SEIKI

  Thin, lightweight, and rust-proof. Can be used for constructing a linear and low-optical axis optical experiment system using a dedicated carrier. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	38.72 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Supports pour mini-banc optique

  SURUGA SEIKI

  [Features]
  · A carrier for A16 optical benches.
  · For loads applied onto the optical bench carrier, as a general rule, avoid unbalanced or concentrated loads and ensure that it is equal to or less than 20 times the weight of the carrier itself.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	32.29 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Tige de console

  SURUGA SEIKI

  A stand used for adjusting the height of holders, etc. Rods can be securely fixed in place using two wire contacts and the point contact for the clamp screw. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	29.80 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Consoles à montée / descente haute précision

  SURUGA SEIKI

  [Features]
  · A rod stand capable of upward and downward micro movements.
  · After fixing the rod with the rod fixing knob, the rod can be moved upward and downward in fine increments by rotating the knurled adjustment knob.
  · After adjusting, fix using the vertical fixing clamps.
  · The range for micro movements is 10 mm.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	129.57 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Bague intermédiaire

  SURUGA SEIKI

  A part used for rod stands. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	20.11 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Réglage de la position de la plaque

  SURUGA SEIKI

  A positioning plate that is compatible with a variety of stages. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	39.01 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Support pour banc optique

  SURUGA SEIKI

  A carrier for the A10.
  
  [Features]
  · A carrier for optical benches.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	90.97 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Base pour commutation du trajet optique

  SURUGA SEIKI

  [Features]
  · Can be used for switching optical circuits by loading and sliding the Opt Station holder (reproducibility reference value: 10 seconds or so).
  · The slide-position is fixed by magnet. As such there is no locking mechanism.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	198.12 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Entretoise_40 pour hauteur de l'axe optique de nivellement

  SURUGA SEIKI

  [Features]
  · A 40 mm spacer for aligning the optical axis.
  · Used when the assembled height of the stage is insufficient in relation to the configured optical axis etc.
  · Features external dimensions of 40 × 40 mm. Can be used for 40 stages or Opt Station holders.
  · Available in dimensions of 10 mm to 50 mm in increments of 5 mm (by combining spacers).
  · More detailed adjustment is possible by using combinations of A50-H, R, J, V, W, X, and Y.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	24.43 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Entretoise_60 pour hauteur de l'axe optique de nivellement

  SURUGA SEIKI

  A spacer for aligning the optical axis. Used when the assembled height of the stage is insufficient in relation to the configured optical axis etc. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	25.86 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Plaque rotative

  SURUGA SEIKI

  Can load, 360° rotate, and fix at any position Opt Station holders. Can be easily rotated, making it ideal for routing optical circuits.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	97.57 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Colliers en croix rotatifs (pour charges lourdes)

  SURUGA SEIKI

  [Features]
  · A cross clamp for heavy loads.
  · Poles and rods can be rotated to any angle and then fixed.
  · Fixing is done using a split clamping method.
  · Features a slitted fixing section. Twist the clamp section to securely fix the object.
  · There are three types available for different combinations of applicable diameters.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	129.33 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Colliers en croix rotatifs, M5 (pour usage intensif)

  SURUGA SEIKI

  [Features]
  · A bolt type cross clamp for heavy loads. The bolt includes a hexagonal socket head.
  · Poles and rods can be rotated to any angle and then fixed.
  · Fixing is done using a split clamping method.
  · Fixing is done by tightening the M5 bolts.
  · Features a slitted fixing section. Twist the clamp section to securely fix the object.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	118.02 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Collier en croix rotatif

  SURUGA SEIKI

  A cross clamp for fixing a pole or a rod at an arbitrary angle. Poles and rods are fixed using the clamp. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	45.75 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Collier en croix, modèle monté (pour charge lourde)

  SURUGA SEIKI

  [Features]
  · A cross clamp for heavy loads.
  · Poles or rods can be orthogonally connected.
  · Fixing is done using split clamping.
  · Features a slitted fixing section. Twist the clamp section to securely fix the object.
  · There are three types available for different combinations of applicable diameters.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	103.39 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Collier en croix, modèle monté M5 (pour charge lourde)

  SURUGA SEIKI

  [Features]
  · A bolt type cross clamp for heavy loads. The bolt includes a hexagonal socket head.
  · Poles or rods can be orthogonally connected.
  · Fixing is done using split clamping.
  · Fixing is done by tightening the M5 bolts.
  · Features a slitted fixing section. Twist the clamp section to securely fix the object.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	55.58 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Collier en croix sur support

  SURUGA SEIKI

  A cross clamp for orthogonally connecting poles or rods. Poles and rods are fixed using the clamp. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	36.52 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Plaque de base universelle

  SURUGA SEIKI

  A base plate for placing rod stands onto vibration removal boards at any position. Fixes to vibration removal boards using the included clamp. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	61.21 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Plaques adaptatrices (pour étages et consoles de tige)

  SURUGA SEIKI

  An adapter plate that is compatible with a variety of stages. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	25.75 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Adaptateur de conversion

  CHUO PRECISION INDUSTRIAL

  The adapter is used for conversions when using shafts or poles of the same thread diameter but different pitches etc.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	31.76 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Plaques adaptatrices

  CHUO PRECISION INDUSTRIAL

  Spacers use a M16P1 screw on the stage, and are for using M6 counterbore holes in an M4 counterbore hole.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	38.20 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

Loading...