Raccords en résine fluorée（Matériau du corps principal：PFA）

?* À propos du délai d'expédition et des prix

• 

  LQ3B-F, Raccord spécial, haute pureté, type évasé, raccord fileté, pouce

  SMC

  Heat-stress resistant fluoropolymer pipe fitting.
  [Features]
  · Flare-type collet construction.
  · Triple-seal construction.
  · Ease of installation.
  · Excellent flow-through characteristics.
  · Excellent heat resistance.
  · Can be used at 200°C.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	37.16 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  Raccord en T en résine fluorée F-MBT

  NIHON PISCO

  Offre une étanchéité et une résistance à l'arrachement élevées. Une bague d'impact maintient fermement le tuyau.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	44.65 €
  Délai d'expédition minimum ：	12 jours

  *Prix unitaire/configuration de base

• 

  Raccord PILLAR de type Super 300, coude mâle

  PILLAR

  The SUPER-300 type PILLAR fitting is completely a new joint made of fluororesin, which can fully and securely meet the sophisticated and diversified requests such as "Safety," "Cleanliness," "Application at high temperature," "Compatibility to piping size," etc., the essential items in semiconductor liquid crystal manufacturing process.
  ◆ Reduction in tightening torque by updated sealing mechanism
  Since the sealing force acts in radial direction as well as in thrust direction, this fitting is so constructed as to provide the stabilized sealing performance for a long time within wide temperature range, and to be resistible against heat cycle.
  ◆ Greatly enhanced workability due to simplified tightening control
  The adoption of gauge ring made it possible to execute the union nut tightening control with sound, tactile impression and visual method, which greatly improved the workability. Further it has eliminated the fluctuation in execution such as insufficient tightening, excessive tightening, etc., thus assuring the safe and stabilized performance.
  ◆ Excellent sealing performance
  Exhibits high sealing performance against each chemical liquid. Even the removal liquid having high penetration performance will not be oozed out.
  ◆ Radical reduction in micro-bubble and liquid accumulation
  Since the flow passage sectional area is little decreased due to tightening of union nut, the flow passage will not be interfered. Besides, the micro-bubble/liquid accumulation was radically reduced due to adoption of special shape sleeve.
  ◆ high working pressure/temperature
  The maximum working temperature is 200°C, and the tube holding strength is over the burst pressure of tube.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	33.23 €
  Délai d'expédition minimum ：	13 jours

  *Prix unitaire/configuration de base

• 

  Raccord PILLAR de type Super 300, connecteur mâle

  PILLAR

  The SUPER-300 type PILLAR fitting is completely a new joint made of fluororesin, which can fully and securely meet the sophisticated and diversified requests such as "Safety," "Cleanliness," "Application at high temperature," "Compatibility to piping size," etc., the essential items in semiconductor liquid crystal manufacturing process.
  ◆ Reduction in tightening torque by updated sealing mechanism
  Since the sealing force acts in radial direction as well as in thrust direction, this fitting is so constructed as to provide the stabilized sealing performance for a long time within wide temperature range, and to be resistible against heat cycle.
  ◆ Greatly enhanced workability due to simplified tightening control
  The adoption of gauge ring made it possible to execute the union nut tightening control with sound, tactile impression and visual method, which greatly improved the workability. Further it has eliminated the fluctuation in execution such as insufficient tightening, excessive tightening, etc., thus assuring the safe and stabilized performance.
  ◆ Excellent sealing performance
  Exhibits high sealing performance against each chemical liquid. Even the removal liquid having high penetration performance will not be oozed out.
  ◆ Radical reduction in micro-bubble and liquid accumulation
  Since the flow passage sectional area is little decreased due to tightening of union nut, the flow passage will not be interfered. Besides, the micro-bubble/liquid accumulation was radically reduced due to adoption of special shape sleeve.
  ◆ high working pressure/temperature
  The maximum working temperature is 200°C, and the tube holding strength is over the burst pressure of tube.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	30.76 €
  Délai d'expédition minimum ：	13 jours

  *Prix unitaire/configuration de base

• 

  LQ1H, Raccord d'une grande pureté en fluoropolymère, connexions filetées - Modèle à connecteur

  SMC

  A fluoropolymer tube fitting with strong resistance to tube bending and deformation.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · For use at 200°C.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · The tube size can be changed.
  · Easy nut fastening.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	14.90 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Raccords en plastique fluoré / Raccord de tuyauterie en polymère fluoré / Série LQ1 / Filetage mâle / Taille en pouces

  SMC

  A fluoropolymer male connector fitting for use at temperatures of 200°C.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · Strong resistance to tube bending and deformation.
  · Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	14.92 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Raccords en fluoropolymère / Raccords de tuyauterie en fluoropolymère / Série LQ1 / Filetage interne / Taille métrique

  SMC

  A fluoropolymer female connector fitting for use at temperatures of 200°C.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · Strong resistance to tube bending and deformation.
  · Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	23.44 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Raccords en fluoropolymère / Raccords de tuyauterie en fluoropolymère / Série LQ1 / Filetage interne / Taille en pouces

  SMC

  A fluoropolymer female connector fitting for use at temperatures of 200°C.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · Strong resistance to tube bending and deformation.
  · Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	26.63 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  LQ1L, Raccord d'une grande pureté en fluoropolymère, connexions filetées - Modèle à raccord

  SMC

  A fluoropolymer male elbow fitting for use at temperatures of 200°C.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · Strong resistance to tube bending and deformation.
  · Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	16.45 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  LQ1L, Raccord d'une grande pureté en fluoropolymère, connexions filetées - Modèle à raccord

  SMC

  A fluoropolymer tube fitting with strong resistance to tube bending and deformation.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · For use at 200°C.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · The tube size can be changed.
  · Easy nut fastening.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	16.45 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Raccords en fluoropolymère / Raccords de tuyauterie en fluoropolymère / Série LQ1 / Coude femelle / Taille métrique

  SMC

  A fluoropolymer female elbow fitting for use at temperatures of 200°C.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · Strong resistance to tube bending and deformation.
  · Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	27.95 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Raccords en fluoropolymère / Raccords de tuyauterie en fluoropolymère / Série LQ1 / Coude avec filetage femelle / taille impériale

  SMC

  A fluoropolymer female elbow fitting for use at temperatures of 200°C.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · Strong resistance to tube bending and deformation.
  · Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	27.95 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  LQ1R, Raccord d'une grande pureté en fluoropolymère, connexions filetées - Té en bout

  SMC

  A fluoropolymer fitting with a quadruple-sealing construction.
  [Features]
  · Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · For use at 200°C
  · The trapezoidal thread allows for the application of high levels of torque. The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · The tube support allows it to withstand use with lateral loads.
  · Simply screw-in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	33.97 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  LQ1R-M, Té mâle en bout Raccords en fluoropolymère / Hyper raccords en pouces

  SMC

  A fluoropolymer fitting with a tube holding section on the nut that utilizes a 2-stage system for securely holding tubes in place.
  [Features]
  · Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · For use at 200°C.
  · The seal lock on the nut helps prevent loosening. The trapezoidal thread allows for the application of high levels of torque.
  · Strong resistance to tube bending and deformation.
  · Easy nut fastening
  · Simply screw-in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	33.97 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  Raccords en fluoropolymère / Raccords de tuyauterie en fluoropolymère / Série LQ1 / Té femelle / Taille métrique

  SMC

  A fluoropolymer female run tee fitting for use at temperatures of 200°C.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · Strong resistance to tube bending and deformation.
  · Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	46.60 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  LQ1R-F, Té femelle en bout Raccords en fluoropolymère / Hyper raccords en pouces

  SMC

  A fluoropolymer female run tee fitting for use at temperatures of 200°C.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · Strong resistance to tube bending and deformation.
  · Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	42.27 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  Raccords en fluoropolymère / Raccords de tuyauterie en fluoropolymère / Série LQ1 / Té mâle / taille métrique

  SMC

  A fluoropolymer fitting with a tube holding section on the nut that utilizes a 2-stage system for securely holding tubes in place.
  [Features]
  · Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · For use at 200°C.
  · The seal lock on the nut helps prevent loosening. The trapezoidal thread allows for the application of high levels of torque.
  · Strong resistance to tube bending and deformation.
  · Easy nut fastening
  · Simply screw-in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	33.97 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  LQ1B-M, Té de branchement mâle Raccords en fluoropolymère / Hyper raccords en pouces

  SMC

  A fluoropolymer tube fitting with strong resistance to tube bending and deformation.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · For use at 200°C.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · The tube size can be changed.
  · Easy nut fastening.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	33.97 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  Raccords en fluoroplastique / Raccords en fluoropolymère / Série LQ1 / T femelle / taille métrique

  SMC

  A fluoropolymer female branch tee fitting for use at temperatures of 200°C.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · Strong resistance to tube bending and deformation.
  · Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	42.27 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  LQ1B-F, Raccords en té femelle en pouces en fluoropolymère / Hyper raccords

  SMC

  A fluoropolymer female branch tee fitting for use at temperatures of 200°C.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · Strong resistance to tube bending and deformation.
  · Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	42.27 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  LQ1E, Raccord d'une grande pureté en fluoropolymère, connexions à l'aide d'un tuyau, Coude égal

  SMC

  A fluoropolymer fitting with a tube holding section on the nut that utilizes a 2-stage system for securely holding tubes in place.
  [Features]
  · Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · Shows strong resistance to tube bending and deformation. The tube support allows it to withstand use with lateral loads.
  · Simply screw-in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
  · For use at 200°C. The trapezoidal thread prevents the angled insertion of nuts.
  · The reducer system allows you to switch tube sizes without having to change the body itself.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	19.45 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  LQ1E, Raccord d'une grande pureté en fluoropolymère, connexions à l'aide d'un tuyau, Coude égal

  SMC

  A union elbow with outstanding flow-through characteristics with minimized liquid pooling.
  [Features]
  · Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · For use at 200°C.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · Strong resistance to tube bending and deformation.
  · Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	19.52 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  LQ1T, Raccord d'une grande pureté en fluoropolymère, connexions à l'aide d'un tuyau, Té égal

  SMC

  A fluoropolymer union tee fitting for use at temperatures of 200°C.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · Strong resistance to tube bending and deformation.
  · Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	25.27 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  LQ1T, Raccord d'une grande pureté en fluoropolymère, connexions à l'aide d'un tuyau, Té égal

  SMC

  A fluoropolymer fitting with a tube holding section on the nut that utilizes a 2-stage system for securely holding tubes in place.
  [Features]
  · Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · Shows strong resistance to tube bending and deformation. The tube support allows it to withstand use with lateral loads.
  · Simply screw-in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
  · For use at 200°C. The trapezoidal thread prevents the angled insertion of nuts.
  · The reducer system allows you to switch tube sizes without having to change the body itself.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	25.68 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Raccords en fluoropolymère / Raccords de tuyauterie en fluoropolymère / Série LQ1 / Raccord pour montage sur panneau / Taille métrique

  SMC

  A panel mount union with outstanding flow-through characteristics with minimized liquid pooling.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · For use at 200°C.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · Strong resistance to tube bending and deformation.
  · Easy nut fastening.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	21.27 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Raccords en fluoroplastique / Raccords en fluoropolymère / Série LQ1 / Raccord pour montage sur panneau / Taille en pouces

  SMC

  A fluoropolymer panel mount union fitting for use at temperatures of 200°C.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · Strong resistance to tube bending and deformation.
  · Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	21.73 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  LQ1U, Raccord spécialisé, haute pureté, connexion de tube, union

  SMC

  A union with outstanding flow-through characteristics with minimized liquid pooling.
  [Features]
  · Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · For use at 200°C.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · Strong resistance to tube bending and deformation.
  · Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	19.06 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  LQ1U, Raccord spécialisé, haute pureté, connexion de tube, union

  SMC

  A fluoropolymer fitting with strong resistance to tube bending and deformation.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · For use at 200°C.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · The tube size can be changed.
  · Easy nut fastening.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	19.52 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  LQ1F, Raccord spécialisé, haute pureté, connexion de tube, bride union

  SMC

  A metric size type fluoropolymer fitting with outstanding sealing performance and leakage-prevention reliability.
  [Features]
  · Quadruple-seal construction.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · For use at 200°C.
  · The seal lock on the nut helps prevent loosening. The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · Strong resistance to tube bending and deformation. The tube support allows it to withstand use with lateral loads.
  · Simply screw in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	176.47 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  LQ1F, Raccord spécialisé, haute pureté, connexion de tube, bride union

  SMC

  A fluoropolymer fitting with a trapezoidal thread that allows for the application of high levels of torque.
  [Features]
  · Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · For use at 200°C.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · The tube support allows it to withstand use with lateral loads.
  · Simply screw-in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	176.40 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  Raccords en fluoropolymère / Raccords de tuyauterie en fluoropolymère / Série LQ1 / Raccord avec réducteur / Taille métrique

  SMC

  A reducing type fluoropolymer union elbow fitting for use at temperatures of 200°C.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · Strong resistance to tube bending and deformation.
  · Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	76.94 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  Raccords en fluoropolymère / Raccords de tuyauterie en fluoropolymère / Série LQ1 / Raccord avec réducteur / Taille en pouces

  SMC

  A fluoropolymer fitting with a tube holding section on the nut that utilizes a 2-stage system for securely holding tubes in place.
  [Features]
  · The quadruple-sealing construction provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · For use at 200°C.
  · The seal lock on the nut helps prevent loosening. The trapezoidal thread allows for the application of high levels of torque.
  · Strong resistance to tube bending and deformation.
  · Easy nut fastening
  · Simply screw-in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	50.73 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  Raccords en fluoropolymère / Raccords de tuyauterie en fluoropolymère / Série LQ1 / Té / taille métrique

  SMC

  A fluoropolymer fitting with outstanding sealing performance and leakage-prevention reliability.
  [Features]
  · Quadruple-seal construction.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · For use at 200°C.
  · The seal lock on the nut helps prevent loosening. The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · Strong resistance to tube bending and deformation. The tube support allows it to withstand use with lateral loads.
  · Simply screw in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	54.87 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  Raccords en fluoroplastique / Raccords en fluoropolymère / Série LQ1 / Té / pouce

  SMC

  A reducing type fluoropolymer union tee fitting for use at temperatures of 200°C.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · Strong resistance to tube bending and deformation.
  · Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	54.87 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  Raccords en fluoropolymère / Raccords de tuyauterie en fluoropolymère / Série LQ1 / Raccord réducteur / Taille métrique

  SMC

  A reducing type union with outstanding flow-through characteristics with minimized liquid pooling.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · For use at 200°C.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · Strong resistance to tube bending and deformation.
  · Easy nut fastening.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	71.29 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  Raccords en fluoropolymère / Raccords de tuyauterie en fluoropolymère / Série LQ1 / Raccord réducteur / taille impériale

  SMC

  A reducing-type fluoropolymer union fitting for use at temperatures of up to 200°C.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · The seal lock on the nut helps prevent loosening.
  · The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · Strong resistance to tube bending and deformation.
  · Simply screw-in as far as the ends of the fitting to tighten the nut. No need for gauge management for positioning.
  · The trapezoidal thread prevents the angled insertion of nuts.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	71.29 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  Raccords en fluoropolymère / Raccords de tuyauterie en fluoropolymère / Série LQ1 / Coude à faible encombrement avec écrou / Taille métrique

  SMC

  The LQ1E-SS is a space-saving fluoropolymer elbow fitting from SMC.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides excellent sealing performance.
  · High leakage-prevention reliability.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · For use at 200°C.
  · The seal lock on the nut helps prevent loosening.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	63.74 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  Raccords en fluoropolymère / Raccords de tuyauterie en fluoropolymère / Série LQ1 / Coude à faible encombrement avec écrou / Taille en pouces

  SMC

  The LQ1E-SS-R is a reducing-type space-saving fluoropolymer elbow fitting from SMC.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides excellent sealing performance.
  · High leakage-prevention reliability.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · For use at 200°C.
  · The seal lock on the nut helps prevent loosening.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	64.15 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  LQ1T-S, Raccord spécial, haute pureté, gain de place, union Té

  SMC

  A fluoropolymer union tee fitting by SMC.
  [Features]
  · Metric size.
  · The tube can be positioned freely.
  · Quadruple-seal construction.
  · Offers outstanding flow-through characteristics.
  · For use at 200°C.
  · Excellent at preventing loosening.
  · Strong resistance to tube bending and deformation.
  · Easy nut fastening.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	65.65 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  Raccords en fluoropolymère / Raccords de tuyauterie en fluoropolymère / Série LQ1 / Té à faible encombrement / Taille en pouces

  SMC

  The LQ1T-ST Inch Size is a space saving fluoropolymer union tee fitting from SMC.
  [Features]
  · Quadruple-seal construction.
  · Flow-through characteristics.
  · For use at 200°C.
  · Prevents loosening.
  · A design with strong resistance to tube bending and deformation.
  · Easy nut fastening.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	66.02 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  Raccords en fluoropolymère / Raccords de tuyauterie en fluoropolymère / Série LQ1 / Té réducteur à faible encombrement / Taille en pouces

  SMC

  A fluoropolymer union tee fitting by SMC.
  [Features]
  · Inch size.
  · The tube can be positioned freely.
  · Quadruple-seal construction.
  · Offers outstanding flow-through characteristics.
  · For use at 200°C.
  · Excellent at preventing loosening.
  · Strong resistance to tube bending and deformation.
  · Easy nut fastening.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	155.58 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  Raccords en fluoropolymère / Raccords de tuyauterie en fluoropolymère / Série LQ1 / Coude d'extension de tuyau / Taille métrique

  SMC

  A fluoropolymer union elbow fitting with excellent anti-liquid leakage performance.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · For use at 200°C.
  · The seal lock on the nut helps prevent loosening. The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · Strong resistance to tube bending and deformation. The tube support allows it to withstand use with lateral loads.
  · Simply screw in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	54.29 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  LQ1T-T, Raccord spécialisé, haute pureté, connexion de tube, raccord en T pour rallonge de tube

  SMC

  A fluoropolymer union elbow fitting with excellent anti-liquid leakage performance.
  [Features]
  · Unique quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · For use at 200°C.
  · The seal lock on the nut helps prevent loosening. The trapezoidal thread allows for the application of high levels of torque.
  · The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · Strong resistance to tube bending and deformation. The tube support allows it to withstand use with lateral loads.
  · Simply screw-in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	54.29 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  Raccords en fluoroplastique / Raccords en fluoropolymère / Série LQ1 / Té avec extension de tube / taille métrique

  SMC

  Tubing extension union tee with excellent anti-liquid leakage performance.
  [Features]
  · Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · For use at 200°C.
  · The seal lock on the nut helps prevent loosening. The trapezoidal thread allows for the application of high levels of torque.
  　The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · The tube support allows it to withstand use with lateral loads.
  · Simply screw in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	131.27 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  Raccords en fluoropolymère / Raccords de tuyauterie en fluoropolymère / Série LQ1 / Té avec extension de tuyau / Taille en pouces

  SMC

  Tubing extension union tee with excellent anti-liquid leakage performance.
  [Features]
  · Quadruple-sealing construction (PAT.) provides a strong sealing effect and highly reliable performance against the leakage of liquids.
  · Offers outstanding flow-through characteristics with minimized liquid pooling.
  · For use at 200°C.
  · The seal lock on the nut helps prevent loosening. The trapezoidal thread allows for the application of high levels of torque.
  　The tube holding section on the nut utilizes a 2-stage system for securely holding tubes in place.
  · The tube support allows it to withstand use with lateral loads.
  · Simply screw-in as far as the ends of the fitting to tighten the nuts. No need for gauge management for positioning.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	62.81 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

Loading...